1. 03 Nov, 2017 1 commit
    • Soby Mathew's avatar
      Fix PSCI STAT time stamp collection · bfc87a8d
      Soby Mathew authored
      
      
      This patch includes various fixes for PSCI STAT functionality
      relating to timestamp collection:
      
      1. The PSCI stat accounting for retention states for higher level
      power domains were done outside the locks which could lead to
      spurious values in some race conditions. This is moved inside
      the locks. Also, the call to start the stat accounting was redundant
      which is now removed.
      
      2. The timestamp wrap-around case when calculating residency did
      not cater for AArch32. This is now fixed.
      
      3. In the warm boot path, `plat_psci_stat_accounting_stop()` was
      getting invoked prior to population of target power states. This
      is now corrected.
      
      Change-Id: I851526455304fb74ff0a724f4d5318cd89e19589
      Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      bfc87a8d
  2. 26 Oct, 2017 1 commit
  3. 25 Oct, 2017 3 commits
  4. 24 Oct, 2017 2 commits
  5. 18 Oct, 2017 3 commits
  6. 17 Oct, 2017 3 commits
  7. 16 Oct, 2017 13 commits
  8. 13 Oct, 2017 2 commits
  9. 05 Oct, 2017 1 commit
    • Soby Mathew's avatar
      GICv3: add functions for save and restore · ebf1ca10
      Soby Mathew authored
      
      
      During system suspend, the GICv3 Distributor and Redistributor context
      can be lost due to power gating of the system power domain. This means
      that the GICv3 context needs to be saved prior to system suspend and
      restored on wakeup. Currently the consensus is that the Firmware should
      be in charge of this. See tf-issues#464 for more details.
      
      This patch introduces helper APIs in the GICv3 driver to save and
      restore the Distributor and Redistributor contexts. The GICv3 ITS
      context is not considered in this patch because the specification says
      that the details of ITS power management is implementation-defined.
      These APIs are expected to be appropriately invoked by the platform
      layer during system suspend.
      
      Fixes ARM-software/tf-issues#464
      
      Change-Id: Iebb9c6770ab8c4d522546f161fa402d2fe02ec00
      Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      Signed-off-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
      ebf1ca10
  10. 04 Oct, 2017 1 commit
    • Jeenu Viswambharan's avatar
      TSP: Support multi-threading CPUs on FVP · 5e4ca661
      Jeenu Viswambharan authored
      Commit 11ad8f20
      
       added supporting
      multi-threaded CPUs on FVP platform, including modifications for
      calculating CPU IDs. This patch imports the strong definition of the
      same CPU ID calculation on FVP platform for TSP.
      
      Without this patch, TSP on FVP was using the default CPU ID calculation,
      which would end up being wrong on CPUs with multi-threading.
      
      Change-Id: If67fd492dfce1f57224c9e693988c4b0f89a9a9a
      Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      5e4ca661
  11. 27 Sep, 2017 1 commit
  12. 25 Sep, 2017 2 commits
    • Roberto Vargas's avatar
      mem_protect: Add DRAM2 to the list of mem protected ranges · b09ba056
      Roberto Vargas authored
      
      
      On ARM platforms, the maximum size of the address space is limited
      to 32-bits as defined in arm_def.h. In order to access DRAM2, which
      is defined beyond the 32-bit address space, the maximum address space
      is increased to 36-bits in AArch64. It is possible to increase the
      virtual space for AArch32, but it is more difficult and not supported
      for now.
      
      NOTE - the actual maximum memory address space is platform dependent
      and is checked at run-time by querying the PARange field in the
      ID_AA64MMFR0_EL1 register.
      
      Change-Id: I6cb05c78a63b1fed96db9a9773faca04a5b93d67
      Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      b09ba056
    • Roberto Vargas's avatar
      mem_protect: Add mem_protect support in Juno and FVP for DRAM1 · f145403c
      Roberto Vargas authored
      
      
      mem_protect needs some kind of non-volatile memory because it has
      to remember its state across reset and power down events.
      The most suitable electronic part for this feature is a NVRAM
      which should be only accesible from the secure world. Juno and
      FVP lack such hardware and for this reason the MEM_PROTECT
      functionality is implemented with Flash EEPROM memory on both
      boards, even though this memory is accesible from the non-secure
      world. This is done only to show a full implementation of
      these PSCI features, but an actual system shouldn't use a
      non-secure NVRAM to implement it.
      
      The EL3 runtime software will write the mem_protect flag and BL2
      will read and clear the memory ranges if enabled. It is done in
      BL2 because it reduces the time that TF needs access to the full
      non-secure memory.
      
      The memory layout of both boards is defined using macros which
      take different values in Juno and FVP platforms. Generic platform
      helpers are added that use the platform specific macros to generate
      a mem_region_t that is valid for the platform.
      
      Change-Id: I2c6818ac091a2966fa07a52c5ddf8f6fde4941e9
      Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      f145403c
  13. 22 Sep, 2017 2 commits
  14. 21 Sep, 2017 2 commits
    • Sandrine Bailleux's avatar
      FVP: Include utils_def.h instead of utils.h · d08f8c6a
      Sandrine Bailleux authored
      platform_def.h doesn't need all the definitions in utils.h,
      the ones in utils_def.h are enough. This patch is related
      to the changes introduced by commit 53d9c9c8
      
      .
      
      Change-Id: I4b2ff237a2d7fe07a7230e0e49b44b3fc2ca8abe
      Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      d08f8c6a
    • Antonio Nino Diaz's avatar
      Fix type of `unsigned long` constants · e47ac1fd
      Antonio Nino Diaz authored
      
      
      The type `unsigned long` is 32 bit wide in AArch32, but 64 bit wide in
      AArch64. This is inconsistent and that's why we avoid using it as per
      the Coding Guidelines. This patch changes all `UL` occurrences to `U`
      or `ULL` depending on the context so that the size of the constant is
      clear.
      
      This problem affected the macro `BIT(nr)`. As long as this macro is used
      to fill fields of registers, that's not a problem, since all registers
      are 32 bit wide in AArch32 and 64 bit wide in AArch64. However, if the
      macro is used to fill the fields of a 64-bit integer, it won't be able
      to set the upper 32 bits in AArch32.
      
      By changing the type of this macro to `unsigned long long` the behaviour
      is always the same regardless of the architecture, as this type is
      64-bit wide in both cases.
      
      Some Tegra platform files have been modified by this patch.
      
      Change-Id: I918264c03e7d691a931f0d1018df25a2796cc221
      Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      e47ac1fd
  15. 18 Sep, 2017 1 commit
  16. 13 Sep, 2017 2 commits