GitLab

Recently upstreamed changes to OP-TEE mean that it is possible for OP-TEE
to provide a DTB overlay directly to subsequent boot stages thus negating
the requirement to bundle a DTB in the FIP.

This patch switches off the dependency on the DTB in the FIP descriptor
instead we will provide the necessary data as an overlay from OP-TEE.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

On i.MX8QM/i.MX8QX with system controller inside, the CPU's clock
rate is managed by SCFW(system controller firmware) and can ONLY be
changed from secure world, so SIP runtime service is needed for
setting CPU's clock rate, this patch adds cpu-freq SIP runtime service
support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

On i.MX8QM/i.MX8QX with system controller inside, the SRTC is
managed by SCFW(system controller firmware) and some functions
like setting SRTC's time etc. can ONLY be requested from secure
world, so SIP runtime service is needed for such kind of operations,
this patch adds SRTC SIP runtime service support for i.MX8QM and
i.MX8QX.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

NXP's i.MX8 SoCs have system controller (M4 core) which takes
control of timer management, including watchdog, srtc and system
counter etc., other clusters like Cortex-A35 can send out command
via MU (Message Unit) to system controller for timer operation.

This patch adds timer IPC(inter-processor communication) support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

In case if `RPI3_PRELOADED_DTB_BASE` isn't defined explicitly with
proper pre-loaded DTB address, `add_define` macro defined in
`make_helpers/build_macros.mk` still supplies this definition to the
compiler like `-DRPI3_PRELOADED_DTB_BASE`, and it's obviously is set to
default value 1.

This simply leads to the wrong `MAP_NS_DTB` region definition (base_va
is set `0x1` instead of `0x00010000`) in `plat/rpi3/rpi3_common.c`:

Which causes aligment check to fail in `mmap_add_region_check()`:
VERBOSE: base_pa: 0x00000001, base_va: 0x00000001, size: 0x00010000
...
ERROR:   mmap_add_region_check() failed. error -22
Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>

This patch removes unused type conversions as all the relevant macros
now use U()/ULL(), making these explicit typecasts unnecessary.

Change-Id: I01fb534649db2aaf186406b1aef6897662b44fe3
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch enables L2 error correction and parity protection
for Tegra210 on boot and exit from suspend. The previous bootloader
sets the boot parameter, indicating ECC reporting, only for B01 SKUs.

Change-Id: I6927884d375a64c69e2f1e9aed85f95c5e3cb17c
Signed-off-by: Sam Payne <spayne@nvidia.com>

This patch skips the BTB invalidate workaround for Tegra210-B01 chips, as
they have already been fixed in the hardware. To allow the .S file to
include macros, add proper guards to tegra_platform.h.

Change-Id: I0826d3c54faeffc9cb0709331f47cbdf25d4b653
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

Set MC Clients ordering as per the clients needs(ordered, BW, ISO/non-ISO)
based on the latest info received from HW team as a part of BW issues debug.

SMMU Client config register are obsolete from T186. Clean up the unnecessary
register definitions and programming of these registers.
Cleanup unnecessary macros as well.

Change-Id: I0d28ae8842a33ed534f6a15bfca3c9926b3d46b2
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>

This patch memmaps all the IRAM memory banks during boot. The BPMP
firmware might place the channels in any of the IRAMs, so it is better
to map all the banks to avoid surprises.

Change-Id: Ia009a65d227ee50fbb23e511ce509daf41b877ee
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the logic to check if Atomics hardware block is powered
on during boot

Reported by: Peter De Schrijver <pdeschrijver@nvidia.com>

Change-Id: I4a6521bcee37225d1402321151c48fa631776b8a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the macros to include the newly added IRAM
memory apertures.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I931daa310d738e8bf966f14e11d0631920e9bdde

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Force operands of an operator to the same type category [Rule 10.4]

Added curly braces ({}) around if statements in order to
make them compound [Rule 15.6]

Change-Id: I4840c3122939f736113d61f1462af3bd7b0b5085
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

convert object type to match the type of function parameters
[Rule 10.3]

Force operands of an operator to the same type category [Rule 10.4]

Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: I5840a07f37beefc3326ac56d0b4a4701602bd8a8
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch removes unwanted error prints from the MCE command
handler, to reduce the code complexity for this function.

Tested with 'pmccabe'

Change-Id: I375d289db1df9e119eeb1830210974457c8905a4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes support for the SC8 power state as the feature is no
longer required for Tegra186 projects.

Change-Id: I622a5ddcffe025b9b798801d09bbb856853befd7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

* Expressions resulting from the expansion of macro parameters
  shall be enclosed in parentheses [Rule 20.7]
* Added explicit casts (e.g. 0U) to integers in order for them
  to be compatible with whatever operation they're used in [Rule
  10.1]
* Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: Ia83c3ab6e4c8c03c19c950978a7936ebfc290590
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Force operands of an operator to the same type category [Rule 10.4]

Voided non c-library functions whose return types are not used [Rule 17.7]

Change-Id: I758e7ef6d45dd2edf4cd5580e2af15219246e75c
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

* EKS blob size was not passed by as a boot parameter
  earlier. Its being passed now
* If EKS value sent by bootloader is non-zero
  update the boot parameter from default value to the argument
  passed by bootloader

Change-Id: I65a3091bd2c1c908cc9e81c0aab6489cab02c098
Signed-off-by: Akshay Sharan <asharan@nvidia.com>

DRBG must be initialized to guarantee SRK has a random
value during suspend. This patch add a sequence to generate
an SRK on boot and during resume for SE1 and SE2. This SRK
value is not saved to PMC scratch, and should be overwitten
during atomic suspend.

