GitLab

Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Id610f7e4398e799a2fbd74861274fd684c32db53

This patch adds setting MDCR_EL3.MCCD in 'el3_arch_init_common'
macro to disable cycle counting by PMCCNTR_EL0 in EL3 when
FEAT_PMUv3p7 is implemented. This fixes failing test
'Leak PMU CYCLE counter values from EL3 on PSCI suspend SMC'
on FVP models with 'has_v8_7_pmu_extension' parameter set to
1 or 2.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I2ad3ef501b31ee11306f76cb5a61032ecfd0fbda

Since there is a secure and non-secure version of the timer registers
there is no need to preserve their context in EL3.
With that, following registers were removed from EL3 save/restore
routine:
	cnthps_ctl_el2
	cnthps_tval_el2
	cnthps_cval_el2
	cnthvs_ctl_el2
	cnthvs_tval_el2
	cnthvs_cval_el2
	cnthp_ctl_el2
	cnthp_cval_el2
	cnthp_tval_el2
	cnthv_ctl_el2
	cnthv_cval_el2
	cnthv_tval_el2
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I6e2fc09c74a7375c4fccc11f12af4e39e6dc616b

ARMv8.6 adds virtual offset registers to support virtualization of the
event counters in EL1 and EL0.  This patch enables support for this
feature in EL3 firmware.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7ee1f3d9f554930bf5ef6f3d492e932e6d95b217

For SoCs which do not implement RAS, use DSB as a barrier to
synchronize pending external aborts at the entry and exit of
exception handlers. This is needed to isolate the SErrors to
appropriate context.

However, this introduces an unintended side effect as discussed
in the https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3440


A summary of the side effect and a quick workaround is provided as
part of this patch and summarized here:

The explicit DSB at the entry of various exception vectors in BL31
for handling exceptions from lower ELs can inadvertently trigger an
SError exception in EL3 due to pending asyncrhonouus aborts in lower
ELs. This will end up being handled by serror_sp_elx in EL3 which will
ultimately panic and die.

The way to workaround is to update a flag to indicate if the exception
truly came from EL3. This flag is allocated in the cpu_context
structure. This is not a bullet proof solution to the problem at hand
because we assume the instructions following "isb" that help to update
the flag (lines 100-102 & 139-141) execute without causing further
exceptions.

Change-Id: I4d345b07d746a727459435ddd6abb37fda24a9bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

This patch provides the following changes:
- Adds definition for FEAT_MTE3 value in ID_AA64PFR1_EL1 register
- Enables Memory Tagging Extension for FEAT_MTE3.

Change-Id: I735988575466fdc083892ec12c1aee89b5faa472
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Include EL2 registers related to SPE in EL2 context save/restore
routines if architecture supports it and platform wants to use these
features in Secure world.

Change-Id: Ie01a2c38fa5f6c907276eddec120fdfb222561a6
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

Include EL2 registers related to Nested Virtualization in EL2 context
save/restore routines if architecture supports it and platform wants to
use these features in Secure world.

Change-Id: If006ab83bbc2576488686f5ffdff88b91adced5c
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

AArch64-only platforms do not implement AArch32 at EL1 and higher ELs.
In such cases the build option CTX_INCLUDE_AARCH32_REGS is set to 0.
So don't save/restore aarch32 system registers in el2_sysregs_context
save/restore routines if CTX_INCLUDE_AARCH32_REGS is set to 0.

Change-Id: I229cdd46136c4b4bc9623b02eb444d904e09ce5a
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:

    bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
    The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
    0x3c0U" (32 bits) is less that the right hand operand
    "18446744073709547519ULL" (64 bits).

This also resolves MISRA defects such as:

    bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
    In the expression "3U << 20", shifting more than 7 bits, the number
    of bits in the essential type of the left expression, "3U", is
    not allowed.

Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.

This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,

    92407e73        and     x19, x19, #0xffffffff

from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.

