GitLab

* changes:
  plat: xilinx: Move pm_client.h to common directory
  plat: xilinx: versal: Make silicon default build target
  xilinx: versal: Wire silicon default setup
  versal: Increase OCM memory size for DEBUG builds
  plat: xilinx: versal: Dont set IOU switch clock
  arm64: versal: Adjust cpu clock for versal virtual
  xilinx: versal: Add support for PM_GET_OPERATING_CHARACTERISTIC EEMI call
  plat: versal: Add Get_ChipID API
  plat: xilinx: versal: Add load Pdi API support
  xilinx: versal: Add feature check API
  xilinx: versal: Implement set wakeup source for client
  plat: xilinx: versal: Add GET_CALLBACK_DATA function
  xilinx: versal: Add PSCI APIs for system shutdown & reset
  xilinx: versal: Add PSCI APIs for suspend/resume
  xilinx: versal: Remove no_pmc ops to ON power domain
  xilinx: versal: Add set wakeup source API
  xilinx: versal: Add client wakeup API
  xilinx: versal: Add query data API
  xilinx: versal: Add request wakeup API
  xilinx: versal: Add PM_INIT_FINALIZE API for versal
  xilinx: versal: Add support of PM_GET_TRUSTZONE_VERSION API
  xilinx: versal: enable ipi mailbox service
  xilinx: move ipi mailbox svc to xilinx common
  plat: xilinx: versal: Implement PM IOCTL API
  xilinx: versal: Implement power down/restart related EEMI API
  xilinx: versal: Add SMC handler for EEMI API
  xilinx: versal: Implement PLL related PM APIs
  xilinx: versal: Implement clock related PM APIs
  xilinx: versal: Implement pin control related PM APIs
  xilinx: versal: Implement reset related PM APIs
  xilinx: versal: Implement device related PM APIs
  xilinx: versal: Add support for suspend related APIs
  xilinx: versal: Add get_api_version support
  xilinx: Add support to send PM API to PMC using IPI for versal
  plat: xilinx: versal: Move versal_def.h to include directory
  plat: xilinx: versal: Move versal_private.h to include directory
  plat: xilinx: zynqmp: Use GIC framework for warm restart

Moving the FDT helper functions to the common/ directory exposed the file
to MISRA checking, which is mandatory for common code.

Fix the complaints that the test suite reported.

Change-Id: Ica8c8a95218bba5a3fd92a55407de24df58e8476
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

* changes:
  plat: imx: Correct the SGIs that used for secure interrupt
  plat: imx8mm: Add the support for opteed spd on imx8mq/imx8mm

* changes:
  Tegra194: platform handler for entering CPU standby state
  Tegra194: memctrl: force viw and vifalr/w transactions as non-coherent
  Tegra194: memctrl: fix bug in client order id reg value generation
  Tegra194: memctrl: enable mc coalescer
  Tegra194: update scratch registers used to read boot parameters
  Tegra194: implement system shutdown/reset handlers
  Tegra194: mce: support for shutdown and reboot
  Tegra194: request CG7 before checking if SC7 is allowed
  Tegra194: config to enable/disable strict checking mode
  Tegra194: remove unused platform configs
  Tegra194: restore XUSB stream IDs on System Resume

Remove the general BL31 mmap region: it duplicates the existing static
mapping for the entire SRAM region. Use the helper definitions when
applicable to simplify the code and add the MT_EXECUTE_NEVER flag.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I7a6b79e50e4b5c698774229530dd3d2a89e94a6d

* changes:
  doc: stm32mp1: Update build command line
  fdts: stm32mp1: remove second QSPI flash instance
  stm32mp1: Add support for SPI-NOR boot device
  stm32mp1: Add support for SPI-NAND boot device
  spi: stm32_qspi: Add QSPI support
  fdts: stm32mp1: update for FMC2 pin muxing
  stm32mp1: Add support for raw NAND boot device
  fmc: stm32_fmc2_nand: Add FMC2 driver support
  stm32mp1: Reduce MAX_XLAT_TABLES to 4
  io: stm32image: fix device_size type
  stm32mp: add DT helper for reg by name
  stm32mp1: add compilation flags for boot devices
  lib: utils_def: add CLAMP macro
  compiler_rt: Import popcountdi2.c and popcountsi2.c files
  Add SPI-NOR framework
  Add SPI-NAND framework
  Add SPI-MEM framework
  Add raw NAND framework

Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed

Remove second flash node as only one must be used
by QSPI NOR driver.

Change-Id: I48189f2fdf4e0455aabe7d4cd9b2f3d36bb9cfb5
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

STM32MP1 platform is able to boot from SPI-NOR devices.
These modifications add this support using the new
SPI-NOR framework.

Change-Id: I75ff9eba4661f9fb87ce24ced2bacbf8558ebe44
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.

Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Add QSPI support (limited to read interface).
Implements the memory map and indirect modes.
Low level driver based on SPI-MEM operations.

Change-Id: Ied698e6de3c17d977f8b497c81f2e4a0a27c0961
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

Include the required FMC2 pinmux definition for the
NAND management.

Change-Id: I80333deacdf3444b2f21f17f2fb5919e569a3591
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

STM32MP1 platform is able to boot from raw NAND devices.
These modifications add this support using the new
raw NAND framework.

