GitLab

The rpi4 has a single nonstandard ECAM. It is broken
into two pieces, the root port registers, and a window
to a single device's config space which can be moved
between devices. Now that we have widened the page
tables/MMIO window, we can create a read/write acces
functions that are called by the SMCCC/PCI API.

As an example platform, the rpi4 single device ECAM
region quirk is pretty straightforward. The assumption
here is that a lower level (uefi) has configured and
initialized the PCI root to match the values we are
using here.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: Ie1ffa8fe9aa1d3c62e6aa84746a949c1009162e0

The function read_uuid() zeroes the UUID destination buffer
on error. However, it mistakenly uses the dest pointer
that has been incremented many times during the parsing,
leading to an out-of-bounds write.

To fix this, retain a pointer to the start of the buffer,
and use this when clearing it instead.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: Iee8857be5d3f383ca2eab86cde99a43bf606f306

* changes:
  refactor(plat/allwinner): clean up platform definitions
  refactor(plat/allwinner): do not map BL32 DRAM at EL3
  refactor(plat/allwinner): map SRAM as device memory by default
  refactor(plat/allwinner): rename static mmap region constant
  feat(bl_common): import BL_NOBITS_{BASE,END} when defined

* changes:
  fix(plat/tc0): enable AMU extension
  fix(el3_runtime): fix SVE and AMU extension enablement flags

Add myself as i.MX8 maintainer.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ib037c24a75d42febd79f2eb1ab3b985356dbfb58

* changes:
  feat: disabling non volatile counters in diphda
  feat: adding the diphda platform

The SDEI specification now says that during an SDEI
event handler dispatch the SPSR should be set according
to the TakeException() pseudocode function defined in
the Arm Architecture Reference Manual. This patch sets
the SPSR according to the function given in
ARM DDI 0487F.c page J1-7635

Change-Id: Id2f8f2464fd69c701d81626162827e5c4449b658
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

Recent changes to enable SVE for the secure world have disabled AMU
extension by default in the reset value of CPTR_EL3 register. So the
platform has to enable this extension explicitly.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I7d930d96ec22d7c3db961411370564bece0ce272

If SVE are enabled for both Non-secure and Secure world along with AMU
extension, then it causes the TAM_BIT in CPTR_EL3 to be set upon exit
from bl31. This restricts access to the AMU register set in normal
world. This fix maintains consistency in both TAM_BIT and CPTR_EZ_BIT
by saving and restoring CPTR_EL3 register from EL3 context.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Id76ce1d27ee48bed65eb32392036377716aff087

A RAS error may be triggered while offline core in OS. Error:
Uncorrected software error in the Distributor, with IERR=9,SERR=f.
Core put to sleep before its Group enables were cleared.

gicv3_cpuif_disable() will be called in offline core flow.
According to GIC architecture version 3 and version 4:
Architectural execution of a DSB instruction guarantees that
the last value written to ICC_IGRPEN0_EL1, ICC_IGRPEN1_EL1,
ICC_IGRPEN1_EL3 or GICC_CTLR.{EnableGrp0, EnableGrp1}is observed
by the associated Redistributor.
An ISB or other context synchronization operation must precede
the DSB to ensure visibility of System register writes.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: Iff1475657f401374c761b5e8f2f5b3a4b2040e9d

Group the SCP base/size definitions in a more logical location.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id43f9b468d7d855a2413173d674a5ee666527808

BL31 does not appear to ever access the DRAM allocated to BL32,
so there is no need to map it at EL3.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ie8727b793e53ea14517894942266f6da0333eb74

The SRAM on Allwinner platforms is shared between BL31 and coprocessor
firmware. Previously, SRAM was mapped as normal memory by default.
This scheme requires carveouts and cache maintenance code for proper
synchronization with the coprocessor.

