GitLab

Earlier, we were setting "System Suspend" as the power state for all system
states. This caused incorrect system state during a cluster power down.

This patch fixes this anomaly and sets the correct power state during a
cluster/system power down.

Change-Id: Ibd002930e0ae103e381e0a19670c3c4d057e7cb7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds max retries for all ARI requests and asserts
if the ARI request is still busy.

Change-Id: I454ad9b557bb59e513e4c0c6f071275c87d0e07a
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the Tegra micro-seconds controller to the
memory map. This allows us to use the delay_timer functionality.

Change-Id: Ia8b148a871949bfede539974cacbe0e93ec7e77c
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves the platform delay timer init to early BL31
platform setup, so that platforms can use the udelay/mdelay
routines in the early init code.

Change-Id: I6fe20b76176ea22589539c180c5b6f9d09eda8de
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

One assert depends on code that is conditionally compiled based on the
DEBUG define. This patch modifies the conditional inclusion of such code
so that it is based on the ENABLE_ASSERTIONS build option.

Change-Id: Ic5659a3db8632593b9d2e83dac6d30afd87c131d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables the assert in the context save routine
by default, for all flavours of the build.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch changes the platform Makefile to set `ENABLE_ASSERTIONS` to
1 instead of the deprecated option `ASM_ASSERTION`. This also pulls in
C assertions in release mode.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch groups all the platform configuration macros into
the common platform.mk makefile.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The CSS power management layer previously allowed to suspend system
power domain level via both PSCI CPU_SUSPEND and PSCI SYSTEM_SUSPEND
APIs. System suspend via PSCI CPU_SUSPEND was always problematic to
support because of issues with targeting wakeup interrupts to
suspended cores before the per-cpu GIC initialization is done. This
is not the case for PSCI SYSTEM_SUSPEND API because all the other
cores are expected to be offlined prior to issuing system suspend and
PSCI CPU_ON explicit calls will be made to power them on. Hence the Juno
platform used to downgrade the PSCI CPU_SUSPEND request for system
power domain level to cluster level by overriding the default
`plat_psci_pm_ops` exported by CSS layer.

Given the direction the new CSS platforms are evolving, it is best to
limit the system suspend only via PSCI SYSTEM_SUSPEND API for all
CSS platforms. This patch makes changes to allow system suspend
only via PSCI SYSTEM_SUSPEND API. The override of `plat_psci_ops`
for Juno is removed.

Change-Id: Idb30eaad04890dd46074e9e888caeedc50a4b533
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch sanity checks the SMMU context created by the platform
code. The first entry contains the size of the array; which the
driver now verifies before moving on with the save.

This patch also fixes an error in the calculation of the size of
the context that gets copied to TZDRAM.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for SP_MIN on JUNO platform.
The changes include addition of AArch32 assembly files,
JUNO specific SP_MIN make file and miscellaneous changes
in ARM platform files to enable support for SP_MIN.

Change-Id: Id1303f422fc9b98b9362c757b1a4225a16fffc0b
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Following steps are required to boot JUNO in AArch32 state:
1> BL1, in AArch64 state, loads BL2.
2> BL2, in AArch64 state, initializes DDR.
  Loads SP_MIN & BL33 (AArch32 executable)images.
  Calls RUN_IMAGE SMC to go back to BL1.
3> BL1 writes AArch32 executable opcodes, to load and branch
  at the entrypoint address of SP_MIN, at HI-VECTOR address and
  then request for warm reset in AArch32 state using RMR_EL3.

This patch makes following changes to facilitate above steps:
* Added assembly function to carry out step 3 above.
* Added region in TZC that enables Secure access to the
  HI-VECTOR(0xFFFF0000) address space.
* AArch32 image descriptor is used, in BL2, to load
  SP_MIN and BL33 AArch32 executable images.

A new flag `JUNO_AARCH32_EL3_RUNTIME` is introduced that
controls above changes. By default this flag is disabled.

NOTE: BL1 and BL2 are not supported in AArch32 state for JUNO.

Change-Id: I091d56a0e6d36663e6d9d2bb53c92c672195d1ec
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

If there is a pending interrupt, it is possible for the AP to come out
of the final WFI before SCP has a chance to act on it.  Prevent this
by disabling the GIC CPU interface before issuing a WFI.

Previously, SCP would not wait on WFI before taking an action but
would shut down the core or system regardless.

Change-Id: Ib0bcf69a515d540ed4f73c11e40ec7c863e39c92
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.

All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.

ASM_ASSERTION has been removed from the user guide.

Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch fixes the size used to save the context, when the
device enters System Suspend.

Reported by: David Cunado
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

ARM platforms have migrated to the translation tables library v2.
However, for testing purposes, it can be useful to temporarily switch
back to the old version.

This patch introduces the option `ARM_XLAT_TABLES_LIB_V1`, that switches
to v1 of the library when is set to 1. By default, it is 0, so that ARM
platforms use the new version unless specifically stated.

Updated User Guide.

Change-Id: I53d3c8dd97706f6af9c6fca0364a88ef341efd31
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

On Tegra systems, there are multiple software components that
require to interact with MCE. The components can either be 32-bit
or 64-bit payloads. This patch supports MCE SMC functions ID for
AARCH32 and AARCH64 architectures to support such clients.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Not having U or ULL as a suffix for these enums causes
a lot of unnecessary MISRA issues. This patch adds U or
ULL suffix to these common enums to reduce number of
MISRA issues.
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch stops initialising the same UART console, as a "crash"
console. The normal and the crash consoles use the same UART port
and hence the crash console init function now only checks if the
console is ready to be used.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for fake system suspend (SC7).
This is a debug mode, to ensure that a different code path is
executed for cases like pre-silicon development, where a
full-fledged SC7 is not possible in early stages.

