GitLab

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

Define Qemu AArch32 implementation for some platform functions
(core position, secondary boot cores, crash console). These are
derived from the AArch64 implementation.

BL31 on Qemu is needed only for ARMv8 and later. On ARMv7, BL32 is
the first executable image after BL2.

Support SP_MIN and OP-TEE as BL32: create a sp_min make script target
in Qemu, define mapping for IMAGE_BL32

Minor fix Qemu return value type for plat_get_ns_image_entrypoint().

Qemu model for the Cortex-A15 does not support the virtualization
extension although the core expects it. To overcome the issue, Qemu
ARMv7 configuration set ARCH_SUPPORTS_VIRTUALIZATION to 0.

Add missing AArch32 assembly macro arm_print_gic_regs from ARM platform
used by the Qemu platform.

Qemu Cortex-A15 model integrates a single cluster with up to 4 cores.

Change-Id: I65b44399071d6f5aa40d5183be11422b9ee9ca15
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

Looks like this is requirement in the pre-merge static analysis.

misra_violation: [Required] MISRA C-2012 Rule 7.2 violation:
Unsigned constants must be declared with U or u suffix.

Adding ULL as requested.  I used ULL() macros for BL*_{BASE,LIMIT}
because they are referenced from linker scripts.
Requested-by: David Cunado <david.cunado@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, the xlat region of the on-chip SRAM is always allocated
for all BL images.

The access to the on-chip SRAM is necessary for loading images from
a USB memory device (i.e. when updating firmware), so unneeded for
the usual boot procedure.

To avoid this waste, allocate the xlat region dynamically only for
BL2, and only when it is necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 247fc043

 ("uniphier: switch to BL2-AT-EL3 and remove BL1
support") accidentally changed the location of BL31 and BL32.  The
new memory map overlaps with the audio DSP images, also gives impact
to OP-TEE.  They are both out of control of ARM Trusted Firmware, so
not easy to change.  This commit restores the image layout that was
originally used prior to the BL2-AT-EL3 migration.
Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Allow to handle GZIP-compressed images by giving FIP_GZIP=1 from the
command line.

- Images are GZIP-compressed, then packed into FIP.  If Trusted Board
  Boot is enabled, certificates are generated based on the compressed
  images.

- GZIP decompressor is linked into BL2 to decompress images at
  run-time.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In the next commit, I will have more usecases to get struct image_info
from image ID.  It is better to make a helper function at a different
layer.  I do not need the current uniphier_image_descs_fixup() since
the code is small enough to be squashed into the caller side.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Just like bl2_, add pre/post image load handlers for BL1.  No argument
is needed since BL2 is the only image loaded by BL1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

There are cases where we need to manipulate image information before
the load.  For example, for decompressing data, we cannot load the
compressed images to their final destination.  Instead, we need to
load them to the temporary buffer for the decompressor.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

When we add a new callback, we need to duplicate fallbacks among
plat/common/{aarch32,aarch64}/platform_helpers.S  This is tedious.

I created a new C file, then moved 3 functions:
  plat_error_handler
  bl2_plat_preload_setup
  plat_try_next_boot_source

They are called from C, so I do not see a good reason to implement
them in assembly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In the next commit, I need the image name in lowercase because
output files are generally named in lowercase.

Unfortunately, TOOL_ADD_IMG takes the first argument in uppercase
since we generally use uppercase Make variables.

make_helpers/build_macros.mk provides 'uppercase' macro to convert
a string into uppercase, but 'lowercase' does not exist.  We can
implement it if we like, but it would be more straightforward to
change the argument of TOOL_ADD_IMG.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Now FIP_ADD_IMG takes care of both fiptool and cert_create
symmetrically.  Rename it so that it matches the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The build system supports generating two FIP images, fip and fwu_fip.
Accordingly, we have similar build macros.

   FIP_ADD_PAYLOAD   <-->  FWU_FIP_ADD_PAYLOAD
   CERT_ADD_CMD_OPT  <-->  FWU_CERT_ADD_CMD_OPT
   FIP_ADD_IMG       <-->  FWU_FIP_ADD_IMG

The duplicated code increases the maintenance burden.  Also, the build
rule of BL2U looks clumsy - we want to call MAKE_BL to compile it from
source files, but we want to put it in fwu_fip.  We can not do it in a
single macro call since the current MAKE_BL does not support fwu_fip.

