- 07 May, 2019 1 commit
-
-
Soby Mathew authored
The workarounds for errata 1257314, 1262606, 1262888 and 1275112 are added to the Cortex-A76 cpu specific file. The workarounds are disabled by default and have to be explicitly enabled by the platform integrator. Change-Id: I70474927374cb67725f829d159ddde9ac4edc343 Signed-off-by: Soby Mathew <soby.mathew@arm.com>
-
- 25 Apr, 2019 1 commit
-
-
Heiko Stuebner authored
Similar to bl31_warm_entrypoint, sp_min-based platforms may need that for special resume handling. Therefore move it from the private header to the sp_min platform header. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Change-Id: I40d9eb3ff77cff88d47c1ff51d53d9b2512cbd3e
-
- 18 Apr, 2019 1 commit
-
-
Louis Mayencourt authored
This patch forces all cacheable atomic instructions to be near, which improves performance in highly contended parallelized use-cases. Change-Id: I93fac62847f4af8d5eaaf3b52318c30893e947d3 Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
-
- 17 Apr, 2019 5 commits
-
-
Aditya Angadi authored
The BL1 stage setup code for ARM platforms sets up the SP805 watchdog controller as the secure watchdog. But not all ARM platforms use SP805 as the secure watchdog controller. So introduce two new ARM platform code specific wrapper functions to start and stop the secure watchdog. These functions then replace the calls to SP805 driver in common BL1 setup code. All the ARM platforms implement these wrapper functions by either calling into SP805 driver or the SBSA watchdog driver. Change-Id: I1a9a11b124cf3fac2a84f22ca40acd440a441257 Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
-
Aditya Angadi authored
Add a driver for configuring the SBSA Generic Watchdog which aids in the detection of errant system behaviour. Change-Id: I5a1e7149c69fd8b85be7dfbcf511f431339946f4 Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
-
Louis Mayencourt authored
Under certain near idle conditions, DSU may miss response transfers on the ACE master or Peripheral port, leading to deadlock. This workaround disables high-level clock gating of the DSU to prevent this. Change-Id: I820911d61570bacb38dd325b3519bc8d12caa14b Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
-
Louis Mayencourt authored
Change-Id: I50708f6ccc33059fbfe6d36fd66351f0b894311f Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
-
Louis Mayencourt authored
Under specific conditions, the processor might issue an eviction and an L2 cache clean operation to the interconnect in the wrong order. Set the CPUACTLR.ENDCCASCI bit to 1 to avoid this. Change-Id: Ide7393adeae04581fa70eb9173b742049fc3e050 Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
-
- 12 Apr, 2019 1 commit
-
-
Ambroise Vincent authored
The implementation of the heap function plat_get_mbedtls_heap() becomes mandatory for platforms supporting TRUSTED_BOARD_BOOT. The shared Mbed TLS heap default weak function implementation is converted to a helper function get_mbedtls_heap_helper() which can be used by the platforms for their own function implementation. Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
- 08 Apr, 2019 4 commits
-
-
Alexei Fedorov authored
Change-Id: I0a81f4ea94d41245cd5150de341b51fc70babffe Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
-
Joel Hutton authored
This changes the auth_img_desc_t struct to have pointers to struct arrays instead of struct arrays. This saves memory as many of these were never used, and can be NULL pointers. Note the memory savings are only when these arrays are not initialised, as it is assumed these arrays are fixed length. A possible future optimisation could allow for variable length. memory diff: bl1: bl2: text text -12 -12 bss bss -1463 0 data data -56 -48 rodata rodata -5688 -2592 total total -7419 -2652 Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
-
Joel Hutton authored
When Trusted Board Boot is enabled, we need to specify the Chain of Trust (CoT) of the BL1 and BL2 images. A CoT consists of an array of image descriptors. The authentication module assumes that each image descriptor in this array is indexed by its unique image identifier. For example, the Trusted Boot Firmware Certificate has to be at index [TRUSTED_BOOT_FW_CERT_ID]. Unique image identifiers may not necessarily be consecutive. Also, a given BL image might not use all image descriptors. For example, BL1 does not need any of the descriptors related to BL31. As a result, the CoT array might contain holes, which unnecessarily takes up space in the BL binary. Using pointers to auth_img_desc_t structs (rather than structs themselves) means these unused elements only use 1 pointer worth of space, rather than one struct worth of space. This patch also changes the code which accesses this array to reflect the change to pointers. Image descriptors not needed in BL1 or BL2 respectively are also ifdef'd out in this patch. For example, verifying the BL31 image is the responsibility of BL2 so BL1 does not need any of the data structures describing BL31. memory diff: bl1: bl2: text text -20 -20 bss bss -1463 0 data data -256 -48 rodata rodata -5240 -1952 total total -6979 -2020 Change-Id: I163668b174dc2b9bbb183acec817f2126864aaad Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