Change-Id: Id5e2dc74a1b462dd6addaec1709fec46083a6e1c
Signed-off-by: Sam Payne <spayne@nvidia.com>

This patch adds the driver to communicate with the BPMP processor
for power management use cases. BPMP controls the entry into cluster
and system power states. The Tegra210 platform port queries the BPMP
to calculate the target state for the cluster. In case BPMP does not
allow CCx entry, the core enters a power down state.

Change-Id: I9c40aef561607a0b02c49b7f8118570eb9105cc9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes MISRA defects for the MCE driver.

* Using logical NOT for bool type function
* Using MPIDR_AFFLVL_MASK << MPIDR_AFFINITY_BITS replace
  MPIDR_CLUSTER_MASK

Change-Id: I97e96f172a3c1158646a15a184c273c53a103d63
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch uses int32_t to replace ints, to fix Rule 4.6 of the
MISRA standard.

Change-Id: I20ac6185929eced684b43da3ef1f8cd5fbddc83d
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds (void) for unused function parameters to
fix Rule 2.7 of the MISRA standard.

Change-Id: Ibc3f10b3bfe73363383b4c28413ab8d99fbc8c89
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the implementation of the SE atomic context save
sequence. The atomic context-save consistently saves to the TZRAM
carveout; thus there is no need to declare context save buffer or
map MMU region in TZRAM for context save. The atomic context-save
routine is responsible to validate the context-save progress
counter, where CTX_SAVE_CNT=133(SE1)/646(SE2), and the SE error
status to ensure the context save procedure complete successfully.

Change-Id: Ic80843902af70e76415530266cb158f668976c42
Signed-off-by: Marvin Hsu <marvinh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

* Expressions resulting from the expansion of macro parameters
  shall be enclosed in parentheses [Rule 20.7]
* Added explicit casts (e.g. 0U) to integers in order for them
  to be compatible with whatever operation they're used in [Rule
  10.1]
* Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: Ia83c3ab6e4c8c03c19c950978a7936ebfc290590
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds capability to read the boot flag to enable L2 ECC
and Parity Protection bit for the Cortex-A57 CPUs. The previous
bootloader sets this flag value for the platform.

* with some coverity fix:
MISRA C-2012 Directive 4.6
MISRA C-2012 Rule 2.5
MISRA C-2012 Rule 10.3
MISRA C-2012 Rule 10.4

Change-Id: Id7303bbbdc290b52919356c31625847b8904b073
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch sets up the clock for the UART console, for real Silicon
and FPGA platforms. FPGA platforms run the UART clock source at
13MHz, whereas the clock cource runs at 408MHz for real silicon.

Change-Id: Ibfd99df032ec473f29e636e597cfc95a0f580598
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds helper functions to find out the chip ID of the
Tegra SoC.

Change-Id: Ia3901dc7cdf77d8c23884d1ed38a80dba6a8afde
Signed-off-by: Marvin Hsu <marvinh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The platform code generates the power domain tree. The handler to
retrieve the tree should also reside in the platform code.

This patch moves the plat_get_power_domain_tree_desc() to the
individual platforms.

Change-Id: Iaafc83ed381d83129501111ef655e3c58a8a553f
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for simulation platforms as well as
fixes issues flagged by the MISRA scans.

Main MISRA fixes:

* Added explicit casts (e.g. 0U) to integers in order for them to be
  compatible with whatever operation they're used in [Rule 10.1]
* Fix return type doesn't match the function type [Rule 10.3]
* Use single return point instead of multiple [Rule 15.5]
* Change return type for the tegra_platform_is_x handlers to bool

Change-Id: I871b7c37b22942f6c0c2049c14cc626d4a24d81c
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that the secure partition payload
that is loaded into this region by the SCP firmware is dispatched
appropriately.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32_BASE is set for other reasons (i.e., when enabling
SPM)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Corrects typos in core code, documentation files, drivers, Arm
platforms and services.

None of the corrections affect code; changes are limited to comments
and other documentation.

Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

From now on, platform_def.h must include any header with definitions that
are platform-specific (like arm_def.h) and the included headers mustn't
include back platform_def.h, and shouldn't be used by other files. Only
platform_def.h should be included in other files. This will ensure that all
needed definitions are present, rather than needing to include all the
headers in all the definitions' headers just in case.

This also prevents problems like cyclic dependencies.

Change-Id: I9d3cf4d1de4b956fa035c79545222697acdaf5ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The definitions in bl1/bl1_private.h and bl2/bl2_private.h are useful for
platforms that may need to access them.

Change-Id: Ifd1880f855ddafcb3bfcaf1ed4a4e0f121eda174
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

With DEBUG_CONSOLE enabled, build will fail for imx8mq platform:

./build/imx8mq/release/bl31/imx8mq_bl31_setup.o:
In function `bl31_early_platform_setup2':
imx8mq_bl31_setup.c:(.text.bl31_early_platform_setup2+0x40):
	undefined reference to `console_uart_register'
Makefile:741: recipe for target 'build/imx8mq/release/bl31/bl31.elf' failed
make: *** [build/imx8mq/release/bl31/bl31.elf] Error 1

Besides, the .console_flush callback needs to be added to avoid
panic when debug mode is enabled, since the console_flush() will
call it without checking whether the function callback is valid.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Current lpuart driver does NOT implement .console_flush callback,
if debug console is enabled, the console_flush() will call the
undefined .console_flush callback(NULL) for lpuart and leak to
panic, this patch adds .console_flush callback to make lpuart work
for debug mode.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Change-Id: I7194a9a5f0e41308eb3242d20c0d3434f72da591
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

It is cleaner to use the same number of tables regardless of whether
OP-TEE is used or not. This doesn't result in a significant memory
usage increase.

Change-Id: I38bcaa3f2f197c0a352153117592749f189a265c
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>