GitLab

This flag warns if anything is declared more than once in the same
scope, even in cases where multiple declaration is valid and changes
nothing.

Consequently, this patch also fixes the issues reported by this
flag. Consider the following two lines of code from two different source
files(bl_common.h and bl31_plat_setup.c):

IMPORT_SYM(uintptr_t, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_START__, BL2_RO_BASE);

The IMPORT_SYM macro which actually imports a linker symbol as a C expression.
The macro defines the __RO_START__ as an extern variable twice, one for each
instance. __RO_START__ symbol is defined by the linker script to mark the start
of the Read-Only area of the memory map.

Essentially, the platform code redefines the linker symbol with a different
(relevant) name rather than using the standard symbol. A simple solution to
fix this issue in the platform code for redundant declarations warning is
to remove the second IMPORT_SYM and replace it with following assignment

static const unsigned long BL2_RO_BASE = BL_CODE_BASE;

Change-Id: If4835d1ee462d52b75e5afd2a59b64828707c5aa
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Id3d3efc7e7711d19f0223da823713b8390ad2f47

Create a function to check for fpga readiness, and move the checking out
of bridge enable function.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3f473ffeffa9ce181a48977560c8bda19c6123c0

This is to make sure that bridge access in disabled before doing full
FPGA reconfiguration and turn re-enable it once the configuration
succeed.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1f42fbf04ac1625048bbdf21b8a0443464ed833d

SiP CONFIG_ISDONE now will query status for either CONFIG_STATUS or
RECONFIG_STATUS based on passed parameter
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Idb8a84af4e98654759843de09a289d31246c9a91

Refactored system manager driver to be shared across both intel platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ic4d056c3d15c3152403dc11641c2452770a6162d

Refactor reset manager into intel common platform directory as it can be
shared by both Stratix 10 and Agilex. Register address and field is now
referred through macros.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Id6d50f2a2f5a6bd8d6746b84602ac17ec7f6c07a

Add bridge enablement features for each platform.
The bridge access will be enabled automatically for FPGA 1st
configuration only.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I264757b257a209e1c3c4206660f21c5d67af0d2f

Combine both peripheral and bridge non-secure access code
into a single callable function
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I38d335ed8d1e9f55d337b63cca121a473897ef70

UEFI decompression will fail if the payload size is too large and the load
address is too low. This patch moves the payload to a higher address to fix
the issue
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I36087fbd2237b62891c59dbe2d34336bddfaa396

All function in socfpga_sip_svc.c should only be called locally except
sip_smc_handler().
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib84ef9a2e521967baa4cfd32e6bc569dd3a5d2f5

This patch removes un-needed r/w parameter checks for qspi driver. The
driver can actually access any offset and size.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: If60b2c016aa91e2c24ddc57c6ad410c8dc5dcf53

In further patches, we wish to enable -wredundant-decls check as
part of warning flags by default.

Change-Id: I43410d6dbf40361a503c16d94ccf0f4cf29615b7
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Increase calibration delay to cater for HPS 1st mode and
reduce clear emif delay which takes too long
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1a50a5d8a6518ba085d853cb636efa07326552b4

Add support for platform specific warm-reset through psci system reset 2.

- system_reset2 implementation that calls for l2 cache reset
- Check for magic number and request for warm reset in bl2
- Create a shared reset manager header file for Agilex and Stratix 10
- Clean up parameter info in plat_get_next_bl_params
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3fdd9a2711c80d9bd3dc05b81527781d840bd726

Enable access to secure registers by non-secure world through secure
monitor calls
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I80610e08c7cf31f17f47a7597c269131a8de2491

Fix FPGA reconfiguration driver logic
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0299c1a71f3456e9b441340314662494b8d3e4a0

Mailbox driver now handles variable response length
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ic96854fdaadaf48379c5de688392df974e1c99c3

Modify mailbox config return code to improve debugging.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0a223291f4c5296203b3295a679a5857a446c692

Fix mailbox driver urgent command handling, doorbell routine,
and logic optimization.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: If536a383f449ca2a68d60274303ec24f92411505

Fixes the SiP Service driver that is responsible for FPGA
reconfiguration. Also change the base address of FPGA reconfiguration
to 0x400000.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I2b84c12c85cd5fc235247131fec4916ed2fb56c8

There are a few issues in mailbox that needs to be fixed.
- Send doorbell after an indirect cmd
- Do not ring doorbell when polling mailbox response as it should've been
sent by send_cmd
- remove unneeded cmd_free_offset check
- Fix mailbox initialization
- Fix get_config_status returning a wrong status when the status is busy
- Add command length in mailbox command header
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: If613e2ca889a540a616c62d69ad0086a7cd46536

Add-in support for handling BL31 parameter from non-BL2 image, ie. SPL
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I16118d791399f652b6d1093c10092935a3449c32

Load BL31 to DDR instead of On-Chip RAM for scalability. Also, make use
of On-Chip RAM for BL31 specific variables filling down from handoff
offset to reduce fragmentation
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib64f48bd14f71e5fca2d406f4ede3386f2881099

This patch will provide an entrypoint for uboot's spl into BL31.
BL31 will also handle secondary cpu state during uboot's cold boot
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I661bdb782c2d793d5fc3c7f78dd7ff746e33b7a3

Move the get_config_status out of sip_svc driver.
Modify the function so that it can return either
CONFIG_STATUS or RECONFIG_STATUS
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642d5900339e67f98be61380edc2b838e0dd47af

Separate SiP related definition from mailbox header file
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I45ba540f29d9261007f7ec23469358747cf140b4

remove plat_sip_svc.c and plat_psci.c in stratix 10 platform directory
as both has been refactored to common directory for sharing with agilex
platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I395fed66408f536e8fefd637681e742c63621818

Removes unused source code for BL2 and BL31 in platform.mk.
Clean-up unused header files, syntax fixes, and alphabetical
sorting post-refactoring
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ie5ea9b4d3abdb0187cddeb04d2fcfb51fbe5c4dd

Pull out SiP & PSCI service driver into socfpga common directory.
Remove deassert_peripheral_reset from cold reset procedure as it is not
needed.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1a0390fca6db4c89919a2a038de2a9d96c3ae4fd

Pull out mailbox driver into common area as they can be shared between
intel's socfpga platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4064de1ec668931d77abcb7804f6952b70d33716

Share socfpga private definitions and storage driver between Agilex and
Stratix 10 platform.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I6da147f4d2df4a97c505d4bbcffadf63bc3bf4a5

Pull out handoff driver to intel/soc/ common directory as they can be
shared by both Agilex and Stratix10 platform.

Share platform_def header between both Agilex and Stratix10 and store
platform specific definitions in socfpga_plat_def.h
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I8eff1afd7ee71704a36a54fad732ede4f557878d

Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06

Disable gic cpu interface for powered down cpu. This patch also removes
core reset during power off as core reset will be done during power on
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2ca96d876b6e71e56d24a9a7e184b6d6226b8673

Driver will calculate DDR size instead of using hardcoded value
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642cf2180929965ef12bd5ae4393b2f3d0dcddde

To provide glitchless clock to downstream logic even if clock toggles
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I728d64d0ba3b4492125bea5b0737fc83180356f1

Increase calibration delay, fix ddrio control config & nonsecure region
limit
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ibca3c247a3ad5104176ca9057d29755599f13c9b

Extract clock information for UART, MMC & Watchdog from the clock manager
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I42d3d4ceeaf45788d457472f6ddcd3fe099f0133

Extract clock information for UART, MMC & Watchdog from the platform
rather than hard code it
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2582bd34a6da97bd75d5ccba5f93840e65f26b03