Change-Id: I9e9c2b03930f98a5ac23f2b6b41945bef43e5043
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Add fmc2_nand driver support. The driver implements
only read interface for NAND devices.

Change-Id: I3cd037e8ff645ce0d217092b96f33ef41cb7a522
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

For STM32MP1, the address space is 4GB, which can be first divided
in 4 parts of 1GB. This LVL1 table is already mapped regardless
of MAX_XLAT_TABLES.
Fixing typo: Replace Ko to KB.

BL2/sp_min for platform STM32MP1 requires 4 MMU translation tables:
  - a level2 table and a level3 table for identity mapped SYSRAM
  - a level2 table mapping 2MB of BootROM runtime resources
  - a level2 table mapping 2MB of secure DDR (case BL32 is OP-TEE)

Change-Id: If80cbd4fccc7689b39dd540d6649b1313557f326
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Device size could be more than 4GB, we must
define size as unsigned long long.

Change-Id: I52055cf5c1c15ff18ab9e157aa9b73c8b4fb7b63
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Add a new entry to find register properties by name and
include new assert functions to limit address cells to 1
and size cells to 1.

Change-Id: Ide59a795a05fb2af36bd07fec15e5a3adf196226
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Adds compilation flags to specify which drivers will be
embedded in the generated firmware.

Change-Id: Ie9decc89c3f26cf17e7148a3a4cf337fd35940f7
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Add the standard CLAMP macro.  It ensures that
x is between the limits set by low and high.
If low is greater than high the result is undefined.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ia173bb9ca51bc8d9a8ec573bbc15636a94f881f4

Imported from the LLVM compiler_rt library on master branch as of
30 Oct 2018 (SVN revision: r345645).

This is to get the __popcountsi2(si_int a) and __popcountdi2(di_int a)
builtin which are required by a driver that uses a __builtin_popcount().

Change-Id: I8e0d97cebdd90d224690c8ce1b02e657acdddb25
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

SPI-NOR framework is based on SPI-MEM framework using
spi_mem_op execution interface.

It implements read functions and allows NOR configuration
up to quad mode.
Default management is 1 data line but it can be overridden
by platform.
It also includes specific quad mode configuration for
Spansion, Micron and Macronix memories.

Change-Id: If49502b899b4a75f6ebc3190f6bde1013651197f
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

This framework supports SPI-NAND and is based on the
SPI-MEM framework for SPI operations. It uses a common high
level access using the io_mtd.

It is limited to the read functionalities.

Default behavior is the basic one data line operation
but it could be overridden by platform.

Change-Id: Icb4e0887c4003a826f47c876479dd004a323a32b
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

This framework supports SPI operations using a common
spi_mem_op structure:
 - command
 - addr
 - dummy
 - data

The framework manages SPI bus configuration:
 - speed
 - bus width (Up to quad mode)
 - chip select

Change-Id: Idc2736c59bfc5ac6e55429eba5d385275ea3fbde
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

The raw NAND framework supports SLC NAND devices.

It introduces a new high level interface (io_mtd) that
defines operations a driver can register to the NAND framework.
This interface will fill in the io_mtd device specification:
	- device_size
        - erase_size
that could be used by the io_storage interface.

NAND core source file integrates the standard read loop that
performs NAND device read operations using a skip bad block strategy.
A platform buffer must be defined in case of unaligned
data. This buffer must fit to the maximum device page size
defined by PLATFORM_MTD_MAX_PAGE_SIZE.

The raw_nand.c source file embeds the specific NAND operations
to read data.
The read command is a raw page read without any ECC correction.
This can be overridden by a low level driver.
No generic support for write or erase command or software
ECC correction.

NAND ONFI detection is available and can be enabled using
NAND_ONFI_DETECT=1.
For non-ONFI NAND management, platform can define required
information.

Change-Id: Id80e9864456cf47f02b74938cf25d99261da8e82
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

* changes:
  io: change seek offset to signed long long
  compiler_rt: Import aeabi_ldivmode.S file and dependencies

* changes:
  zynqmp: pm: clock: Move custom flags to typeflags
  zynqmp: pm: clock: Add support for custom type flags
  plat: xilinx: zynqmp: Add GET_CALLBACK_DATA function
  zynqmp: pm: Remove CLK_TOPSW_LSBUS from invalid clock list

The LLVM linker replaces the GNU linker as default for the link on Clang
builds. It is possible to override the default linker by setting the LD build
flag.

The patch also updates the TF-A doc.

Change-Id: Ic08552b9994d4fa8f0d4863e67a2726c1dce2e35
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I2a7f38eaae3a78fc3caa37833af755c15e8236ce

This patch implements a handler to enter the standby state on
Tegra194 platforms. On receiving a CPU_STANDBY state request,
the platform handler issues TEGRA_NVG_CORE_C6 request to the
MCE firmware to take the CPU into the standby state.

Change-Id: I703a96ec12205853ddb3c3871b23e338e1f60687
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Force memory transactions from viw and viflar/w as non-coherent from
no-override. This is necessary as iso clients shouldn't use coherent
path and stage-2 smmu mappings won't mark transactions as non-coherent.
For native case, no-override works. But, not for virtualization case.

Change-Id: I1a8fc17787c8d0f8579bdaeeb719084993e27276
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>