GitLab

In AArch64, depending on the granularity of the translation tables,
level 0 and/or level 1 of the translation tables may not support block
descriptors, only table descriptors.

This patch introduces a check to make sure that, even if theoretically
it could be possible to create a block descriptor to map a big memory
region, a new subtable will be created to describe its mapping.

Change-Id: Ieb9c302206bfa33fbaf0cdc6a5a82516d32ae2a7
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The now deprecated ADDR_SPACE_SIZE has been replaced by the two
defines PLAT_PHY_ADDR_SPACE_SIZE and PLAT_VIRT_ADDR_SPACE_SIZE.

Change-Id: I027a2f02f47ab2f679b8979a6dbfb0f08270a1a4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Added the definitions `PLAT_PHY_ADDR_SPACE_SIZE` and
`PLAT_VIRT_ADDR_SPACE_SIZE` which specify respectively the physical
and virtual address space size a platform can use.

`ADDR_SPACE_SIZE` is now deprecated. To maintain compatibility, if any
of the previous defines aren't present, the value of `ADDR_SPACE_SIZE`
will be used instead.

For AArch64, register ID_AA64MMFR0_EL1 is checked to calculate the
max PA supported by the hardware and to verify that the previously
mentioned definition is valid. For AArch32, a 40 bit physical
address space is considered.

Added asserts to check for overflows.

Porting guide updated.

Change-Id: Ie8ce1da5967993f0c94dbd4eb9841fc03d5ef8d6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Each translation table level entry can only map a given virtual
address onto physical addresses of the same granularity. For example,
with the current configuration, a level 2 entry maps blocks of 2 MB,
so the physical address must be aligned to 2 MB. If the address is not
aligned, the MMU will just ignore the lower bits.

This patch adds an assertion to make sure that physical addresses are
always aligned to the correct boundary.

Change-Id: I0ab43df71829d45cdbe323301b3053e08ca99c2c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Define and use no_ret macro where no return is expected

Various fiptool enhancements and bug fixes

Reset EL2 and EL3 configurable controls

AArch32: Miscellaneous fixes in the AArch32 code

Optimize cache flush when authenticating images

Introduce SCP power management abstraction

The capabilities exposed by the PSCI generic layer depends on the hooks
populated by the platform in `plat_arm_psci_pm_ops`. Currently ARM
Standard platforms statically define this structure. However, some
platforms may want to modify the hooks at runtime before registering
them with the generic layer.

This patch introduces a new ARM platform layer API
`plat_arm_psci_override_pm_ops` which allows the platform to probe
the power controller and modify `plat_arm_psci_pm_ops` if required.
Consequently, 'plat_arm_psci_pm_ops' is no longer qualified as
`const` on ARM Standard platforms.

Change-Id: I7dbb44b7bd36c20ec14ded5ee45a96816ca2ab9d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch introduces an additional layer of abstraction between
CSS power management hooks and the SCPI driver. A new set of APIs
are introduced in order to abstract out power management operations
from underlying communication mechanism with the SCP.

The SCPI and the associated MHU drivers are moved into a `drivers`
folder in CSS. The new SCP communication abstraction layer is added
in the `drivers/scp` folder. The existing CSS power management
uses the new APIs to reflect this abstraction.

Change-Id: I7d775129fc0558e9703c2724523fb8f0a916838c
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

There are many instances in ARM Trusted Firmware where control is
transferred to functions from which return isn't expected. Such jumps
are made using 'bl' instruction to provide the callee with the location
from which it was jumped to. Additionally, debuggers infer the caller by
examining where 'lr' register points to. If a 'bl' of the nature
described above falls at the end of an assembly function, 'lr' will be
left pointing to a location outside of the function range. This misleads
the debugger back trace.

This patch defines a 'no_ret' macro to be used when jumping to functions
from which return isn't expected. The macro ensures to use 'bl'
instruction for the jump, and also, for debug builds, places a 'nop'
instruction immediately thereafter (unless instructed otherwise) so as
to leave 'lr' pointing within the function range.

Change-Id: Ib34c69fc09197cfd57bc06e147cc8252910e01b0
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Change-Id: Ie3e43e9f7d31df40a5997047b9bddec0a06fd47f
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Change-Id: I18a4327e41fc090dcea9a647f7673182ca0ed1d9
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Change-Id: I62c1a636eb0d9f73fa3a6356e32b5a44f268d421
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Additionally, remove the -o option for the create command
as it is not supported.

Change-Id: I27993a6fc5e3b0b9710e2ec5322e4296bc87d0df
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch resets EL2 and EL3 registers that have architecturally
UNKNOWN values on reset and that also provide EL2/EL3 configuration
and trap controls.

Specifically, the EL2 physical timer is disabled to prevent timer
interrups into EL2 - CNTHP_CTL_EL2 and CNTHP_CTL for AArch64 and AArch32,
respectively.

Additionally, for AArch64, HSTR_EL2 is reset to avoid unexpected traps of
non-secure access to certain system registers at EL1 or lower.

For AArch32, the patch also reverts the reset to SDCR which was
incorrectly added in a previous change.

Change-Id: If00eaa23afa7dd36a922265194ccd6223187414f
Signed-off-by: David Cunado <david.cunado@arm.com>

For C99 compliance, changed the unsigned char/short bitfield to unsigned int bitfields

C99 restricts bitfields type is signed and unsigned integer or _Bool.
See section 6.7.2.1 Structure and union specifiers.
"A bit-field shall have a type that is a qualified or unqualified version
 of _Bool, signed int, unsigned int, or some other implementation-defined type."

