GitLab

* changes:
  fix(plat/tc0): enable AMU extension
  fix(el3_runtime): fix SVE and AMU extension enablement flags

Add myself as i.MX8 maintainer.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ib037c24a75d42febd79f2eb1ab3b985356dbfb58

* changes:
  feat: disabling non volatile counters in diphda
  feat: adding the diphda platform

The SDEI specification now says that during an SDEI
event handler dispatch the SPSR should be set according
to the TakeException() pseudocode function defined in
the Arm Architecture Reference Manual. This patch sets
the SPSR according to the function given in
ARM DDI 0487F.c page J1-7635

Change-Id: Id2f8f2464fd69c701d81626162827e5c4449b658
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

Recent changes to enable SVE for the secure world have disabled AMU
extension by default in the reset value of CPTR_EL3 register. So the
platform has to enable this extension explicitly.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I7d930d96ec22d7c3db961411370564bece0ce272

If SVE are enabled for both Non-secure and Secure world along with AMU
extension, then it causes the TAM_BIT in CPTR_EL3 to be set upon exit
from bl31. This restricts access to the AMU register set in normal
world. This fix maintains consistency in both TAM_BIT and CPTR_EZ_BIT
by saving and restoring CPTR_EL3 register from EL3 context.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Id76ce1d27ee48bed65eb32392036377716aff087

At this stage of development Non Volatile counters are not implemented
in the Diphda platform.

This commit disables their use during the Trusted Board Boot by
overriding the NV counters get/set functions.

Change-Id: I8dcbebe0281cc4d0837c283ff637e20b850988ef
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>

This commit enables trusted-firmware-a with Trusted Board Boot support
for the Diphda 64-bit platform.

Diphda uses a FIP image located in the flash. The FIP contains the
following components:

- BL2
- BL31
- BL32
- BL32 SPMC manifest
- BL33
- The TBB certificates

The board boot relies on CoT (chain of trust). The trusted-firmware-a
BL2 is extracted from the FIP and verified by the Secure Enclave
processor. BL2 verification relies on the signature area at the
beginning of the BL2 image. This area is needed by the SecureEnclave
bootloader.

Then, the application processor is released from reset and starts by
executing BL2.

BL2 performs the actions described in the trusted-firmware-a TBB design
document.
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Change-Id: Iddb1cb9c2a0324a9635e23821c210ac81dfc305d

* changes:
  fix(drivers/scmi-msg): entry: add weak functions
  feat(drivers/scmi-msg): add power domain protocol
  fix(drivers/scmi-msg): smt: fix build for aarch64

One platform may not implement all the protocols, to avoid build break
when we not include all the protocols, add weak functions.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I1485baa2e8f381cb0eede1a7b93ed10e49934971

Add SCMI power domain protocol, with POWER_STATE_NOTIFY and
POWER_STATE_CHANGE_REQUESTED_NOTIFY not implemented.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ia7c4db57c4c702667f8eaa630c924016e4a8bde0

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Change-Id: I6dbf6d4ea6310c3371ca15d1e7cce249a05af2fb

* changes:
  refactor(plat/arm): use mmio* functions to read/write NVFLAGS registers
  refactor(plat/arm): mark the flash region as read-only
  refactor(plat/arm): update NV flags on image load/authentication failure

* changes:
  fix(plat/marvell/a3k): Fix building uart-images.tgz.bin archive
  refactor(plat/marvell/a3k): Rename *_CFG and *_SIG variables
  refactor(plat/marvell/a3k): Rename DOIMAGETOOL to TBB
  refactor(plat/marvell/a3k): Remove useless DOIMAGEPATH variable
  fix(plat/marvell/a3k): Fix check for external dependences
  fix(plat/marvell/a8k): Add missing build dependency for BLE target
  fix(plat/marvell/a8k): Correctly set include directories for individual targets
  fix(plat/marvell/a8k): Require that MV_DDR_PATH is correctly set

There is a error setting for SPM, so we need to fix this issue.
Signed-off-by: Garmin Chang <garmin.chang@mediatek.com>
Change-Id: I741a5dc1505a831fe48fd5bc3da9904db14c8a57

Neoverse V1 erratum 1940577 is a Cat B erratum, present in some
revisions of the V1 processor core.  The workaround is to insert a
DMB ST before acquire atomic instructions without release semantics.
This issue is present in revisions r0p0 - r1p1  but this workaround
only applies to revisions r1p0 - r1p1, there is no workaround for older
versions.

SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I210ad7d8f31c81b6ac51b028dfbce75a725c11aa

* changes:
  refactor(plat/nxp/lx216x): refine variable definition
  refactor(plat/nxp/lx216x): use common make variables

* changes:
  docs: add mt6795 to deprecated list
  feat(plat/mediatek/mt8195): add DCM driver

Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I2b3aa9bd0c23c360ecee673c68e1b2c92bc6d2be

Neoverse V1 erratum 1791573 is a Cat B erratum present in r0p0 and
r1p0 of the V1 processor core. It is fixed in r1p1.

SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic6f92da4d0b995bd04ca5b1673ffeedaebb71d10

INFO() macro for every call prepends "INFO:   " string. Therefore
current code prints unreadable debug messages:

    "INFO:    set_io_addr_dec 0 result: ctrl(0x3fff3d01) base(0x0)INFO:    "
    "INFO:    Set IO decode window successfully, base(0xc000)INFO:     win_attr(3d) max_dram_win(2) max_remap(0)INFO:     win_offset(8)"

Fix it by calling exactly one INFO() call for one line. After this
change output is:

    "INFO:    set_io_addr_dec 0 result: ctrl(0x3fff3d01) base(0x0) remap(0x0)"
    "INFO:    Set IO decode window successfully, base(0xc000) win_attr(3d) max_dram_win(2) max_remap(0) win_offset(8)"
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6084e64c6f4da6c1929e5300588e4ba2608ca745

For AARCH64, BIT() will make the number as ULL type, let use BIT_32()
here.

And use %zu for size_t print format.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I1dc18d374cd2c6eb83b40b66ed6189dcc6a21728

Change-Id: I65da6ead356e3f4ee47c5a6bf391f65309bafcdd
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

The two existing plat/rockchip code owners seem to be no longer active
in the project and are not responding to reviews. There have been a
couple of small fixup patches[1][2][3] pending for months that couldn't
be checked in for lack of Code-Owner-Review+1 flag. Add myself to the
code owner list to unblock this bottleneck (I have been deeply involved
in the rk3399 port, at least, so I know most of the code reasonably
well).

[1] https://review.trustedfirmware.org/9616
[2] https://review.trustedfirmware.org/9990
[2] https://review.trustedfirmware.org/10415

Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic7b2bb73c35a9bea91ff46ee445a22819d2045d9

For UART secure boot it is required also TIMN image, so pack it into
uart-images.tgz.bin archive which is created by mrvl_uart target.

$(TIMN_IMAGE) and $(TIM_IMAGE) variables are used only for UART images
so their content needs to be initialized from $(TIMN_UART_CFG) and
$(TIM_UART_CFG) config files. And not from $(TIMN_CFG) and $(TIM_CFG) as
it is now because they are not generated during mrvl_uart target. Fix it
to allow building mrvl_uart target before mrvl_flash target.

To match usage of these variables, rename them to $(TIMN_UART_IMAGE) and
$(TIM_UART_IMAGE).

To not complicate rule for building uart-images.tgz.bin archive, set
list of image files into a new $(UART_IMAGES) variable.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I83b980abb4047a3afb3ce3026842e1d873c490bf

For TIM config file use TIM name instead of DOIMAGE and use underscores
to make variable names more readable.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1282ce11f1431c15458a143ae7bfcee85eed2432

Armada 3700 uses external TBB tool for creating images and does not use
internal TF-A doimage tool from tools/marvell/doimage/

Therefore set correct name of variable.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I38a94dca78d483de4c79da597c032e1e5d06d92d