GitLab

asm_macros: set the default assembly code alignment to 4 byte

Fix BL2 memory map when OP-TEE is the Secure Payload

The commit 3eb2d672

 optimizes the memory map for BL2 when TSP
is not present. But this also broke OP-TEE as it was reusing
the TSP mapping. This patch fixes this problem by adding a
separate mapping for OP-TEE in the BL2 memory map table.

Change-Id: I130a2ea552b7b62d8478081feb1f4ddf5292a118
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

uniphier: fix-up for PXs3 SoC

Due to a bug in the Boot ROM, the USB load API turned out not working
as expected.  It is unfixable because the Boot ROM is hard-wired.

Add work around code in TF to bypass the problematic Boot ROM code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

checkpatch.pl from Linux reports tons of coding style errors and
warnings.  I am just fixing under plat/socionext/uniphier/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM platforms: Map TSP only when TSPD is included

This patch ensures that the ARM_MAP_TSP_SEC_MEM memory region is mapped
in BL2 only if the TSPD has been included in the build. This saves one
entry in the plat_arm_mmap[] array and avoids to map extra memory when
it's not needed.

Change-Id: I6ae60822ff8f0de198145925b0b0d45355179a94
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

porting-guide.rst: Fix some sections' level

Juno: Define PLAT_LOG_LEVEL_ASSERT to LOG_LEVEL_INFO

Fix the level of the section
"13.   Function : plat_setup_psci_ops() [mandatory]",
including all the subsections.

Fix the level of the section
"12.7.   plat_psci_ops.pwr_domain_suspend_pwrdown_early() [optional]"
to lower it like the surrounding functions.

Change-Id: I781823bc96ece669f8fde4bd39c4e333c7bf4d1a
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

This patch fixes the PLAT_LOG_LEVEL_ASSERT to 40 which corresponds
to LOG_LEVEL_INFO. Having this level of log for assertions means that the
`assert()` will not generate the strings implied in the expression taken
as parameter. This allows to save some memory when Juno is built for
LOG_LEVEL = LOG_LEVEL_VERBOSE and DEBUG = 1.

Fixes ARM-software/tf-issues#511

Change-Id: Id84a40f803ab07a5a8f6e587167af96694a07d04
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Assembly routines are usually defined by using "func" and "endfunc":

    func foo
      ...
    endfunc foo

Currently, the "func" macro does not specify ".align" directive
by default.  It causes unaligned instruction under some circumstances.

As far as I tested, this problem happens for GCC 5 or older.  It did
not happen for GCC 6 or newer.  Taking into account that GCC 4.x / 5.x
is still used, make sure that assembly code is at least 4 byte aligned.

[ How to reproduce the problem ]

For example, use GCC 5.3 downloaded from Linaro:
http://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/
aarch64-linux-gnu/gcc-linaro-5.3.1-2016.05-x86_64_aarch64-linux-gnu.tar.xz

Expand mbedtls-2.4.2 to the current directory.

Try the following:

  $ git log --oneline -1
  77544efb

 Merge pull request #1071 from jeenu-arm/syntax-fix
  $ aarch64-linux-gnu-gcc --version | head -1
  aarch64-linux-gnu-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412
  $ make CROSS_COMPILE=aarch64-linux-gnu- PLAT=uniphier \
    TRUSTED_BOARD_BOOT=1 MBEDTLS_DIR=mbedtls-2.4.2
    ( snip build log )
  $ aarch64-linux-gnu-nm build/uniphier/release/bl1/bl1.elf | grep handler
  00000000800088f4 T bl1_fwu_smc_handler
  00000000800084c8 T bl1_smc_handler
  000000008000a6e0 t _panic_handler
  000000008000a8e0 W plat_error_handler
  000000008000a8e8 W plat_panic_handler
  000000008000a8d8 W plat_reset_handler
  000000008000a39f T reset_handler
  000000008000a367 t smc_handler
  000000008000a2ef t smc_handler64

You will notice "smc_handler64", "reset_handler", etc. are not properly
aligned.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Hikey: enable watchdog reset

fiptool: Update file open modes with 'b' (for Windows)

Don't use zero_normalmem in bl2_platform_setup

zero_normalmem only can zero memory when caches are enabled
and the target memory is a normal memory, otherwise an abort is
generated. In the case of EL3_PAYLOAD_BASE bl2_platform_setup was
calling zero_normalmem with device memory and it generated an abort.

Change-Id: If013603f209a12af488a9c54481f97a8f395b26a
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Unix does not distinguish binary and text modes.
On Windows the 'b' flag (e.g. "rb" instead of "r") is used to
indicate that files should be opened in binary mode.
This has no impact on Unix, but is needed on Windows to avoid
end-of-line issues.

