GitLab

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I8b19e833a4e1067e1cfcc9bfaede7854e0e63004

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I327a8a2ab0f0e49bd62f413296c3b326393422b6

* changes:
  Tegra194: mce: remove unused NVG functions
  Tegra194: support for NVG interface v6.6
  Tegra194: smmu: add PCIE0R1 mc reg to system suspend save list
  Tegra194: enable driver for general purpose DMA engine
  Tegra194: access XUSB_PADCTL registers on Si/FPGA platforms
  Tegra194: organize the memory/mmio map to make it linear
  Tegra194: memctrl: enable mc sid OVERRIDE for PCIE0R1
  Tegra194: support for boot params wider than 32-bits
  Tegra194: memctrl: set reorder depth limit for PCIE blocks
  Tegra194: memctrl: program MC_TXN_OVERRIDE reg for PTCR, MPCORE and MIU
  Tegra194: memctrl: set CGID_TAG_ADR instead of CGID_TAG_DEFAULT
  Tegra194: memctrl: update mss reprogramming as HW PROD settings
  Tegra194: memctrl: Disable PVARDC coalescer
  Tegra194: memctrl: force seswr/rd transactions as passsthru & coherent
  Tegra194: Request CG7 from last core in cluster
  Tegra194: toggle SE clock during context save/restore
  Tegra: bpmp: fix header file paths

* changes:
  intel: Add function to check fpga readiness
  intel: Add bridge control for FPGA reconfig
  intel: FPGA config_isdone() status query
  intel: System Manager refactoring
  intel: Refactor reset manager driver
  intel: Enable bridge access in Intel platform
  intel: Modify non secure access function

This patch removes unused functions from the NVG driver.

* nvg_enable_power_perf_mode
* nvg_disable_power_perf_mode
* nvg_enable_power_saver_modes
* nvg_disable_power_saver_modes
* nvg_roc_clean_cache
* nvg_roc_flush_cache

Change-Id: I0387a40dec35686deaad623a8350de89acfe9393
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the NVG interface header file to v6.6.

Change-Id: I2f5df274bf820ba1c5df47d8dcbf7f5f056ff45f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

PCIE0R1 security and override registers need to be preserved across
system suspend. Adding them to system suspend save register list.
Due to addition of above registers, increasing context save memory
by 2 bytes.

Change-Id: I1b3a56aee31f3c11e3edc2fb0a6da146eec1a30d
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

This patch enables the GPCDMA for all Tegra194 platforms to help
accelerate all the memory copy operations.

Change-Id: I8cbec99be6ebe4da74221245668b321ba9693479
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Many simulation/emulation platforms do not support this hardware block
leading to SErrors during register accesses.

This patch conditionally accesses the registers from this block only
on actual Si and FPGA platforms.

Change-Id: Ic22817a8c9f81978ba88c5362bfd734a0040d35d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch organizes the platform memory/mmio map, so that the base
addresses for the apertures line up in ascending order. This makes
it easier for the xlat_tables_v2 library to create mappings for each
mmap_add_region call.

Change-Id: Ie1938ba043820625c9fea904009a3d2ccd29f7b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

PCIE0R1 does not program stream IDs, so allow the stream ID to be
overriden by the MC.

Change-Id: I4dbd71e1ce24b11e646de421ef68c762818c2667
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

The previous bootloader is not able to pass boot params wider than
32-bits due to an oversight in the scratch register being used. A
new secure scratch register #75 has been assigned to pass the higher
bits.

This patch adds support to parse the higher bits from scratch #75
and use them in calculating the base address for the location of
the boot params.

Scratch #75 format
====================
31:16 - bl31_plat_params high address
15:0 - bl31_params high address

Change-Id: Id53c45f70a9cb370c776ed7c82ad3f2258576a80
Signed-off-by: Steven Kao <skao@nvidia.com>

HW bug in third party PCIE IP - PCIE datapath hangs when there are
more than 28 outstanding requests on data backbone for x1 controller.

Suggested SW WAR is to limit reorder_depth_limit to 16 for
PCIE 1W/2AW/3W clients.

