GitLab

Instead of having a custom implementation of setjmp() and longjmp() it
is better to follow the C standard.

The comments in setjmp.h are no longer needed as there are no deviations
from the expected one, so they have been removed.

All SDEI code that relied on them has been fixed to use the new function
prototypes and structs.

Change-Id: I6cd2e21cb5a5bcf81ba12283f2e4c067bd5172ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Tf2.0 tegra downstream rebase 1.25.19

drivers: generic_delay_timer: Assert presence of Generic Timer

The Generic Timer is an optional extension to an ARMv7-A implementation.
The generic delay timer can be used from any architecture supported by
the Trusted Firmware. In ARMv7 it is needed to check that this feature
is present. In ARMv8 it is always present.

Change-Id: Ib7e8ec13ffbb2f64445d4ee48ed00f26e34b79b7
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch adds information about the Tegra186 platforms to the
docs.

Change-Id: I69525c60a0126030dc15505ec7f02ccf8250be6f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes this macro and its usage as it is used only
within the Tegra186 files and all derived platforms keep the
macro enabled.

Change-Id: Ib831b3c002ba4dedc3d5fafbb7d321daa28fa9ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch dynamically maps the first page of trusty's code memory,
before accessing it to find out if we are running a 32-bit or 64-bit
image.

On Tegra platforms, this means we have to increase the mappings to
accomodate the new memmap entry.

Change-Id: If370d1e6cfcccd69b260134c1b462d8d17bee03d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch initilises the per-CPU GIC bits during cold boot and
secondary CPU power up. Commit 80c50eea

 accidentally left out this
part.

Change-Id: I73ce59dbc83580a84b827cab89fe7e1f65f9f130
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch udpates the SPE console driver to prepend '\r' to
'\n'. This fixes the alignment of prints seen by the host
machines on their UART ports.

Tested by collecting the logs from host PC using Cutecom

Reported by: Mustafa Bilgen <mbilgen@nvidia.com>

Change-Id: I6e0b412bd71ff5eb889582071df8c157da5175ed
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

As per ARM ARM D1.17.2, any physical IRQ interrupt received by the PE
will be treated as a wake-up event, if SCR_EL3.IRQ is set to '1',
irrespective of the value of the PSTATE.I bit value.

This patch programs the SCR_EL3.IRQ bit before entering CPU standby
state, to allow an IRQ to wake the PE. On waking up, the previous
SCR_EL3 value is restored.

Change-Id: Ie81cf3a7668f5ac35f4bf2ecc461b91b9b60650c
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch redefines the variable LIBC_SRCS for Tegra platforms,
to remove unused libc files from the list. This patch is a building
block to eventually use other libc implementations in the future.

Change-Id: Iccde5a75f5e2d6f4e2dbc6274beb423b80e846fd
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch introduces a build option 'OVERRIDE_LIBC' that platforms
can set to override libc from the BL image. The default value is '0'
to keep the library.

Change-Id: I10a0b247f6a782eeea4a0359e30a8d79b1e9e4e1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Minor cleanup

sgi/sgm: add a second maintainer for Arm's SGI and SGM platforms

Add a second maintainer for Arm's SGI and SGM platform support in
trusted firmware to handle the review and maintenance of
existing and upcoming platforms.

Change-Id: Ie7fa8da280d9351f7543122fb261d6ac6c7e15ad
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

GICv3: Allow probe for fewer GICR interfaces than exposed by the frame

plat: intel: Add BL2 support for Stratix 10 SoC

Previously the GICv3 redistributor probe function
(gicv3_rdistif_base_addrs_probe()) asserted that the number of
per-CPU redistributor interfaces expected to be probed by the
platform is equal to the number exported by the redistributor
frame. This is a problem in case the number of CPUs in the
platform is less than the number of redistributor interfaces
in the frame. Hence this patch removes the assertion check
and allows probe for fewer redistributor interfaces as required
by the platform.

Change-Id: I3449763a3ad70817224442cbe184d001030c9874
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Fixes related to BL33 image on Arm platforms

RPi3 SDHost driver

This adds BL2 support for Intel Stratix 10 SoC FPGA.
Functionality includes:
- Release and setup peripherals from reset
- Calibrate DDR
- ECC DDR Scrubbing
- Load FIP (bl31 and bl33)
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>

Also, update platform_def.h guidelines about includes in the porting
guide.

Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: Id7c22d76b896d1dcac18cdb0e564ce4e02583e33
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.

As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.

Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Remove dead code related to LOAD_IMAGE_V2=0

hikey960: EDMAC: leave channel 0 as secure

The BL33 image must not go past the end of DRAM.

Change-Id: I56668ab760d82332d69a8904d125d9a055aa91d5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

PLAT_ARM_NS_IMAGE_OFFSET is in fact not an offset relative to some base
address, it is an absolute address. Rename it to avoid any confusion.

Change-Id: I1f7f5e8553cb267786afe7e5f3cd4d665b610d3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

This patch adds myself to co-maintainer list of Raspberry Pi 3
platform.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

This patch inits SDHost in BL2 earlysetup. BL2 can start operating mmc
commands to read/write MMC raw blocks.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

This commit adds SDHost driver for RaspberryPi3. SDHost driver uses the
GPIO driver to connect the SDCard and SDHost. By using this driver it is
able to read/write raw blocks on SDCard.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

User Guide: Move ARM_PLAT_MT doc to Arm build flags

Platforms that do not support bpmp firmware, do not need access
to the PMC block from outside of the CPU complex. The agents
running on the CPU can always access the PMC through the EL3
exception space.

This patch restricts non-secure world access to the PMC block on
such platforms.

Change-Id: I2c4318dc07ddf6407c1700595e0f4aac377ba258
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

As per the latest recommendations from the hardware team, write access
needs to be disabled for APE, BPMP, NvDec and SCE clients. This patch
disables stream id register writes for these MC clients to implement
those recommendations.

Change-Id: I8887c0f2cc5bc3fc5bba42074810ba5c1d3f121f
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>

This patch updates the state machine to "not present" if the bpmp
firmware is not found in the system during boot. The suspend
handler also checks now if the interface exists, before updating
the internal state machine.

Reported by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

Change-Id: If8fd7f8e412bb603944555c24826855226e7f48c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch toggles the ring oscillator state across cluster idle
as DFLL loses its state. We dont want garbage values being written
to the pmic when we enter cluster idle state, so enable "open loop"
when we enter CC6 and restore the state to "closed loop" on exit.

Change-Id: I56f4649f57bcc651d6c415a6dcdc978e9444c97b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the PMC's DPD registers on resuming from System
Suspend, for all Tegra210 platforms that support the sc7entry-fw.

Change-Id: I7881ef0a5f609ed28b158bc2f4016abea3c7f305
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>

The BPMP firmware takes some time to initialise its state on exiting
System Suspend state. The CPU needs to synchronize with the BPMP during
this process to avoid any race conditions. This patch suspends and resumes
the BPMP interface across a System Suspend cycle, to fix this race.

Change-Id: I82a61d12ef3eee267bdd8d4386bed23397fbfd2d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds suspend and resume handlers for the BPMP
interface. Mark the interface as "suspended" before entering
System Suspend and verify that BPMP is alive on exit.

Change-Id: I74ccbc86125079b46d06360fc4c7e8a5acfbdfb2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

During System Suspend, the entire system loses its state. To allow Trusty
to save/restore its context and allow its TAs to participate in the suspend
process, it needs to look at the max affinity level being suspended. This
patch passes the max affinity level to Trusty to enable to do so.

Change-Id: If7838dae10c3f5a694baedb15ec56fbad41f2b36
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>