Skip to content

GitLab

Switch branch/tag
  1. 12 Oct, 2020 2 commits
  3. 09 Oct, 2020 6 commits
  5. 06 Oct, 2020 1 commit
    • Usama Arif's avatar
      plat/arm: common: add guard for arm_get_rotpk_info_regs · 3bfcc9d7
      Usama Arif authored 
      

Only define arm_get_rotpk_info_regs if ROTPK is in registers,
i.e. (ARM_ROTPK_LOCATION_ID == ARM_ROTPK_REGS_ID). This will
allow platform build without definition of TZ_PUB_KEY_HASH_BASE
if dedicated registers for ROTPK are not available on the platform.

Change-Id: I74ee2d5007f5d876a031a1efca20ebee2dede0c7
Signed-off-by: default avatarUsama Arif <usama.arif@arm.com>
      3bfcc9d7
  7. 05 Oct, 2020 2 commits
  9. 04 Oct, 2020 5 commits
  11. 02 Oct, 2020 1 commit
  13. 29 Sep, 2020 5 commits
    • Andre Przywara's avatar
      arm_fpga: Add post-build linker script · 01301b11
      Andre Przywara authored 
      

For the Arm Ltd. FPGAs to run, we need to load several payloads into the
FPGA's memory:
- Some trampoline code at address 0x0, to jump to BL31's entry point.
- The actual BL31 binary at the beginning of DRAM.
- The (generic) DTB image to describe the hardware.
- The actual non-secure payloads (kernel, ramdisks, ...)

The latter is application specific, but the first three blobs are rather
generic.
Since the uploader tool supports ELF binaries, it seems helpful to
combine these three images into one .axf file, as this also simplifies
the command line.

Add a post-build linker script, that combines those three bits into one
ELF file, together with their specific load addresses.
Include a call to "ld" with this linker script in the platform Makefile,
so it will be build automatically. The result will be called "bl31.axf".

Change-Id: I4a90da16fa1e0e83b51d19e5b1daf61f5a0bbfca
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      01301b11
    • Andre Przywara's avatar
      arm_fpga: Add ROM trampoline · f45c6d86
      Andre Przywara authored 
      

The application cores of the FPGAs used in Arm Ltd. start execution at
address 0x0. This is the location of some (emulated) ROM area (which can
be written to by the uploading tool).
Since the arm_fpga port is configured to run from DRAM, we load BL31 to
the beginning of DRAM (mapped at 2GB). This requires some small
trampoline code in the "ROM" to jump to the BL31 entry point.

To avoid some extra magic binary, add a tiny assembly file with that
trivial jump instruction to the tree, so this binary can be created
alongside BL31.

Change-Id: I9e4439fc0f093fa24dd49a8377c9edb030fbb477
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      f45c6d86
    • Andre Przywara's avatar
      arm_fpga: Add devicetree file · b48883c7
      Andre Przywara authored 
      

The FPGA images used in Arm Ltd. focus on CPU cores, so they share a
common platform, with a minimal set of peripherals (interconnect, GIC,
UART).
This allows to support most platforms with a single devicetree file.
The topology and number of CPU cores differ, but those will added at
runtime, in BL31. Other adjustments (GICR size, SPE node, command line)
are also done at this point.

Add the common devicetree file to TF-A's build system, so it can be
build together with BL31. At runtime, the resulting .dtb file should be
uploaded to the address given with FPGA_PRELOADED_DTB_BASE at build time.

Change-Id: I3206d6131059502ec96896e95329865452c9d83e
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      b48883c7
    • Andre Przywara's avatar
      arm_fpga: Remove SPE PMU DT node if SPE is not available · 40a0de19
      Andre Przywara authored 
      

The Statistical Profiling Extension (SPE) is an architectural feature we
can safely detect at runtime. However it still relies on one piece of
platform-specific information: the interrupt line it is connected
to. This requires SPE to be described in a devicetree node.

Since SPE support varies with the CPU cores found on an FPGA image, we
should detect the presence of SPE at runtime, and remove a potentially
existing SPE PMU node from the DT.

This allows to always have the SPE node in a generic devicetree file,
without risking exposing it on a CPU without this feature.

Change-Id: I73d83ea8509b03fe7bba20b9cce8d1335035fa31
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      40a0de19
    • Andre Przywara's avatar
      arm_fpga: Adjust GICR size in DT to match number of cores · 283e5595
      Andre Przywara authored 
      

The size of a GICv3 redistributor region depends on the number of
cores in the system. For the ARM FPGA port, we detect the topology at
runtime, and adjust the CPU DT nodes accordingly.
Now the size of the GICR region must also be adjusted, or Linux will
fail to initialise the GICv3.

Use the newly introduced function to overwrite the GICR size entry in
the GICv3 reg property. We count the number of existing cores by
iterating over the GICR frames until we find the LAST bit set in TYPER.

Change-Id: Ib69565600859de9b1b15ceb8495172cd26d16fce
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      283e5595
  15. 28 Sep, 2020 1 commit
  17. 25 Sep, 2020 2 commits
  19. 24 Sep, 2020 3 commits
    • Sami Mujawar's avatar
      plat/arm/css/sgi: Map flash used for mem_protect · 7c15a8c1
      Sami Mujawar authored 
      

The SGI platform defines the macro PLAT_ARM_MEM_PROT_ADDR which
indicates that the platform has mitigation for cold reboot attacks.

However, the flash memory used for the mem_protect region was not
mapped. This results in a crash when an OS calls PSCI MEM_PROTECT.

To fix this map the flash region used for mem_protect.

Change-Id: Ia494f924ecfe2ce835c045689ba8f942bf0941f4
Signed-off-by: default avatarSami Mujawar <sami.mujawar@arm.com>
      7c15a8c1
    • Usama Arif's avatar
      plat: tc0: enable TZC · 16796a25
      Usama Arif authored 
      

Change-Id: Ic2bb8482f0b602f6b7850d4fa553448bc4931edc
Signed-off-by: default avatarUsama Arif <usama.arif@arm.com>
      16796a25
    • Yann Gautier's avatar
      fdts: stm32mp1: realign device tree with kernel · 277d6af5
      Yann Gautier authored 
      

There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A

The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.

There are 4 packages available, for which  the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.

STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.

Some reordering is done in other files, and realign with kernel DT files.

The DDR files are generated with our internal tool, no changes in the
registers values.

Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      277d6af5
  21. 21 Sep, 2020 3 commits
  23. 15 Sep, 2020 3 commits
  25. 14 Sep, 2020 1 commit
  27. 10 Sep, 2020 4 commits
  29. 09 Sep, 2020 1 commit