Change-Id: I69424c55735d5d563d36c50bedd6357b8e05137e
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>

Add usage note for FVP model versions 11.0 and 8.5

Enable CnP bit for ARMv8.2 CPUs 

Cpu macro fixes

The internal synchronisation timings of the FVP model version
11.0 build 11.0.34 and version 8.5 build 0.8.5202 has been
changed compared to older version of the models.

This change may have an impact on how the model behaves depending
on the workload being run on the model. For example test failures
have been seen where the primary core has powered on a secondary
core but was then starved of host CPU time and so was not able to
update power status, resulting a test failure due to an incorrect
status. This, or similar behaviour, is not to be expected from
real hardware platforms.

This patch adds a usage note on how to launch these models so
that internal synchronisation timing matches that of the older
version of the models, specifically adding the -Q 100 option.

Change-Id: If922afddba1581b7246ec889b3f1598533ea1b7e
Signed-off-by: David Cunado <david.cunado@arm.com>

plat/arm: Fix ARM_INSTANTIATE_LOCK syntax anomaly

CORTEX_A57_ACTLR_EL1 macro refers to the CPUACTLR_EL1 register. Since
ACTLR_EL1 is a different register (not implemented in Cortex-A57) this
patch renames this macro for clarity.

Change-Id: I94d7d564cd2423ae032bbdd59a99d2dc535cdff6
Signed-off-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>

Constants named as *ACTLR* refer in fact to the CPUACTRL_EL1 register.
Since ACTLR and ACTRL_EL1 are different registers this patch renames
these constants for clarity.

Change-Id: I2a9e402dab7b0fcb6e481ee0d8a11eda943ed299
Signed-off-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>

At present, various CPU register macros that refer to CPUACTLR are named
ACTLR. This patch fixes that.

The previous register names are retained, but guarded by the
ERROR_DEPRECATED macro, so as not to break platforms that continue using
the old names.

Change-Id: Ia872196d81803f8f390b887d149e0fd054df519b
Signed-off-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>

In order to avoid Undefined behavior, left operand in left-shift
expressions needs to be unsigned, and of sufficient size. The safest and
most consistent approach is to use unsigned long long type.

Change-Id: I9612f16a6e6ea4c7df62a02497d862abf19b8e1b
Signed-off-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>

The current definition of ARM_INSTANTIATE_LOCK macro includes a
semicolon, which means it's omitted where it's used. This is anomalous
for a C statement in global scope.

Fix this by removing semicolon from the definition; and where it's a
NOP, declare a file-scoped variable explicitly tagged as unused to avoid
compiler warning.

No functional changes.

Change-Id: I2c1d92ece4777e272a025011e03b8003f3543335
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

rockchip/rk3399: Support Turning off VD_LOGIC during suspend-to-ram 

Optee arm platform common

update the interrupt diagrams

when shutdown logic power rail, the some sgrf register
value will reset, so need to reinitilize secure.

Change-Id: I8ad0570432e54441fe1c60dd2960a81fd58f7163
Signed-off-by: Lin Huang <hl@rock-chips.com>

we will use timer in pmusarm, when logic power rail shutdown,
the secure timer will gone, so need to initial it in pmusram.

Change-Id: I472e7eec3fc197f56223e6fff9167556c1c5e3bc
Signed-off-by: Lin Huang <hl@rock-chips.com>

we do not have enough pmusram space now, so use slice1 to restore
ddr slice1 ~ slice4, that's will save more pmusram space.

Change-Id: Id54a7944f33d01a8f244cee6a8a0707bfe4d42da
Signed-off-by: Lin Huang <hl@rock-chips.com>

Change-Id: Ia59adf48cf14eb627721264765bce50cb31065ef
Signed-off-by: Lin Huang <hl@rock-chips.com>

pd_alive control cru, grf, timer, gpio and wdt, when
turn off logic power rail, these register value will
back to reset value, we need to save them value in suspend
and restore them when resuem, since timer will reinitial
in kernel, so it not need to save/restore.

Change-Id: I0fc2a011d3cdc04b66ffbf728e769eb28b51ee38
Signed-off-by: Lin Huang <hl@rock-chips.com>

At the system boot time we need enable watchdog reset, otherwise after
the watchdog is timeout it cannot reset the SoC. We need set the bit 0
and bit 16 together, the bit 16 is mask bit so after set bit 16 we have
permission to operate bit 0 and bit 0 is watchdog reset enabling bit.
Signed-off-by: Leo Yan <leo.yan@linaro.org>

when logic power rail shutdown, CRU register will back to reset
value, ddr use abpll as clock source when do suspend, we need to save
and dpll value in pmusram, then set back these ddr clock back to dpll
when dddr resume.

Change-Id: I95dc0173649e8515859cfa46b40a606e0cc2fe3f
Signed-off-by: Lin Huang <hl@rock-chips.com>

when shutdown logic power rail, the uart register value will reset,
so need to reinitilize debug uart.

Change-Id: I48d3535c0068fd671dea6ea32e908612992faf62
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

FVP: Always assume shifted affinity with MT bit