To refactor those in a clean way is to support one more argument to
specify the FIP prefix.  If it is empty, the images are targeted to
fip, whereas if the argument is "FWU_", targeted to fwu_fip.

The build macros prefixed with FWU_ go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Coverity scan done for the coreboot project found the issue:
Coverity (*** CID 1385418: Memory - illegal accesses (OVERRUN))
Coverity (*** CID 1385419: Memory - corruptions  (OVERRUN))

Fix the Converity error issue with store_cru[] loop needs to be one
element bigger.

Fixes: ARM-software/tf-issues#544

Change-Id: I420f0a660b24baaa5fc5e78fca242cf750c9bbc7
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

Change-Id: Ib67b841ab621ca1ace3280e44cf3e1d83052cb73
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This patch maps the devices in the first GB of the system address map
on the FVP into the S-EL1&0 translation regime when SPM support is
enabled. This grants the Secure Partition access to the devices in
this region, for example the memory-mapped Generic Timer device.

Change-Id: I3aeea65f859ecbe83efde2acee20c55500c451bc
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

`assert(e)` was used in place of `if (e) ERROR()` when sec_protect()
was ported from hikey fork so the logic should have been reversed.

Fixes: 3d5d9f5a ("hikey: configure the top 16MB of DRAM as secure")
Fixes: 52988b38

 ("hikey: configure 4 MB of secure DRAM for OP-TEE
Secure Data Path")
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Victor Chong <victor.chong@linaro.org>

This disables the redistributor before either of the pwr_dm_suspend
functions are called. This is because the rdist save code in the
rk3399 rockchip_soc_sys_pwr_dm_suspend function requires that each
redistributor be disabled before saving state.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

UniPhier platform implements non-TF boot ROM.  Prior to the BL2-AT-EL3
support, BL1 (worked as a pseudo ROM) was needed just for ensuring BL2
is entered at EL1-S.  Now, this platform is able to avoid this waste.

Enable the BL2_AT_EL3 option, and remove BL1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The warm boot mailbox code is compiled if PROGRAMMABLE_RESET_ADDRESS
is disabled.

The warm boot mailbox is useless for UniPhier SoC family because BL1
is not the first image.  The UniPhier platform implements non-TF ROM,
then BL1 works as a pseudo ROM, so it is never executed in the warm
boot.

The reset vector address is not actually programmable for UniPhier
platform, but it should not hurt to enable PROGRAMMABLE_RESET_ADDRESS
to disable the mailbox and remove pointless plat_get_my_entrypoint.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Update the memory firewall configuration to reserve 4 MB of secure RAM
for use by the kernel and OP-TEE as the Secure Data Path pool.
Note that this address range (0x3E800000 - 0x3EC00000) falls in the
range already set aside by UEFI (which reserves the upper 32 MB of the
1GB DRAM for OP-TEE [1]) and was previously unused.

[1] https://github.com/96boards-hikey/edk2/blob/hikey/HisiPkg/HiKeyPkg/Library/HiKeyLib/HiKeyMem.c#L44

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Victor Chong <victor.chong@linaro.org>

DRAM region 0x3f000000 - 0x3fffffff is reserved for OP-TEE and should
therefore be accessible only from secure world.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Victor Chong <victor.chong@linaro.org>

This adds calls to the GICv3 save/restore functions for the GIC
distributor and redistributor.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

We were looping for MAX_WAIT_COUNT in several places without any
delays, so this adds the delays to make those loops more predictable.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

The code was accidentally restoring the QOS on suspend and saving the
QOS on resume. This is the opposite of what we want.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

This brings ATF into line with the kernel on the timeout for power
domains turning on. We could actually timeout (when we shouldn't) on
resume when turning power domains on. The guaranteed maximum delay is
now 10ms.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>

The `override ERROR_DEPRECATION = 1` setting in uniphier platform
makes deprecation of API difficult. Hence removing the same. This
flag should be specified on the command line if needed.