The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.

Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Make this more scalable by explicitly checking internal and hardware
states at run_time
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I1c6ed1c1badb3538a93bff3ac5b5189b59cccfa1

As per latest mailing communication [1], we decided to
update AT speculative workaround implementation in order to
disable page table walk for lower ELs(EL1 or EL0) immediately
after context switching to EL3 from lower ELs.

Previous implementation of AT speculative workaround is available
here: 45aecff0

AT speculative workaround is updated as below:
1. Avoid saving and restoring of SCTLR and TCR registers for EL1
   in context save and restore routine respectively.
2. On EL3 entry, save SCTLR and TCR registers for EL1.
3. On EL3 entry, update EL1 system registers to disable stage 1
   page table walk for lower ELs (EL1 and EL0) and enable EL1
   MMU.
4. On EL3 exit, restore SCTLR and TCR registers for EL1 which
   are saved in step 2.

[1]:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-July/000586.html



Change-Id: Iee8de16f81dc970a8f492726f2ddd57e7bd9ffb5
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

SCTLR and TCR registers of EL1 plays role in enabling/disabling of
page table walk for lower ELs (EL0 and EL1).
Hence re-arranged EL1 context offsets to have SCTLR and TCR registers
values one after another in the stack so that these registers values
can be saved and restored using stp and ldp instruction respectively.

Change-Id: Iaa28fd9eba82a60932b6b6d85ec8857a9acd5f8b
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

As per latest mailing communication [1], we decided
not to update SCTLR and TCR registers in EL1 and EL2 context
restore routine when AT speculative workaround is enabled
hence reverted the changes done as part of this commit: 45aecff0.

[1]:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-July/000586.html



Change-Id: I8c5f31d81fcd53770a610e302a5005d98772b71f
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

This patch adds a build config 'RAS_TRAP_LOWER_EL_ERR_ACCESS' to set
SCR_EL3.TERR during CPU boot. This bit enables trapping RAS register
accesses from EL1 or EL2 to EL3.

RAS_TRAP_LOWER_EL_ERR_ACCESS is disabled by default.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ifb0fb0afedea7dd2a29a0b0491a1161ecd241438

Enhanced Counter Virtualization, ECV, is an architecture extension introduced
in ARMv8.6. This extension allows the hypervisor, at EL2, to setup
self-synchronizing views of the timers for it's EL1 Guests. This patch pokes the
control register to enable this extension when booting a hypervisor at EL2.

Change-Id: I4e929ecdf400cea17eff1de5cf8704aa7e40973d
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

The Fine Grained Traps (FGT) architecture extension was added to aarch64 in
ARMv8.6. This extension primarily allows hypervisors, at EL2, to trap specific
instructions in a more fine grained manner, with an enable bit for each
instruction. This patch adds support for this extension by enabling the
extension when booting an hypervisor at EL2.

Change-Id: Idb9013ed118b6a1b7b76287237096de992ca4da3
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

This patch enables the v8.6 extension to add a delay before WFE traps
are taken. A weak hook plat_arm_set_twedel_scr_el3 has been added in
plat/common/aarch64/plat_common.c that disables this feature by default
but platform-specific code can override it when needed.

The only hook provided sets the TWED fields in SCR_EL3, there are similar
fields in HCR_EL2, SCTLR_EL2, and SCTLR_EL1 to control WFE trap delays in
lower ELs but these should be configured by code running at EL2 and/or EL1
depending on the platform configuration and is outside the scope of TF-A.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I0a9bb814205efeab693a3d0a0623e62144abba2d

Removing FPEXC32_EL2 from the register save/restore routine for EL2
registers since it is already a part of save/restore routine for
fpregs.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I5ed45fdbf7c8efa8dcfcd96586328d4f6b256bc4

During context switching from higher EL (EL2 or higher)
to lower EL can cause incorrect translation in TLB due to
speculative execution of AT instruction using out-of-context
translation regime.

