GitLab

The SCP binaries provided in the 17.10 Linaro release (and onwards)
have migrated to the SCMI/SDS protocols. Therefore, the ARM TF should
now use the corresponding drivers by default.

This patch changes the default value of the CSS_USE_SCMI_SDS_DRIVER
build option to 1 for Juno.

Change-Id: Idb7e3c6af582f49e332167a2158703c2d781b437
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Update ULL() macro and instances of ull to comply with MISRA

Clarify comments in xlat tables lib and fixes related to the TLB

TSPD and EHF

SDEI fixes

AMU fixes for Cortex-A75

Refactor SPE/SVE code and fix some bugs in AMUv1 on AArch32

MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes.

This patch resolves this for the ULL() macro by using ULL suffix instead
of the ull suffix.

Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01
Signed-off-by: David Cunado <david.cunado@arm.com>

During the warm boot sequence:

1. The MMU is enabled with the data cache disabled. The MMU table walker
   is set up to access the translation tables as in cacheable memory,
   but its accesses are non-cacheable because SCTLR_EL3.C controls them
   as well.
2. The interconnect is set up and the CPU enters coherency with the
   rest of the system.
3. The data cache is enabled.

If the support for dynamic translation tables is enabled and another CPU
makes changes to a region, the changes may only be present in the data
cache, not in RAM. The CPU that is booting isn't in coherency with the
rest of the system, so the table walker of that CPU isn't either. This
means that it may read old entries from RAM and it may have invalid TLB
entries corresponding to the dynamic mappings.

This is not a problem for the boot code because the mapping is 1:1 and
the regions are static. However, the code that runs after the boot
sequence may need to access the dynamically mapped regions.

This patch invalidates all TLBs during warm boot when the dynamic
translation tables support is enabled to prevent this problem.

Change-Id: I80264802dc0aa1cb3edd77d0b66b91db6961af3d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

FVP: restrict dynamic config to Unix build environment

An earlier patch extended ehf_allow_ns_preemption() API to also register
an error code to offer to Non-secure when a Yielding SMC is preempted by
SDEI interrupt. In TSPD's case, register the error code TSP_PREEMPTED.

Change-Id: I31992b6651f80694e83bc5092b044ef7a3eda690
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

When a Yielding SMC is preempted, it's possible that Non-secure world is
resumed afterwards. In this case, Non-secure execution would find itself
in a state where the SMC has returned. However, the dispatcher might not
get an opportunity to populate the corrected return code for having
been preempted, and therefore the caller of the Yielding SMC cannot
reliably determine whether the SMC had successfully completed or had
been preempted.

To solve this, this patch introduces a new parameter to the
ehf_allow_ns_preemption() API. An SPD, through this parameter, would
provide the expected error code when a Yielding SMC is preempted. EHF
can then populate the specified value in x0 of the Non-secure context so
that the caller of the Yielding SMC correctly identifies the SMC return
as a preemption.

Documentation updates to follow.

Change-Id: Ia9c3f8f03f9d72d81aa235eaae2ee0374b972e1e
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

To make exception handling amongst Secure components, require that SDEI
exception priorities must be assigned the lowest among Secure
priorities. Clarify documentation to this effect.

Change-Id: I92524b7b7e9b3fa06a10c86372bc3c4dd18c00ad
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Currently, when the client attempts to do SDEI_EVENT_COMPLETE or
SDEI_EVENT_COMPLETE_AND_RESUME, the dispatcher pops off the outstanding
dispatch context for sanity check. There are however other checks
following this, which could potentially return failure. If that happens,
by popping the context, the dispatcher has inadvertently discarded a
valid context.

This patch fixes this bug by inspecting (not actually popping) the
outstanding context. The context is popped only after all error checks
are completed.

Change-Id: Ie199f6442f871a8177a8247a0c646543bad76d21
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

This patch restricts building the dynamic config DTBs to the Unix
build environment as the Device Tree compiler may not be available
on other build environments.

Change-Id: Ie690e80010a174300e966240fd977b37561156e0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Change-Id: I61c9fdfda0c0b3c3ec6249519db23602cf4c2100
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This patch also fixes the assumption that the counters are disabled on
the resume path.  This is incorrect as the AMU counters are enabled
early in the CPU reset function before `cpuamu_context_restore()`
runs.