Since the compiler packs bitfields anyways, actual data layout in the structure is unaffected.
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>

This patch makes following miscellaneous fixes:
* pl011_console.S: Fixed the bit mask used to check if the
  transmit FIFO is full or empty.
* smcc_macros.S: Added `_fsxc` suffix while updating the SPSR.
  By default the assembler assumes `_fc` suffix which does not
  update all the fields in SPSR. By adding `_fsxc` suffix all
  the fields gets updated.
* platform_helpers.S: Removed the weak definition for
  `plat_my_core_pos()` as this is a mandatory function which
  needs to be defined by all platforms.

Change-Id: I8302292533c943686fff8d7c749a07132c052a3b
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>

Check Trusty is present during the SPD's initialization

Fix normal memory bakery lock implementation

Add a debug assertion in the initialization function of Trusty's SPD
to check for the presence of Trusty. If Trusty is absent then the SPD's
setup function already detects it and returns an error code so the init
function will never been called. Therefore, a debug assertion is enough
to catch this improbable error case.

Change-Id: Id20013e9291cdeef7827b919de2a22455f6cd9f9
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

When loading and authenticating an image, all parent images must also
be authenticated. The parent images are just certificates that don't
need to be used by any other CPU except the one loading the image, and
so there is no need to flush the cache of memory regions where they
are loaded.

Change-Id: Ice8d6979d1c02eabf1a543281ae1a07d098e4a99
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rk3399: Add CFI debug information to SRAM functions

Commit b91d935f
("Add CFI debug frame information for ASM functions") modifies the
assembly macros 'func' and 'endfunc' to include CFI debug frame
information.

The rockchip platform uses a custom version of the 'func' macro with the
common 'endfunc' macro. The custom macro wasn't updated in
b91d935f resulting in the following
build error:
  plat/rockchip/rk3399/drivers/pmu/plat_pmu_macros.S: Assembler messages:
  plat/rockchip/rk3399/drivers/pmu/plat_pmu_macros.S:155: Error: .cfi_endproc without corresponding .cfi_startproc
  Makefile:532: recipe for target 'build/rk3399/release/bl31/plat_helpers.o' failed
  make: *** [build/rk3399/release/bl31/plat_helpers.o] Error 1

Fixing this by updating the sram_func macro in the rk3399 port.

Fixes: b91d935f

 ("Add CFI debug frame information for ASM functions")
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Add CFI debug frame information for ASM functions

Minor fixes in the Trusty SPD code

This patch fixes the following coding style error reported
by the checkpatch.pl script:

  Bad function definition - void el3_exit() should probably
  be void el3_exit(void)

There is another one but it's a false positive so there's no
point in fixing it:

  space prohibited after that '&' (ctx:WxW)
  +#define SMC_NR(entity, fn, fastcall, smc64) ((((fastcall) & 0x1) << 31) | \
                                                            ^
Change-Id: I34de0337c7216dabd16395879f13845a60ee6df0
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

In release builds, the Trusty SPD fails to build because of an unused
variable. Note that this warning message doesn't show in debug builds
because INFO() messages are not compiled out like in release mode.

This patch fixes this issue by removing this variable and using its
value in place directly in the INFO() macro call.

Change-Id: I1f552421181a09412315eef4eaca586012022018
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Clarify dependency for PSCI_EXTENDED_STATE_ID

ZynqMP Updates

spd: dispatcher for interacting with the Trusty TEE

Add dependency information in the user guide for ARM_RECOM_STATE_ID_ENC
that needs to be set when using PSCI_EXTENDED_STATE_ID on ARM
platforms. Also clarify the build error message.

Change-Id: Id125a0299b179f5f222bca4e2503204bf89a3c59
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

This patch fixes an issue in the normal memory bakery lock
implementation. During assertion of lock status, there is a possibility
that the assertion could fail. This is because the previous update done
to the lock status by the owning CPU when not participating in cache
coherency could result in stale data in the cache due to cache maintenance
operations not propagating to all the caches. This patch fixes this issue
by doing an extra read cache maintenance operation prior to the assertion.

Fixes ARM-software/tf-issues#402

Change-Id: I0f38a7c52476a4f58e17ebe0141d256d198be88d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This allows the debugger to print the callstack when there is an
assembly function in the callstack.

It will work as long as the CFA pointer (frame pointer) location is not
modified (i.e. x29 is not touched in AArch64 state). It is the case in
almost all assembly functions, so this patch improves the average
debugging experience. Call stacks from the debugger should still be
interpreted with care. In more complex functions, one could use .cfi*
directives to inform the debugger about the new location of the CFA
pointer.

Change-Id: I9dabfbc033b45e8528e67f4823c17de7bf02fa24
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Cosmetic change to exception table

Docs: Clarify IRQ/FIQ handler API in Interrupt Design Guide

The API description currently states that interrupt handlers
(interrupt_type_handler_t pointers) SHOULD return a pointer
to the target cpu_context.

This patch rewords the description of the interrupts handlers to state
that it MUST return a pointer to the target security context. It also
warns about potential portability issue. Specifically, this pointer is
not used on AArch64 and calls to context library APIs must be used to
ask BL31 to return to a specific context. However, this could change in
the future and interrupt handlers must always return the pointer.

Change-Id: I3f82a046de4d7a5b51a8cbebe7eb2a00dbbdb4f0
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>