GitLab

A Neoverse reference design platform can have two or more variants that
differ in core count, cluster count or other peripherals. To allow reuse
of platform code across all the variants of a platform, introduce build
option CSS_SGI_PLATFORM_VARIANT for Arm Neoverse reference design
platforms. The range of allowed values for the build option is platform
specific. The recommended range is an interval of non negative integers.

An example usage of the build option is
make PLAT=rdn2 CSS_SGI_PLATFORM_VARIANT=1

Change-Id: Iaae79c0b4d0dc700521bf6e9b4979339eafe0359
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

This will help in keeping source file generic and conditional
compilation can be contained in platform provided dt files.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I3c6e0a429073f0afb412b9ba521ce43f880b57fe

sgm775 is an old platform and is no longer maintained by Arm and its
fast model FVP_CSS_SGM-775 is no longer available for download.
This platform is now superseded by Total Compute(tc) platforms.

This platform is now deprecated but the source will be kept for cooling
off period of 2 release cycle before removing it completely.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I8fe1fc3da0c508dba62ed4fc60cbc1642e0f7f2a

ELP processors can sometimes have different MIDR values or features so
we are adding the "_arm" suffix to differentiate the reference
implementation from other future versions.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ieea444288587c7c18a397d279ee4b22b7ad79e20

To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been added that is included in the FIP and a Juno specific BL31
setup has been added to populate fconf with the hw_config.

Juno's BL2 setup has been updated to align it with the new behavior
implemented in the Arm FVP platform, where fw_config is passed in arg1
to BL31 instead of soc_fw_config. The BL31 setup is expected to use the
fw_config passed in arg1 to find the hw_config.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6

Remove an incorrect tabulation in front of an $(error) function call
outside of a recipe, which caused the following text to be displayed:

  plat/arm/board/common/board_common.mk:36: *** recipe commences before first target.  Stop.

instead of:

  plat/arm/board/common/board_common.mk:36: *** "Unsupported ARM_ROTPK_LOCATION value".  Stop.

Change-Id: I8592948e7de8ab0c4abbc56eb65a53eb1875a83c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

The number of ITS have changed from 4 to 1, resulting
in GICR base address change.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I28101f0d1faf9f3c58591b642033c3fd49a275e7

NT_FW_CONFIG file is meant to be passed from BL31 to be consumed by
BL33, fvp platforms use this to pass measured boot configuration and
the x0 register is used to pass the base address of it.

In case of hafnium used as hypervisor in normal world, hypervisor
manifest is expected to be passed from BL31 and its base address is
passed in x0 register.

As only one of NT_FW_CONFIG or hypervisor manifest base address can be
passed in x0 register and also measured boot is not required for SPM so
disable passing NT_FW_CONFIG.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ifad9d3658f55ba7d70f468a88997d5272339e53e

Add basic support for Cortex_A78C CPU.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Id9e41cbe0580a68c6412d194a5ee67940e8dae56

A TZC400 controller is placed inline on DRAM channels and regulates
the secure and non-secure accesses to both secure and non-secure
regions of the DRAM memory. Configure each of the TZC controllers
across the Chips.

For use by secure software, configure the first chip's trustzone
controller to protect the upper 16MB of the memory of the first DRAM
block for secure accesses only. The other regions are configured for
non-secure read write access. For all the remote chips, all the DRAM
regions are allowed for non-secure read and write access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I809f27eccadfc23ea0ef64e2fd87f95eb8f195c1

Define a default DMC-620 TZC memory region configuration and use it to
specify the TZC memory regions on sgi575, rdn1edge and rde1edge
platforms. The default DMC-620 TZC memory regions are defined
considering the support for secure paritition as well.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Iedee3e57d0d3de5b65321444da51ec990d3702db

The macros specific to SDEI defined in the sgi_base_platform_def.h are
not applicable for all the platforms supported by plat/sgi. So refactor
the SDEI specific macros into a new header file and include this file on
only on platforms it is applicable on.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cb7125334f02a21cae1837cdfd765c16ab50bf5

Add basic support for Makalu ELP processor core.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7b1ddbb8dd43326ecb8ff188f6f8fcf239826a93