A better scheme is to only map pages owned by BL31 as normal memory,
and leave everything else as device memory. This removes the need for
cache maintenance, and it makes the mapping for BL31 RW data explicit
instead of magic.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I820ddeba2dfa2396361c2322308c0db51b55c348

This constant specifically refers to the number of static mmap regions.
Rename it to make that clear.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I475c037777ce2a10db2631ec0e7446bb73590a36

If SEPARATE_NOBITS_REGION is enabled, the platform may need to map
memory specifically for that region. Import the symbols from the linker
script to allow the platform to do so.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Iaec4dee94a6735b22f58f7b61f18d53e7bc6ca8d

At this stage of development Non Volatile counters are not implemented
in the Diphda platform.

This commit disables their use during the Trusted Board Boot by
overriding the NV counters get/set functions.

Change-Id: I8dcbebe0281cc4d0837c283ff637e20b850988ef
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>

This commit enables trusted-firmware-a with Trusted Board Boot support
for the Diphda 64-bit platform.

Diphda uses a FIP image located in the flash. The FIP contains the
following components:

- BL2
- BL31
- BL32
- BL32 SPMC manifest
- BL33
- The TBB certificates

The board boot relies on CoT (chain of trust). The trusted-firmware-a
BL2 is extracted from the FIP and verified by the Secure Enclave
processor. BL2 verification relies on the signature area at the
beginning of the BL2 image. This area is needed by the SecureEnclave
bootloader.

Then, the application processor is released from reset and starts by
executing BL2.

BL2 performs the actions described in the trusted-firmware-a TBB design
document.
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Change-Id: Iddb1cb9c2a0324a9635e23821c210ac81dfc305d

* changes:
  fix(drivers/scmi-msg): entry: add weak functions
  feat(drivers/scmi-msg): add power domain protocol
  fix(drivers/scmi-msg): smt: fix build for aarch64

One platform may not implement all the protocols, to avoid build break
when we not include all the protocols, add weak functions.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I1485baa2e8f381cb0eede1a7b93ed10e49934971

Add SCMI power domain protocol, with POWER_STATE_NOTIFY and
POWER_STATE_CHANGE_REQUESTED_NOTIFY not implemented.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ia7c4db57c4c702667f8eaa630c924016e4a8bde0

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Change-Id: I6dbf6d4ea6310c3371ca15d1e7cce249a05af2fb

* changes:
  refactor(plat/arm): use mmio* functions to read/write NVFLAGS registers
  refactor(plat/arm): mark the flash region as read-only
  refactor(plat/arm): update NV flags on image load/authentication failure

* changes:
  fix(plat/marvell/a3k): Fix building uart-images.tgz.bin archive
  refactor(plat/marvell/a3k): Rename *_CFG and *_SIG variables
  refactor(plat/marvell/a3k): Rename DOIMAGETOOL to TBB
  refactor(plat/marvell/a3k): Remove useless DOIMAGEPATH variable
  fix(plat/marvell/a3k): Fix check for external dependences
  fix(plat/marvell/a8k): Add missing build dependency for BLE target
  fix(plat/marvell/a8k): Correctly set include directories for individual targets
  fix(plat/marvell/a8k): Require that MV_DDR_PATH is correctly set

There is a error setting for SPM, so we need to fix this issue.
Signed-off-by: Garmin Chang <garmin.chang@mediatek.com>
Change-Id: I741a5dc1505a831fe48fd5bc3da9904db14c8a57

Neoverse V1 erratum 1940577 is a Cat B erratum, present in some
revisions of the V1 processor core.  The workaround is to insert a
DMB ST before acquire atomic instructions without release semantics.
This issue is present in revisions r0p0 - r1p1  but this workaround
only applies to revisions r1p0 - r1p1, there is no workaround for older
versions.

SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I210ad7d8f31c81b6ac51b028dfbce75a725c11aa

This change adds 208 bytes to PMUSRAM, pushing the end of text from
0xff3b0de0 to 0xff3b0eb0, which is still shy of the maximum
0xff3b1000.

Further, this skips enabling the watchdog when it's not being used
elsewhere, as you can't turn the watchdog off.

Change-Id: I2e6fa3c7e01f2be6b32ce04ce479edf64e278554
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

* changes:
  refactor(plat/nxp/lx216x): refine variable definition
  refactor(plat/nxp/lx216x): use common make variables

* changes:
  docs: add mt6795 to deprecated list
  feat(plat/mediatek/mt8195): add DCM driver