Change-Id: I38a94eb166a523f00de18e86860434ffccff2131
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This patch also fixes `cpuamu_write_cpuamcntenclr_el0()` to use an MSR
instruction instead of an MRS instruction.

Change-Id: Ia6531f64b5ebc60ba432124eaa8d8eaccba40ed0
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Change-Id: I38470528111410cf12b187eb1397d87b812c9416
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

AArch32 uses odd-even pairs when passing 64-bit arguments to
functions.  For example in `amu_group0_cnt_write_internal()` the
second argument is a uint64_t which is passed in r2 and r3.

In `amu_group1_set_evtype_internal()` the value that needs to be
written to the system register is in r1 not in r0.

Change-Id: I20196268fdb1dc9ef6c4ebe61e761fba9623b3f2
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Before suspend the AMU counters should be enabled and after resume
they should be disabled.  Assert that to be consistent with the
AArch64 implementation of `amu_context_{save,restore}()`.

Change-Id: Ia46f77e4062b93afb93721a2890a9b9d2a7f300e
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Implement helpers to test if the core supports SPE/SVE.  We have a
similar helper for AMU and this patch makes all extensions consistent
in their implementation.

Change-Id: I3e6f7522535ca358259ad142550b19fcb883ca67
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

When the MMU is enabled and the translation tables are mapped, data
read/writes to the translation tables are made using the attributes
specified in the translation tables themselves. However, the MMU
performs table walks with the attributes specified in TCR_ELx. They are
completely independent, so special care has to be taken to make sure
that they are the same.

This has to be done manually because it is not practical to have a test
in the code. Such a test would need to know the virtual memory region
that contains the translation tables and check that for all of the
tables the attributes match the ones in TCR_ELx. As the tables may not
even be mapped at all, this isn't a test that can be made generic.

The flags used by enable_mmu_xxx() have been moved to the same header
where the functions are.

Also, some comments in the linker scripts related to the translation
tables have been fixed.

Change-Id: I1754768bffdae75f53561b1c4a5baf043b45a304
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Dynamic Configuration Prototype

Change-Id: I1d85b76af002b8b672fcaeca94939b7420bc8243
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch adds TB_FW_CONFIG for FVP and allows FVP
to select the appropriate HW_CONFIG to include in the
fip. The HW_CONFIG for FVP is selected via `FVP_HW_CONFIG_DTS`
build option. The TB_FW_CONFIG specifies the load address of
HW_CONFIG to BL2. Since currently the load address is different
between AARCH32 and AARCH64, 2 separate TB_FW_CONFIGs are
maintained for the 2 modes.

Change-Id: Ide8581e752dfa900087f5895c775073c841c0daf
Signed-Off-By: Soby Mathew <soby.mathew@arm.com>

The commit 8d2c4977

 changed the interrupt map in `rtsm_ve-motherboard.dtsi`
for the Linux FDT sources to be compatible for FreeBSD. But this also
introduced a regression for FVP AArch32 mode but was undetected till now
because the corresponding DTB was not updated. This patch creates a
new `rtsm_ve-motherboard-aarch32.dtsi` which reverts the change and is
now included by the AArch32 DTS files.

Change-Id: Ibefbbf43a91c8fb890f0fa7a22be91f0227dad34
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

The patch adds the necessary changes to load HW_CONFIG in BL2 for
ARM Platforms :

1. The load address of HW_CONFIG is specified via the `hw_config_addr`
property in TB_FW_CONFIG is loaded by BL1. The `hw_config_max_size`
property defines the maximum size to be expected for the HW_CONFIG.
The `arm_dyn_cfg_helpers.c` and corresponding header implements
utility functions to parse these DT properties defined.
The `arm_dyn_cfg.c` implements wrappers to these helpers to enable
them to be invoked from ARM platform layer.

2. `HW_CONFIG` is added to the `bl2_mem_params_descs[]` array which is
the list of images to be loaded by BL2.

3. The `libfdt` sources are now included when BL2 is built

4. A new helper `populate_next_bl_params_config()` is introduced in
desc_image_load.c to populate the subsequent executable BL images
with the `hw_config` and the corresponding `fw_config` if available.
The `plat_get_next_bl_params()` API for ARM platforms is modified to
invoke this new helper.