The FF-A v1.0 spec allows two configurations for the number of EC/vCPU
instantiated in a Secure Partition:
-A MultiProcessor (MP) SP instantiates as many ECs as the number of PEs.
An EC is pinned to a corresponding physical CPU.
-An UniProcessor (UP) SP instantiates a single EC. The EC is migrated to
the physical CPU from which the FF-A call is originating.
This change permits exercising the latter case within the TF-A-tests
framework.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7fae0e7b873f349b34e57de5cea496210123aea0

Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: Ie199c60553477c43d1665548ae78cdfd1aa7ffcf

Add basic support for Makalu CPU.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I4e85d425eedea499adf585eb8ab548931185043d

Now that we have a framework for the SMCCC TRNG interface, and the
existing Juno entropy code has been prepared, add the few remaining bits
to implement this interface for the Juno Trusted Entropy Source.

We retire the existing Juno specific RNG interface, and use the generic
one for the stack canary generation.

Change-Id: Ib6a6e5568cb8e0059d71740e2d18d6817b07127d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The Juno Trusted Entropy Source has a bias, which makes the generated
raw numbers fail a FIPS 140-2 statistic test.

To improve the quality of the numbers, we can use the CPU's CRC
instructions, which do a decent job on conditioning the bits.

This adds a *very* simple version of arm_acle.h, which is typically
provided by the compiler, and contains the CRC instrinsics definitions
we need. We need the original version by using -nostdinc.

Change-Id: I83d3e6902d6a1164aacd5060ac13a38f0057bd1a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Currently we use the Juno's TRNG hardware entropy source to initialise
the stack canary. The current function allows to fill a buffer of any
size, but we will actually only ever request 16 bytes, as this is what
the hardware implements. Out of this, we only need at most 64 bits for
the canary.

In preparation for the introduction of the SMCCC TRNG interface, we
can simplify this Juno specific interface by making it compatible with
the generic one: We just deliver 64 bits of entropy on each call.
This reduces the complexity of the code. As the raw entropy register
readouts seem to be biased, it makes sense to do some conditioning
inside the juno_getentropy() function already.
Also initialise the TRNG hardware, if not already done.

Change-Id: I11b977ddc5417d52ac38709a9a7b61499eee481f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Update TZC base address to align with the recent changes in the platform
memory map.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I0d0ad528a2e236607c744979e1ddc5c6d426687a

Currently, BLs are mapping the GIC memory region as read-write
for all cores on boot-up.

This opens up the security hole where the active core can write
the GICR frame of fused/inactive core. To avoid this issue, disable
the GICR frame of all inactive cores as below:

1. After primary CPU boots up, map GICR region of all cores as
   read-only.
2. After primary CPU boots up, map its GICR region as read-write
   and initialize its redistributor interface.
3. After secondary CPU boots up, map its GICR region as read-write
   and initialize its redistributor interface.
4. All unused/fused core's redistributor regions remain read-only and
   write attempt to such protected regions results in an exception.

As mentioned above, this patch offers only the GICR memory-mapped
region protection considering there is no facility at the GIC IP
level to avoid writing the redistributor area.

These changes are currently done in BL31 of Arm FVP and guarded under
the flag 'FVP_GICR_REGION_PROTECTION'.

As of now, this patch is tested manually as below:
1. Disable the FVP cores (core 1, 2, 3) with core 0 as an active core.
2. Verify data abort triggered by manually updating the ‘GICR_CTLR’
   register of core 1’s(fused) redistributor from core 0(active).

Change-Id: I86c99c7b41bae137b2011cf2ac17fad0a26e776d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

GIC memory region is not getting used in BL1 and BL2.
Hence avoid its mapping in BL1 and BL2 that freed some
page table entries to map other memory regions in the
future.

Retains mapping of CCN interconnect region in BL1 and BL2
overlapped with the GIC memory region.

Change-Id: I880dd0690f94b140e59e4ff0c0d436961b9cb0a7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

The structure has been modified to specify the memory
size in bytes instead of Gigabytes.
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I3384677d79af4f3cf55d3c353b6c20bb827b5ae7

This patch removes the Neoverse N1 CPU errata workaround for
bug 1542419 as the bug is not present in Rainier R0P0 core.

