GitLab

This patch stops initialising the same UART console, as a "crash"
console. The normal and the crash consoles use the same UART port
and hence the crash console init function now only checks if the
console is ready to be used.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Replace the occurrences of signed condition codes where it was
unnecessary by an unsigned test as the unsigned tests allow the full
range of unsigned values to be used without inverting the result with
some large operands.

This reverts commit ee2c909947e0a9c4a2562689a7bfc863bc4794f9.

Change-Id: Ibaa5e8dfae6ad65bada3cda5f683d181fee37e53
Acked-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

This patch enables L2 ECC and Parity Protection for ARM Cortex-A57 CPUs
for Tegra SoCs.

Change-Id: I038fcd529991d0201a4951ce2730ab71b1c980f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch includes platform_def.h required to access UART macros -
"TEGRA_BOOT_UART_CLK_IN_HZ" and "TEGRA_CONSOLE_BAUDRATE" from
tegra_helpers.S.

Change-Id: Ieb63968a48dc299d03e81ddeb1ccc871cf3397a1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to relocate BL3-1 code to BL31_BASE in case
we cold boot to a different address. This is particularly useful to
maintain compatibility with legacy BL2 code.

This patch also checks to see if the image base address matches either
the TZDRAM or TZSRAM base.

Change-Id: I72c96d7f89076701a6ac2537d4c06565c54dab9c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The BL2 fills in the UART controller ID to be used as the normal as
well as the crash console on Tegra platforms. The controller ID to
UART controller base address mapping is handled by each Tegra SoC
the base addresses might change across Tegra chips.

This patch adds the handler to parse the platform params to get the
UART ID for the per-soc handlers.

Change-Id: I4d167b20a59aaf52a31e2a8edf94d8d6f89598fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch modifies platform_get_core_pos() to use the Cluster ID
field as well to calculate the final index value. This helps the
system to store CPU data for multi-cluster configurations.

Change-Id: I76e35f723f741e995c6c9156e9d61b0b2cdd2709
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables the processor retention and L2/CPUECTLR read/write
access from the NS world only for Cortex-A57 CPUs on the Tegra SoCs.

Change-Id: I9941a67686ea149cb95d80716fa1d03645325445
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The PL011 TRM (ARM DDI 0183G) specifies that the UART must be
disabled before any of the control registers are programmed. The
PL011 driver included in TF does not disable the UART, so the
initialization in BL2 and BL31 is violating this requirement
(and potentially in BL1 if the UART is enabled after reset).

This patch modifies the initialization function in the PL011
console driver to disable the UART before programming the
control registers.

Register clobber list and documentation updated.

Fixes ARM-software/tf-issues#300

Change-Id: I839b2d681d48b03f821ac53663a6a78e8b30a1a1

This patch modifies the Tegra port to support the new platform
APIs so that we can disable the compat layer. This includes
modifications to the power management and platform topology code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch programs the CPUECTLR_EL1 and L2ECTLR_EL1 registers,
so that the core waits for 512 generic timer CNTVALUEB ticks before
entering retention state, after executing a WFI instruction.

This functionality is configurable and can be enabled for platforms
by setting the newly defined 'ENABLE_L2_DYNAMIC_RETENTION' and
'ENABLE_CPU_DYNAMIC_RETENTION' flag.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

A new config, ENABLE_NS_L2_CPUECTRL_RW_ACCESS, allows Tegra platforms to
enable read/write access to the L2 and CPUECTRL registers. T210 is the
only platform that needs to enable this config for now.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

T210 is the latest chip in the Tegra family of SoCs from NVIDIA. It is an
ARM v8 dual-cluster (A57/A53) SoC, with any one of the clusters being active
at a given point in time.

This patch adds support to boot the Trusted Firmware on T210 SoCs. The patch
also adds support to boot secondary CPUs, enter/exit core power states for
all CPUs in the slow/fast clusters. The support to switch between clusters
is still not available in this patch and would be available later.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>