GitLab

The slave ports of LD20 CCI-500 are connected as follows:

  S0: CA53
  S1: CA72

Be careful because the slave interface is not arranged in the
cluster number order (CA72: cluster 0, CA53: cluster 1).
Root-caused-by: Tetsuya Yoshizaki <yoshizaki.tetsuya@socionext.com>
Signed-off-by: Satoshi Ikawa <ikawa.satoshi@socionext.com>

Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.

Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>

Looks like this is requirement in the pre-merge static analysis.

misra_violation: [Required] MISRA C-2012 Rule 7.2 violation:
Unsigned constants must be declared with U or u suffix.

Adding ULL as requested.  I used ULL() macros for BL*_{BASE,LIMIT}
because they are referenced from linker scripts.
Requested-by: David Cunado <david.cunado@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the xlat region of the on-chip SRAM is always allocated
for all BL images.

The access to the on-chip SRAM is necessary for loading images from
a USB memory device (i.e. when updating firmware), so unneeded for
the usual boot procedure.

To avoid this waste, allocate the xlat region dynamically only for
BL2, and only when it is necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 247fc043

 ("uniphier: switch to BL2-AT-EL3 and remove BL1
support") accidentally changed the location of BL31 and BL32.  The
new memory map overlaps with the audio DSP images, also gives impact
to OP-TEE.  They are both out of control of ARM Trusted Firmware, so
not easy to change.  This commit restores the image layout that was
originally used prior to the BL2-AT-EL3 migration.
Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Allow to handle GZIP-compressed images by giving FIP_GZIP=1 from the
command line.

- Images are GZIP-compressed, then packed into FIP.  If Trusted Board
  Boot is enabled, certificates are generated based on the compressed
  images.

- GZIP decompressor is linked into BL2 to decompress images at
  run-time.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In the next commit, I will have more usecases to get struct image_info
from image ID.  It is better to make a helper function at a different
layer.  I do not need the current uniphier_image_descs_fixup() since
the code is small enough to be squashed into the caller side.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

UniPhier platform implements non-TF boot ROM.  Prior to the BL2-AT-EL3
support, BL1 (worked as a pseudo ROM) was needed just for ensuring BL2
is entered at EL1-S.  Now, this platform is able to avoid this waste.

Enable the BL2_AT_EL3 option, and remove BL1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The warm boot mailbox code is compiled if PROGRAMMABLE_RESET_ADDRESS
is disabled.

The warm boot mailbox is useless for UniPhier SoC family because BL1
is not the first image.  The UniPhier platform implements non-TF ROM,
then BL1 works as a pseudo ROM, so it is never executed in the warm
boot.

The reset vector address is not actually programmable for UniPhier
platform, but it should not hurt to enable PROGRAMMABLE_RESET_ADDRESS
to disable the mailbox and remove pointless plat_get_my_entrypoint.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The `override ERROR_DEPRECATION = 1` setting in uniphier platform
makes deprecation of API difficult. Hence removing the same. This
flag should be specified on the command line if needed.

Change-Id: I8c82d8d13944e450a8cd636de3326137c04d7560
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

It is not necessary to read data from stdin.  The input file name
is ripped off by -n option, anyway.  I still use the redirect for
the output to specify the output file name.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The build log should be indented with two spaces for correct alignment.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The current IO block buffer overlaps with BL2 image location.
So, BL2 may corrupt itself.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pre-v8.2 platforms such as the Juno platform does not have
the Scalable Vector Extensions implemented and so the build
option ENABLE_SVE is set to zero.

This has a minor performance improvement with no functional
impact.

Change-Id: Ib072735db7a0247406f8b60e325b7e28b1e04ad1
Signed-off-by: David Cunado <david.cunado@arm.com>

Building the UniPhier platform in parallel with TRUSTED_BOARD_BOOT=1
could fail due to non-existing directory.  It might be difficult to
reproduce, but here is an easier way to trigger the problem:

$ make PLAT=uniphier TRUSTED_BOARD_BOOT=1 MBEDTLS_DIR=mbedtls certificates
  OPENSSL build/uniphier/release/rot_key.pem
/bin/sh: 1: cannot create build/uniphier/release/rot_key.pem: Directory nonexistent
make: *** [build/uniphier/release/rot_key.pem] Error 2

The $(ROT_KEY) must depend on $(BUILD_PLAT) so that the build directory
is created before the key.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This is not executable code.  It should be put into .rodata instead
of .text section.

This produces more correct BL1 image when SEPARATE_CODE_AND_RODATA is
defined.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Change-Id: I795ec540942130b5ddc0fa1fd7167f7e1d1ae967
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Uses the xlat tables library's Makefile instead of directly including
the source files in the Uniphier platform port.

Change-Id: I27294dd71bbf9bf3e82973c75324652b037e5bce
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Due to a bug in the Boot ROM, the USB load API turned out not working
as expected.  It is unfixable because the Boot ROM is hard-wired.

Add work around code in TF to bypass the problematic Boot ROM code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

checkpatch.pl from Linux reports tons of coding style errors and
warnings.  I am just fixing under plat/socionext/uniphier/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In a previous patch, the xlat_ctx_t type has been made public.
This patch now makes the *_ctx() APIs public.

Each API now has a *_ctx() variant. Most of them were already implemented
and this patch just makes them public. However, some of them were missing
so this patch introduces them.

Now that all these APIs are public, there's no good reason for splitting
them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c).
Therefore, this patch moves all code into xlat_tables_internal.c and
removes xlat_tables_common.c. It removes it from the library's makefile
as well.

This last change introduces a compatibility break for platform ports
that specifically include the xlat_tables_common.c file instead of
including the library's Makefile. The UniPhier platform makefile has
been updated to now omit this file from the list of source files.

The prototype of mmap_add_region_ctx() has been slightly changed. The
mmap_region_t passed in argument needs to be constant because it gets
called from map_add(), which receives a constant region. The former
implementation of mmap_add() used to cast the const qualifier away,
which is not a good practice.

Also remove init_xlation_table(), which was a sub-function of
init_xlat_tables(). Now there's just init_xlat_tables() (and
init_xlat_tables_ctx()). Both names were too similar, which was
confusing. Besides, now that all the code is in a single file,
it's no longer needed to have 2 functions for that.

Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Currently, ROTPK_NOT_DEPLOYED flag is set in plat_get_rotpk_info().
It is up to users how to retrieve ROTPK if the ROT verification is
desired.  This is not nice.

This commit improves plat_get_rotpk_info() implementation and automates
the ROTPK deployment.  UniPhier platform has no ROTPK storage, so it
should be embedded in BL1/BL2, like ARM_ROTPK_LOCATION=devel_rsa case.
This makes sense because UniPhier platform implements its internal ROM
i.e. BL1 is used as updatable pseudo ROM.

Things work like this:

- ROT_KEY (default: $(BUILD_PLAT)/rot_key.pem) is created if missing.
  Users can override ROT_KEY from the command line if they want to
  use a specific ROT key.

- ROTPK_HASH is generated based on ROT_KEY.

- ROTPK_HASH is included by uniphier_rotpk.S and compiled into BL1/BL2.

- ROT_KEY is input to cert_create tool.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Check the array index before the write.  This issue was found by a
static analysis tool.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add TSP to test BL32 without relying on external projects.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Initial commit for Socionext UniPhier SoC support.  BL1, Bl2, and
BL31 are supported.  Refer to docs/plat/socionext-uniphier.md for
more detais.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>