GitLab

Update the Allwinner platform documentation.
Reorder the section, to have the build instructions first, followed by
hints about the installation.

Add some ASCII art about the layout of our virtual memory map, which
uses a non-trivial condensed virtual address space.

Change-Id: Iaaa79b4366012394e15e4c1b26c212b5efb6ed6a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Added GIC600AE FVP model version information.

Change-Id: I15d25fbdb8e09900976d5993032ec049f8db79f2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

ARMv8.6 adds virtual offset registers to support virtualization of the
event counters in EL1 and EL0.  This patch enables support for this
feature in EL3 firmware.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7ee1f3d9f554930bf5ef6f3d492e932e6d95b217

Add blank lines before lists and code example.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I901646e0be74227af983079d0cbe05c6a217fab6

Added a build option 'FVP_GICR_REGION_PROTECTION' to make
redistributor frame of fused/unused cores as read only.

Change-Id: Ie85f86e2465b93321a92a888ce8712a3144e4ccb
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and includes an entropy pool implementation to
avoid dropping any entropy requested from the platform.

Change-Id: I71cadb3cb377a507652eca9e0d68714c973026e9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

docs: marvell: Replace ESPRESSObin-Ultra TF-A build example by full example how to build production release of Marvell firmware image

ESPRESSObin-Ultra TF-A build example was now just a copy+paste of previous
mentioned example. It produced debug binary with custom log level, which
was not described. So rather replace this duplicate build example by a full
example with all steps how to build production release of Marvell firmware
image for EspressoBin with 1GHz CPU and 1GB DDR4 RAM.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ief1b8bc96a3035ebd8421bd68dca5eb5c8d8fd52

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I192acab2a7f42cd80069faeac2d7823a05558dc6

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5310c30051703bbf9f377762a00eb6a8188c6fa1

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I96c2d9d5bc6c69a1a66a29bf586a23375d63ab5a

Reformat list of boards, remove unsupported OcteonTX2 and mention
supported Turris MOX board.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I22cea7f77fd078554c7f0ed4108781626209e563

Default WTMI_IMG value was documented incorrectly. Also WTMI_IMG name may
be misleading as this option does not specify full WTMI image, just a main
loop (e.g. fuse.bin or custom RTOS image) without hardware initialization
code (DDR, CPU and clocks).
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I3de4a27ce2165b962fa628c992fd8f80151efd7c

Information is taken from the post https://lists.denx.de/pipermail/u-boot/2017-July/299351.html

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5f608e135ec56685a3e2b986a52670540d48a4bf

This change separates building of flash and UART images, so it is possible
to build only one of these images. Also this change allows make to build
them in parallel.

Target mrvl_flash now builds only flash image and mrvl_uart only UART
image. This change reflects it also in the documentation.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ie9ce4538d52188dd26d99dfeeb5ad171a5b818f3

This change introduces two new A3720 parameters, CRYPTOPP_LIBDIR and
CRYPTOPP_INCDIR, which can be used to specify directory paths to
pre-compiled Crypto++ library and header files.

When both new parameters are specified then the source code of Crypto++ via
CRYPTOPP_PATH parameter is not needed. And therefore it allows TF-A build
process to use system Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6d440f86153373b11b8d098bb68eb7325e86b20b

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Id5e36b7ba3a840cb3598c580e806b52d8e8dd70f

Marvell finally started providing the latest version of mv-ddr-marvell and
A3700-utils-marvell code in master branch of their git repositories.
Reflect this in build instructions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I08d1189dac60eb2a28335c68f611c1da634106f6

Add maintainer entry for scmi server
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I673d7395a8cea3b553832e330c8a8ce37f8c2a5c

Fix some typos and misspellings in TF-A documentation.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: Id72553ce7b2f0bed9821604fbc8df4d4949909fa

The supported MARVELL_PLATFORM list is updated to include the recently added
a80x0_puzzle platform (IEI Puzzle-M801).

Additionally building instructions are added for the GST ESPRESSObin-Ultra
board (1 GB, DDR4 RAM variant), which has been tested successfully and booted
TF-A on the board.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Change-Id: Ie5724df27c1ee2e8f6a52664520579e872471e93

Cortex N1 erratum 1946160 is a Cat B erratum present in r0p0, r1p0,
r2p0, r3p0, r3p1, r4p0, and r4p1.  The workaround is to insert a DMB ST
before acquire atomic instructions without release semantics.  This
issue is present starting from r0p0 but this workaround applies to
revisions r3p0, r3p1, r4p0, and r4p1, for previous revisions there is no
workaround.