This particular patch ensures that, if fake system suspend is
enabled (denoted by tegra_fake_system_suspend variable
having a non-zero value), instead of calling WFI, a request
for a warm reset is made for starting the SC7 exit procedure.

This ensures that the code path of kernel->ATF and back to
kernel is executed without depending on other components
involved in SC7 code path.

Additionally, this patch also adds support for SMC call
from kernel, enabling fake system suspend mode.
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch restores the MC_TXN_OVERRIDE settings when we exit from
System Suspend.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

During boot, USB3 and flash media (SDMMC/SATA) devices need access to
IRAM. Because these clients connect to the MC and do not have a direct
path to the IRAM, the MC implements AHB redirection during boot to allow
path to IRAM. In this mode, accesses to a programmed memory address aperture
are directed to the AHB bus, allowing access to the IRAM. The AHB aperture
is defined by the IRAM_BASE_LO and IRAM_BASE_HI registers, which are
initialized to disable this aperture. Once bootup is complete, we must
program IRAM base/top, thus disabling access to IRAM.

This patch provides functionality to disable this access. The tegra port
calls this new function before jumping to the non-secure world during
cold boot.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to read the chip id and identify if
the current platform is Tegra186.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch programs MC transaction overrides settings using
mc_txn_override_cfgs array for all Tegra chips beyond Tegra186
rev. A01
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

GCC version 4.8 (and presumably earlier) warn when non-standard types are
used for bitfield definitions when -pedantic is enabled. This prevents TF
from being built with such toolchains, since -Werror -pedantic options are
used.

gcc-4.9 removed this warning; -pedantic is intended to cause gcc to emit a
warning in all cases required by the standard, but the standard does not
require a warning in this case.

See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57773

Signed-off-by: Stephen Warren <swarren@nvidia.com>

This patch adds flexibility to the code to initialise multiple SMMU
devices. The base address macro name has been changed to make it
explicit that we support multiple SMMUs.

Change-Id: Id4854fb010ebeb699512d79c769de24050c2ad69
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch empowers the platforms to provide an array with the
registers that must be saved/restored across System Suspend.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables the 'xlat_table_v2' library for the Tegra Memory
Controller driver. This library allows us to dynamically map/unmap
memory regions, with MMU enabled.

The Memory Controller driver maps/unmaps non-overlapping Video Memory
region, to clean it of any secure contents, before it resizes the
region.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch makes the default implementation of plat_core_pos_by_mpidr()
as weakly linked, so that platforms can override it with their own.

Tegra186, for one, does not have CPU IDs 2 and 3, so it has its own
implementation of plat_core_pos_by_mpidr().

Change-Id: I7a5319869c01ede3775386cb95af1431792f74b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch empowers the platforms to provide the settings (e.g. stream ID,
security setting, transaction overrides) required by the Memory Controller
driver. This allows the platforms to program the Memory Controller as per
their needs and makes the driver scalable.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the memory controller configuration setting, which
allowed non-secure access to the TZSRAM memory.

Change-Id: Ic13645ba6a7694f192565962df40ca4fb8130f23
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This ARI call enables the EDBGREQ feature in the CCPLEX,
which will cause the CPUs to enter debug state instead of
vectoring to sw (ie MCA handler) upon receiving an async
abort signal.

Change-Id: Ifcb0e11446b6ac55179e3350d8f02b60ba32c94d
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the ARI header file to v3.1.

Change-Id: I3e58cf50d27fb6e72062bb9d9782b75296b32025
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.

Change-Id: Ib67eda64b09f26fb2f427f0d624f057081473132
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a config to the memory controller driver to enable SMMU
device init during boot. Tegra186 platforms keeps it enabled by default,
but future platforms might not support it.

Change-Id: Iebe1c60a25fc1cfb4c97a507e121d6685a49cb83
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new SMC function ID to read the refclk and coreclk
clock counter values from the Activity Monitor. The non-secure world
requires this information to calculate the CPU's frequency.

Formula: "freq = (delta_coreclk / delta_refclk) * refclk_freq"

The following CPU registers have to be set by the non-secure driver
before issuing the SMC:

X1 = MPIDR of the target core
X2 = MIDR of the target core

Change-Id: I296d835def1f5788c17640c0c456b8f8f0e90824
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new config to enable MC settings for the AFIW
and AFIR devices. Platforms must enable this config on their own.

Change-Id: I53b450117e4764ea76d9347ee2928f9be178b107
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves the smmu driver introduced by the Tegra186 port
to tegra/common so that future chips can (re)use it.

Change-Id: Ia44c7f2a62fb2d8869db3a44742a8c6b13c49036
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch splits the MCE driver into public and private interfaces
to allow usage of common functionality across multiple SoCs.

Change-Id: Ib58080e730d72f11ff79507d8e0acffb2ad5c606
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The printf() isn't used by the firmware itself, just by the tools under
the ./tools/ folder. Then tf_printf will unconditionally print.
Remove the unused print_dram_status_info() function.

Change-Id: Ie699ccb54a5be9a2cbbd7b8d4193b57075a2f57a
Signed-off-by: Caesar Wang <wxt@rock-chips.com>