-
Heiko Stuebner authored
The Cortex-A12's primary part number is 0xC0D not 0xC0C, so fix that to make the A12's cpu operations findable. Change-Id: I4440a039cd57a2fe425fd8a8ec5499ca8e895e31 Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-
- 05 Apr, 2019 1 commit
-
-
Manish Pandey authored
ARMv7 and Cortex-A32(ARMv8/aarch32) uses "arm-linux-gnueabi" toolchain which has both soft-float and hard-float variants and so there could be scenarios where soft-float toolchain is used.Even though TF-A documentation recommends to use hard-float toolchain for aarch32 but there are external projects where we cannot mandate the selection of toolchain and for those projects at least the build should not fail. Current TF-A source fails to build with soft-float toolchain because assembler does not recognizes "vmsr" instruction which is required to enable floating point unit. To avoid this piece of code being compiled with soft-float toolchain add predefined macro guard " __SOFTFP__" exposed by soft-float toolchain. Change-Id: I76ba40906a8d622dcd476dd36ab4d277a925996c Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
-
- 03 Apr, 2019 4 commits
-
-
Ambroise Vincent authored
Change-Id: I14fcabbdfd53153d1d5f187f6f8b23a045794408 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
Types tzc_action_t and tzc_region_attributes_t are deprecated. Change-Id: Ieefeb8521a0e1130f39d09b5c0d2728f05084773 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
The old version of the macro is deprecated. Commit cc5859ca ("Multi-console: Deprecate the `finish_console_register` macro") provides more details. Change-Id: I3d1cdf6496db7d8e6cfbb5804f508ff46ae7e67e Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Antonio Nino Diaz authored
This gives each Secure Partition complete freedom on its address space. Previously, the memory used by the exception vectors was reserved and couldn't be used. Also, it always had to be mapped, forcing SPM to generate translation tables that included the exception vectors as well as the Partition memory regions. With this change, partitions can reduce their address space size easily. Change-Id: I67fb5e9bdf2870b73347f23bff702fab0a8f8711 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 02 Apr, 2019 1 commit
-
-
Remi Pommarel authored
In order to configure and boot SCP, BL31 has to compute and send the SHA-256 of the firmware data via scpi. Luckily Amlogic GXL SOC has a DMA facility that could be used to offload SHA-256 computations. This adds basic support of this hardware SHA-256 engine. Signed-off-by: Remi Pommarel <repk@triplefau.lt>
-
- 01 Apr, 2019 1 commit
-
-
Ambroise Vincent authored
Improved support for W=1 compilation flag by solving missing-prototypes and old-style-definition warnings. The libraries are compiling with warnings (which turn into errors with the Werror flag). Outside of libraries, some warnings cannot be fixed without heavy structural changes. Change-Id: I1668cf99123ac4195c2a6a1d48945f7a64c67f16 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
- 15 Mar, 2019 1 commit
-
-
John Tsichritzis authored
Change-Id: I75ee39d78c81ecb528a671c0cfadfc2fe7b5d818 Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
- 14 Mar, 2019 2 commits
-
-
John Tsichritzis authored
Change-Id: If56d1e200a31bd716726d7fdc1cc0ae8a63ba3ee Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
John Tsichritzis authored
This patch applies the new MSR instruction to directly set the PSTATE.SSBS bit which controls speculative loads. This new instruction is available at Neoverse N1 core so it's utilised. Change-Id: Iee18a8b042c90fdb72d2b98f364dcfbb17510728 Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
-
- 13 Mar, 2019 3 commits
-
-
Ambroise Vincent authored
Change-Id: Ic3004fc43229d63c5a59ca74c1837fb0604e1f33 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