Change-Id: Icaca299b13ef830b2ee5129576aae655a6288e69
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>

Increase the core count and add respective entries in DTS.
Add Klein assembly file to cpu sources for core initialization.
Add SCMI entries for cores.
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>
Change-Id: I14dc1d87df6dcc8d560ade833ce1f92507054747

When building TF-A with USE_ROMLIB=1 and -j make options, the build fails with the following error:
make[1]: *** No rule to make target '/build/juno/debug/romlib/romlib.bin', needed by 'bl1_romlib.bin'.
This patch fixes that issue.
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
Change-Id: I0cca416f3f50f400759164e0735c2d6b520ebf84

AMU counters are used for monitoring the CPU performance. RD-N2 platform
has architected AMU available for each core. Enable the use of AMU by
non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).

Change-Id: I5cc749cf63c18fc5c7563dd754c2f42990a97e23
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>

AMU counters are used for monitoring the CPU performance. RD-V1 platform
has architected AMU available for each core. Enable the use of AMU by
non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).

Change-Id: I4003d21407953f65b3ce99eaa8f496d6052546e0
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>

Reference Design platform RD-Daniel-ConfigXLR has been renamed to
RD-V1-MC. Correspondingly, remove all uses of 'rddanielxlr' and replace
it with 'rdv1mc' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I5d91c69738397b19ced43949b4080c74678e604c

Reference Design platform RD-Daniel has been renamed to RD-V1.
Correspondingly, remove all uses of 'rddaniel' and replace it with
'rdv1' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I1702bab39c501f8c0a09df131cb2394d54c83bcf

Only non-file targets should be set a .PHONY. Otherwise if file target is
set as .PHONY then targets which depends on those file .PHONY targets would
be always rebuilt even when their prerequisites are not changed.

File target which needs to be always rebuilt can be specified in Make
system via having a prerequisite on some .PHONY target, instead of marking
whole target as .PHONY. In Makefile projects it is common to create empty
.PHONY target named FORCE for this purpose.

This patch changes all file targets which are set as .PHONY to depends on
new .PHONY target FORCE, to ensure that these file targets are always
rebuilt (as before). Basically they are those targets which calls external
make subprocess.

After FORCE target is specified in main Makefile, remove it from other
Makefile files to prevent duplicate definitions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iee3b4e0de93879b95eb29a1745a041538412e69e

RD-N2 platform has been updated to use six GIC ITS blocks. This results
in change in base address of the GIC Redistributor to accomodate two
new GIC ITS blocks. Update the base address of GICR to reflect the same.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I740a547328fb9a9f25d7a09c08e61bdbc8bf781c

This patch adds support to enable OP-TEE as S-EL1 SP with SPMC at S-EL2
     - create SPMC manifest file with OP-TEE as SP
     - add support for ARM_SPMC_MANIFEST_DTS build option
     - add optee entry with ffa as method in tc0.dts
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ia9b5c22c6f605d3886914bbac8ac45e8365671cb

Enable SPD=opteed support for tc0 platform.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ieb038d645c68fbe6b5a211c7279569e21b476fc3

Add the initial board support for RD-N2 platform.

Change-Id: I8325885bf248dd92191d6fc92a2da91c23118f8c
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Upcoming RD platforms have deviations in various definitions of
platform macros from that of the exisiting platforms. In preparation
for adding support for those upcoming RD platforms, refactor the
header file inclusion to allow newer platforms to use a different
set of platform macros.

Change-Id: Ic80283ddadafaa7f766f300652cb0d4e507efdb6
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Upcoming RD platforms have a different memory map from those of the
existing platforms. So make the build of the existing mmap entries to be
usable only for existing platforms and let upcoming platforms define
a different set of mmap entries.

Change-Id: Id1ef0293efe8749c78a99237e78d32573c7233aa
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

The primary VM concept is removed from the SPMC.
Update the SPMC manifests with number of Execution Contexts
and SP workspace size for the first Secure Partition (as it
is done for NWd secondary VMs and other SPs).
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I3b9c52666f7dfe74ab1f7d2148ad0070ee44b54e

The chosen node is no longer required as the SPMC implements
a specific boot flow which no longer requires this node.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ib566b602a7f83003a1b2d0ba5f6ebf4d8b7a9156

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I0981c43e2ef8172138f65d95eac7b20f8969394e