5. The implementation of `bl2_early_platform_setup2()` is modified to
consider `arg0` as well in addition to `arg1` passed from BL1.

6. Bump up the BL2 size for Juno to accommodate the inclusion of libfdt.

Change-Id: I80f1554adec41753e0d179a5237364f04fe13a3f
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch modifies the bl1_platform_setup() API to load and authenticate
TB_FW_CONFIG in BL1. The load address of the same is passed on to BL2 in
`arg0` of entrypoint info. The fvp_io_storage.c and arm_io_storage.c also
adds entries corresponding to TB_FW_CONFIG. A helper function
`arm_load_tb_fw_config()` is added to load and authenticate TB_FW_CONFIG
if present.

Change-Id: Ie7bce667b3fad2b1a083bbcbc0a773f9f04254b1
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Change-Id: I9b1cdaf2430a1998a69aa366ea1461224a3d43dc
Co-Authoured-by: Jeenu Viswambharan <Jeenu.Viswambharan@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Change-Id: I147031dea9487dc1976e31ad40c89b221e44edbc
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

The `bl1_init_bl2_mem_layout()` API is now deprecated. The default weak
implementation of `bl1_plat_handle_post_image_load()` calculates the
BL2 memory layout and populates the same in x1(r1). This ensures
compatibility for the deprecated API.

Change-Id: Id44bdc1f572dc42ee6ceef4036b3a46803689315
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch migrates the ARM Standard platforms to the new BL
handover interface. The arm_blx_early_platform_setup() functions
are also modified to take in 4 arguments. The `ARM_BL31_PLAT_PARAM_VAL`
value passed to BL31 from BL2 is now in arg3 in preparation of dynamic
configuration arguments.

Change-Id: I33e8e61325a19e7a7127b1ff203c3b86921bf153
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch introduces a new BL handover interface. It essentially allows
passing 4 arguments between the different BL stages. Effort has been made
so as to be compatible with the previous handover interface. The previous
blx_early_platform_setup() platform API is now deprecated and the new
blx_early_platform_setup2() variant is introduced. The weak compatiblity
implementation for the new API is done in the `plat_bl_common.c` file.
Some of the new arguments in the new API will be reserved for generic
code use when dynamic configuration support is implemented. Otherwise
the other registers are available for platform use.

Change-Id: Ifddfe2ea8e32497fe1beb565cac155ad9d50d404
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch adds image IDs to `hw_config` and `tb_fw_config` and
includes them in the default Chain Of Trust (CoT).

Change-Id: If7bb3e9be8a5e48be76614b35bf43d58fc7fed12
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch updates the `fiptool` and `cert_create` for the
`hw_config` and `tb_fw_config` dynamic configuration files.
The necessary UUIDs and OIDs are assigned to these files and
the `cert_create` is updated to generate appropriate hashes
and include them in the "Trusted Boot FW Certificate". The
`fiptool` is updated to allow the configs to be specified
via cmdline and included in the generated FIP.

Change-Id: I940e751a49621ae681d14e162aa1f5697eb0cb15
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch makes some minor changes to `MAKE_DTBS` make macro
and adds `dtbs` target to the `all` make target.

Change-Id: I1c5b4a603ada31d2dac2ed73da9ff707b410dd11
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch adds an argument to bl1_plat_post/pre_image_load() APIs
to make it more future proof. The default implementation of
these are moved to `plat_bl1_common.c` file.

These APIs are now invoked appropriately in the FWU code path prior
to or post image loading by BL1 and are not restricted
to LOAD_IMAGE_V2.

The patch also reorganizes some common platform files. The previous
`plat_bl2_el3_common.c` and `platform_helpers_default.c` files are
merged into a new `plat_bl_common.c` file.

NOTE: The addition of an argument to the above mentioned platform APIs
is not expected to have a great impact because these APIs were only
recently added and are unlikely to be used.

Change-Id: I0519caaee0f774dd33638ff63a2e597ea178c453
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Ensure the correct execution of TLBI instructions

Make all build results depend on all makefiles