Change-Id: Id5448251c35d2a93f66a8b5835ae4044f5cef067
Signed-off-by: Puneet Saxena <puneets@nvidia.com>

-PTCR is ISO client so setting it to FORCE_NON_COHERENT.
-MPCORER, MPCOREW and MIU0R/W to MIU7R/W clients itself will provide
ordering so no need to override from mc.
-MIU0R/W to MIU7R/W clients registers are not implemented in tegrasim
so skipping it for simulation.
-All the clients need to set CGID_TAG_ADR to maintain request ordering
within a 4K boundary.

Change-Id: Iaa3189a1f3e40fb4cef28be36bc4baeb5ac8f9ca
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

- All SoC clients should use CGID_TAG_ADR to improve perf
- Remove tegra194_txn_override_cfgs array that is not getting used.

Change-Id: I9130ef5ae8659ed5f9d843ab9a0ecf58b5ce9c74
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

Memory clients are divided in to ISO/NonISO/Order/Unordered/Low
BW/High BW. Based on the client types, HW team recommends, different
memory ordering settings, IO coherency settings and SMMU register settings
for optimized performance of the MC clients.

For example ordered ISO clients should be set as strongly ordered and
should bypass SCF and directly access MC hence set as
FORCE_NON_COHERENT. Like this there are multiple recommendations
for all of the MC clients.

This change sets all these MC registers as per HW spec file.

Change-Id: I8a8a0887cd86bf6fe8ac7835df6c888855738cd9
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Due to a hardware bug PVA may perform memory transactions which
cause coalescer faults. This change works around the issue by
disabling coalescer for PVA0RDC and PVA1RDC.

Change-Id: I27d1f6e7bc819fb303dae98079d9277fa346a1d3
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>

Force memory transactions from seswr and sesrd as coherent_snoop from
no-override. This is necessary as niso clients should use coherent
path.

Presently its set as FORCE_COHERENT_SNOOP. Once SE+TZ is enabled
with SMMU, this needs to be replaced by FORCE_COHERENT.

Change-Id: I8b50722de743b9028129b4715769ef93deab73b5
Signed-off-by: Puneet Saxena <puneets@nvidia.com>

- SC7 requires all the cluster groups to be in CG7 state, else
  is_sc7_allowed will get denied
- As a WAR while requesting CC6, request CG7 as well
- CG7 request will not be honored if it is not last core in Cluster
  group
- This is just to satisfy MCE for now as CG7 is going to be defeatured

Change-Id: Ibf2f8a365a2e46bd427abd563da772b6b618350f
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch adds support to toggle SE clock, using the bpmp_ipc
interface, to enable SE context save/restore. The SE sequence mostly
gets called during System Suspend/Resume.

Change-Id: I9cee12a9e14861d5e3c8c4f18b4d7f898b6ebfa7
Signed-off-by: steven kao <skao@nvidia.com>

This patch fixes the header file paths to include debug.h
from the right location.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: If303792d2169158f436ae6aa5b6d7a4f88e28f7b

This reverts commit d433bbdd.

Change-Id: I46c69dce704a1ce1b50452dd4d62425c4a67f7f0

Setting errata workarounds for N1 1043202 and 1315703 to 0 since
they should be turned off by default.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I116673a4ddcf64436e90d70133f035a133989ed9

Out of two possible implementation of Secure Partition Manager(SPM)
currently only Management mode (MM) design is supported and the support
for SPM based on SPCI Alpha 1 prototype has been removed.

Earlier both implementation used common build flag "ENABLE_SPM" but it
has since been decoupled and MM uses a separate build FLAG "SPM_MM".

Instructions to build it for FVP was still using "ENABLE_SPM", which has
beend corrected in this patch.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I505b98173d6051816436aa602ced6dbec4efc776

Parse the parameter structure the PLM populates, to populate the
bl32 and bl33 image structures.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I317072d1086f6cc6f90883c1b8b6d086ff57b443

ATF handover can be used by Xilinx platforms, so move it to common
file from platform specific files.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5f0839351f534619de581d1953c8427a079487e0

This reverts commit 76d84cbc.

Change-Id: I867af7af3d9f5e568101f79b9ebea578e5cb2a4b