This erratum can only be worked around on revisions >= r3p0 because the register that needs to be accessed only exists in those revisions[1]. [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0438g/CIHEAAAD.html Change-Id: I5d773547d7a09b5bd01dabcd19ceeaf53c186faa Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Masahisa Kojima authored
MHU doorbell driver requires arm platform specific macro "PLAT_CSS_MHU_BASE". Rename it to "PLAT_MHUV2_BASE", so that platforms other than arm can use generic MHU doorbell driver. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
-
- 12 Mar, 2019 2 commits
-
-
Paul Beesley authored
This TODO was added five years ago so I assume that there is not going to be a shutdown API added after all. Change-Id: If0f4e2066454df773bd9bf41ed65d3a10248a2d3 Signed-off-by: Paul Beesley <paul.beesley@arm.com>
-
Tien Hock, Loh authored
There are some issues with synopsys MMC driver: - CMD8 should not expect data (for SD) - ACMD51 should expect data (Send SCR for SD) - dw_prepare should not dictate size to be MMC_BLOCK_SIZE, block size is now handled in the dw_prepare function - after the CMD completes, when doing dw_read, we need to invalidate cache and wait for the data transfer to complete - Need to set FIFO threshold, otherwise DMA might never get the interrupt to read or write Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
-
- 07 Mar, 2019 1 commit
-
-
Tien Hock, Loh authored
Some bugs in MMC stack needs to be fixed: - scr cannot be local as this will cause cache issue when invalidating after the read DMA transfer is completed - ACMD41 needs to send voltage information in initialization, otherwise the command is a query, thus will not initialize the controller - when checking device state, retry until the retries counter goes to zero before failing Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
-
- 04 Mar, 2019 1 commit
-
-
Dimitris Papastamos authored
SSBS support is determined by checking ID_AA64PFR1_EL1 and not ID_AA64PFR0_EL1. Fixes ARM-Software/tf-issues#679 Change-Id: I8ecba13b850995ec6a6ede3c2a1e02e69a3a95db Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
-
- 01 Mar, 2019 1 commit
-
-
Antonio Nino Diaz authored
Check for both IMPLEMENTATION_DEFINED and Architected algorithms of Address Authentication. Change-Id: I209dcc6087172cfef7baf8d09e0454628f02cbd0 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 28 Feb, 2019 8 commits
-
-
Antonio Nino Diaz authored
Fix some typos and clarify some sentences. Change-Id: Id276d1ced9a991b4eddc5c47ad9a825e6b29ef74 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
Louis Mayencourt authored
In AArch32, execution of 2 instructions with opposite condition code might lead to either a data corruption or a CPU deadlock. Set the bit 12 of the Diagnostic Register to prevent this. Change-Id: I22b4f25fe933e2942fd785e411e7c0aa39d5c1f4 Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
-
Louis Mayencourt authored
Complete the MPAM enablement in TF-A for lower ELs by enabling the EL2 traps in MPAMHCR_EL2 and MPAM2_EL2.This prevents an MPAM-unaware-hypervisor to be restricted by an MPAM-aware-guest. Change-Id: I47bf3f833fa22baa590f83d49cc0e3f2974e698d Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
-
Ambroise Vincent authored
The workarounds for these errata are so closely related that it is better to only have one patch to make it easier to understand. Change-Id: I0287fa69aefa8b72f884833f6ed0e7775ca834e9 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
Change-Id: Ice3dcba8c46cea070fd4ca3ffb32aedc840589ad Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
Change-Id: Ic42b37b8500d5e592af2b9fe130f35a0e2db4d14 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
Change-Id: I094e5cb2c44618e7a4116af5fbb6b18078a79951 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
Ambroise Vincent authored
Change-Id: Iebd45ef5e39ee7080235fb85414ce5b2e776f90c Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
-
- 27 Feb, 2019 1 commit
-
-
Varun Wadekar authored
This patch provides support for using the scatterfile format as the linker script with the 'armlink' linker for Tegra platforms. In order to enable the scatterfile usage the following changes have been made: * provide mapping for ld.S symbols in bl_common.h * include bl_common.h from all the affected files * update the makefile rules to use the scatterfile and armlink to compile BL31 * update pubsub.h to add sections to the scatterfile NOTE: THIS CHANGE HAS BEEN VERIFIED WITH TEGRA PLATFORMS ONLY. Change-Id: I7bb78b991c97d74a842e5635c74cb0b18e0fce67 Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
-