SDEN can be found here:
https://documentation-service.arm.com/static/5fa9304cd8dacc30eded464f

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I36e4d6728c275f1c2477dcee9b351077cf7c53e4

Cortex A78 erratum 1951500 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1.  The workaround is to insert a DMB ST before
acquire atomic instructions without release semantics.  This workaround
works on revisions r1p0 and r1p1, in r0p0 there is no workaround.

SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I47610cee75af6a127ea65edc4d5cffc7e6a2d0a3

Add Lad Prabhakar as the code owner for the newly added
RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Ic9bacaf31d653e1e553fa70043053805f56a2b84

Add Marek Vasut as the code owner for the common code shared by
both Renesas R-Car and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I3c0a402f4663ffcf4d2df408a3ccd4d1a8629b3a

Document the platforms based on RZ/G2 SoC's.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I9ce5b9df3573b1198c5c7be79b5471d54573609a

Move RD-V1 platform to use version of FVP_RD_Daniel from 11.10 build 36
to 11.13 build 10
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I9622c03d342bb780234dec8ffe4ab11d8069acab

Cortex A78 erratum 1941498 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1.  The workaround is to set bit 8 in the ECTLR_EL1
register, there is a small performance cost (<0.5%) for setting this bit.

SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I959cee8e3d46c1b84ff5e4409ce5945e459cc6a9

Introduce a new build option CM3_SYSTEM_RESET for A3700 platform, which,
when enabled, adds code to the PSCI reset handler to try to do system
reset by the WTMI firmware running on the Cortex-M3 secure coprocessor.
(This function is exposed via the mailbox interface.)

The reason is that the Turris MOX board has a HW bug which causes reset
to hang unpredictably. This issue can be solved by putting the board in
a specific state before reset.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I3f60b9f244f334adcd33d6db6a361fbc8b8d209f

Andrew is no longer with TI unfortunately, so stepping up to provide
maintainer for supported TI platforms.
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: Ia1be294631421913bcbc3d346947195cb442d437

Cortex A76 erratum 1946160 is a Cat B erratum, present in some revisions
of the A76 processor core.  The workaround is to insert a DMB ST before
acquire atomic instructions without release semantics.  This issue is
present in revisions r0p0 - r4p1  but this workaround only applies to
revisions r3p0 - r4p1, there is no workaround for older versions.

SDEN can be found here:
https://documentation-service.arm.com/static/5fbb77d7d77dd807b9a80cc1

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ief33779ee76a89ce2649812ae5214b86a139e327

This adds documentation for device tree build flag OPTEE_SP_FW_CONFIG.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ie45f075cf04182701007f87aa0c8912cd567157a

If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.

If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.

This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e

This patch adds a new ARM_ARCH_FEATURE build option
to add support for compiler's feature modifiers.
It has the form '[no]feature+...' and defaults to
'none'. This option translates into compiler option
'-march=armvX[.Y]-a+[no]feature+...'.

Change-Id: I37742f270a898f5d6968e146cbcc04cbf53ef2ad
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Updated the documentation for the FIP generation process using
SP images.

Change-Id: I4df7f379f08f33adba6f5c82904291576972e106
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Updated the list of supported FVP platforms with support for RD-N2 FVP.

Change-Id: I861bbb6d520c20e718f072e118c66dab61fe1386
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

Enable basic support for Neoverse-N2 CPUs.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I498adc2d9fc61ac6e1af8ece131039410872e8ad

Also add example how to build TF-A for A3720 Turris MOX board and also fix
style/indentation issues and information about default values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2dc957307b1b627b403a8d960e85f5ac9e15aee5

Change-Id: I67c9db2fc6d4b83fec2d001745b9305102d4a2ae
Signed-off-by: Chris Kay <chris.kay@arm.com>

This errata workaround did not work as intended and was revised in
subsequent SDEN releases so we are reverting this change.

This is the patch being reverted:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/4686

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I8554c75d7217331c7effd781b5f7f49b781bbebe

This errata workaround did not work as intended and was revised in
subsequent SDEN releases so we are reverting this change.

This is the patch being reverted:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/4684

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I560749a5b55e22fbe49d3f428a8b9545d6bdaaf0