Workaround is implemented as below during EL's (EL1 or EL2)
"context_restore" operation:
1. Disable page table walk using SCTLR.M and TCR.EPD0 & EPD1
   bits for EL1 or EL2 (stage1 and stage2 disabled)
2. Save all system registers except TCR and SCTLR (for EL1 and EL2)
3. Do memory barrier operation (isb) to ensure all
   system register writes are done.
4. Restore TCR and SCTLR registers (for EL1 and EL2)

Errata details are available for various CPUs as below:
Cortex-A76: 1165522
Cortex-A72: 1319367
Cortex-A57: 1319537
Cortex-A55: 1530923
Cortex-A53: 1530924

More details can be found in mail-chain:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-April/000445.html



Currently, Workaround is implemented as build option which is default
disabled.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If8545e61f782cb0c2dda7ffbaf50681c825bd2f0

TPIDR_EL2 is missing from the EL2 state register save/restore
sequence. This patch adds it to the context save restore routines.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I35fc5ee82f97b72bcedac57c791312e7b3a45251

This patch adds EL2 registers that are supported up to ARMv8.6.
ARM_ARCH_MINOR has to specified to enable save/restore routine.

Note: Following registers are still not covered in save/restore.
 * AMEVCNTVOFF0<n>_EL2
 * AMEVCNTVOFF1<n>_EL2
 * ICH_AP0R<n>_EL2
 * ICH_AP1R<n>_EL2
 * ICH_LR<n>_EL2

Change-Id: I4813f3243e56e21cb297b31ef549a4b38d4876e1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0

Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

This patch removes unnecessary header file includes
discovered by Coverity HFA option.

Change-Id: I2827c37c1c24866c87db0e206e681900545925d4
Signed-off-by: Zelalem <zelalem.aweke@arm.com>

The Secure Configuration Register is 64-bits in AArch64 and 32-bits in
AArch32. Use u_register_t instead of unsigned int to reflect this.

Change-Id: I51b69467baba36bf0cfaec2595dc8837b1566934
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Since BL31 PROGBITS and BL31 NOBITS sections are going to be
in non-adjacent memory regions, potentially far from each other,
some fixes are needed to support it completely.

1. adr instruction only allows computing the effective address
of a location only within 1MB range of the PC. However, adrp
instruction together with an add permits position independent
address of any location with 4GB range of PC.

2. Since BL31 _RW_END_ marks the end of BL31 image, care must be
taken that it is aligned to page size since we map this memory
region in BL31 using xlat_v2 lib utils which mandate alignment of
image size to page granularity.

Change-Id: I3451cc030d03cb2032db3cc088f0c0e2c84bffda
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

This reverts commit 76d84cbc.

Change-Id: I867af7af3d9f5e568101f79b9ebea578e5cb2a4b

Even though ERET always causes a jump to another address, aarch64 CPUs
speculatively execute following instructions as if the ERET
instruction was not a jump instruction.
The speculative execution does not cross privilege-levels (to the jump
target as one would expect), but it continues on the kernel privilege
level as if the ERET instruction did not change the control flow -
thus execution anything that is accidentally linked after the ERET
instruction. Later, the results of this speculative execution are
always architecturally discarded, however they can leak data using
microarchitectural side channels. This speculative execution is very
reliable (seems to be unconditional) and it manages to complete even
relatively performance-heavy operations (e.g. multiple dependent
fetches from uncached memory).