Change-Id: I8c82d8d13944e450a8cd636de3326137c04d7560
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

Let bl1 and bl2 have the ability to load images from emmc instead of
dram (mmap).
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

When some interrupts are configured as group 0 in GICv2, these
interrupts trigger FIQ signal; this results in the Linux kernel panic
by reporting log: "Bad mode in FIQ handler detected on CPU0, code
0x00000000 -- Unknown/Uncategorized".  Unfortunately from kernel side it
has no permission to read the GIC register for group 0 interrupts so we
have no chance to get to know which interrupt is configured as secure
interrupt and cause the kernel panic.

For upper reason, this commit enables FIQ exception handling for
SPD_none case.  If the system has not enabled SPD the FIQ interrupt is
trapped into EL3 and the FIQ handler can report the interrupt number so
we can easily narrow down which FIQ introduce unexpected interrupt.
After enable SPD we can rely on SPD interrupt route model to handle FIQ.
Signed-off-by: Leo Yan <leo.yan@linaro.org>

This patch changes all Rockchip platforms to use the new
MULTI_CONSOLE_API. The platform-specific plat_crash_console
implementations are removed so that the platform can use the ones from
the common platform code instead.

Also change the registers used in plat_crash_print_regs. The existing
use of x16 and x17 has always been illegal, since those registers are
reserved for use by the linker as a temporary scratch registers in
intra-procedure-call veneers and can never be expected to maintain their
values across a function call.

Change-Id: I8249424150be8d5543ed4af93b56756795a5288f
Signed-off-by: Julius Werner <jwerner@chromium.org>

This patch changes all Rockchip platforms to initialize the serial
console with information supplied by coreboot rather than hardcoded
base address and divisor values if BL31 is run on top of coreboot.
Moving the BL2-to-BL31 parameter parsing as early as possible to ensure
that the console is available for all following code.

Also update the Rockchip platform to use MULTI_CONSOLE_API.

Change-Id: I670d350fa2f8b8133539f91ac14977ab47db60d9
Signed-off-by: Julius Werner <jwerner@chromium.org>

This patch expands the weak stubs for the plat_crash_console_xxx
functions in common platform code to use the new console API for crash
output. This should make crash console output "just work" for most cases
without the need for the platform to explicitly set up a crash console.
For cases where the normal console framework doesn't work (e.g. very
early crashes, before the platform can register any consoles), platforms
are still able to override the functions just like before.

This feature requires the MULTI_CONSOLE_API compile-time flag to work.
For builds which don't have it set, this patch has no practical effect.

Change-Id: I80dd161cb43f9db59a0bad2dae33c6560cfac584
Signed-off-by: Julius Werner <jwerner@chromium.org>

This patch modifies the makefiles to avoid the definition
of BL1_SOURCES and BL2_SOURCES in the tbbr makefiles, and
it lets to the platform makefiles to define them if they
actually need these images. In the case of BL2_AT_EL3
BL1 will not be needed usually because the Boot ROM will
jump directly to BL2.

Change-Id: Ib6845a260633a22a646088629bcd7387fe35dcf9
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

This patch add supports for the new API added for BL2 at EL3 for
FVP. We don't have a non-TF Boot ROM for FVP, but this option can be
tested setting specific parameters in the model.

The bl2 image is loaded directly in memory instead of being loaded
by a non-TF Boot ROM and the reset address is changed:

	--data cluster0.cpu0=bl2.bin@0x4001000
	-C cluster0.cpu0.RVBAR=0x4001000

These parameters mean that in the cold boot path the processor will
jump to BL2 again. For this reason, BL2 is loaded in dram in this
case, to avoid other images reclaiming BL2 memory.

Change-Id: Ieb2ff8535a9e67ccebcd8c2212cad366e7776422
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL
stages without need for BL1.  This is not currently possible because
BL2 executes at S-EL1 and cannot jump straight to EL3.

Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

At early time, the CPU CA73 retention state has been supported on
Hikey960.  Later we found the system has the hang issue and for
resolving this issue Hisilicon released new MCU firmware, but
unfortunately the new MCU firmware has side effect and results in the
CA73 CPU cannot really enter retention state and roll back to WFI state.

After discussion we cannot see the possibility to enable CA73 retention
state anymore on Hikey960, based on this conclusion we should remove
this state supporting from ARM-TF and roll back to WFI state only.  We
will commit one patch to remove CA73 CPU retention state in kernel DT
binding as well.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Kevin Wang <jean.wangtao@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>