This was fixed in Linux, FreeBSD, OpenBSD and Optee OS:
https://github.com/torvalds/linux/commit/679db70801da9fda91d26caf13bf5b5ccc74e8e8
https://github.com/freebsd/freebsd/commit/29fb48ace4186a41c409fde52bcf4216e9e50b61
https://github.com/openbsd/src/commit/3a08873ece1cb28ace89fd65e8f3c1375cc98de2
https://github.com/OP-TEE/optee_os/commit/abfd092aa19f9c0251e3d5551e2d68a9ebcfec8a

It is demonstrated in a SafeSide example:
https://github.com/google/safeside/blob/master/demos/eret_hvc_smc_wrapper.cc
https://github.com/google/safeside/blob/master/kernel_modules/kmod_eret_hvc_smc/eret_hvc_smc_module.c

Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Change-Id: Iead39b0b9fb4b8d8b5609daaa8be81497ba63a0f

Since BL31 PROGBITS and BL31 NOBITS sections are going to be
in non-adjacent memory regions, potentially far from each other,
some fixes are needed to support it completely.

1. adr instruction only allows computing the effective address
of a location only within 1MB range of the PC. However, adrp
instruction together with an add permits position independent
address of any location with 4GB range of PC.

2. Since BL31 _RW_END_ marks the end of BL31 image, care must be
taken that it is aligned to page size since we map this memory
region in BL31 using xlat_v2 lib utils which mandate alignment of
image size to page granularity.

Change-Id: Ic745c5a130fe4239fa2742142d083b2bdc4e8b85
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

EA handlers for exceptions taken from lower ELs at the end invokes
el3_exit function. However there was a bug with sp maintenance which
resulted in el3_exit setting runtime stack to context. This in turn
caused memory corruption on consecutive EL3 entries.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I0424245c27c369c864506f4baa719968890ce659

Check that entry point information requesting S-EL2
has AArch64 as an execution state during context setup.
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I447263692fed6e55c1b076913e6eb73b1ea735b7

This patch adds support for enabling S-EL2 if this EL is specified in the entry
point information being used to initialise a secure context. It is the caller's
responsibility to check if S-EL2 is available on the system before requesting
this EL through the entry point information.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Change-Id: I2752964f078ab528b2e80de71c7d2f35e60569e1

assert() calls are removed in release builds, and if that assert call is
the only use of a variable, an unused variable warning will be triggered
in a release build. This patch fixes this problem when
CTX_INCLUDE_MTE_REGS by not using an intermediate variable to store the
results of get_armv8_5_mte_support().

Change-Id: I529e10ec0b2c8650d2c3ab52c4f0cecc0b3a670e
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

AArch64 System register SCTLR_EL1[31:0] is architecturally mapped
to AArch32 System register SCTLR[31:0]
AArch64 System register ACTLR_EL1[31:0] is architecturally mapped
to AArch32 System register ACTLR[31:0].

`u_register_t` should be used when it's important to store the
contents of a register in its native size
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I0055422f8cc0454405e011f53c1c4ddcaceb5779

This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
  of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
  which returns 128-bit value and uses Generic timer physical counter
  value to increase the randomness of the generated key.
  The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
  generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
  pauth_disable_el1()` and `pauth_disable_el3()` functions disable
  PAuth for EL1 and EL3 respectively;
  `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
  cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
  `save_gp_registers()` and `pauth_context_save()`;
  `restore_gp_pauth_registers()` replaces `pauth_context_restore()`
  and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
  code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
  for 12 uint64_t PAuth registers instead of 10 by removal of macro
  CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
  and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
  in `msr	spsel`  instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.

Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds support for the new Memory Tagging Extension arriving in
ARMv8.5. MTE support is now enabled by default on systems that support
at EL0. To enable it at ELx for both the non-secure and the secure
world, the compiler flag CTX_INCLUDE_MTE_REGS includes register saving
and restoring when necessary in order to prevent register leakage
between the worlds.

Change-Id: I2d4ea993d6b11654ea0d4757d00ca20d23acf36c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.

Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.

Change-Id: I9ef64460beaba15e9a9c20ab02da4fb2208b6f7d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Instruction key A was incorrectly restored in the instruction key B
registers.

Change-Id: I4cb81ac72180442c077898509cb696c9d992eda3
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>