GitLab

Fix Tegra CFLAGS usage

Fix FWU and cache helper optimization

psci: minor fixes in lib

aarch64: Enable Statistical Profiling Extensions for lower ELs

Use TF_CFLAGS instead of CFLAGS, to allow CFLAGS to be overriden from
the make command line.

Change-Id: I3e5726c04bcd0176f232581b8be2c94413374ac7
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Fully initialise essential control registers

Call svc_suspend_finish if registered.
psci_get_stat() is static to psci_stat.c
Fix types used in comparison.
Fix coding style (empty line between variable definition and instructions
block).
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

aarch32: Apply workaround for errata 813419 of Cortex-A57

TLBI instructions for monitor mode won't have the desired effect under
specific circumstances in Cortex-A57 r0p0. The workaround is to
execute DSB and TLBI twice each time.

Even though this errata is only needed in r0p0, the current errata
framework is not prepared to apply run-time workarounds. The current one
is always applied if compiled in, regardless of the CPU or its revision.

The `DSB` instruction used when initializing the translation tables has
been changed to `DSB ISH` as an optimization and to be consistent with
the barriers used for the workaround.

NOTE: This workaround is present in AArch64 TF and already enabled by
default on Juno.

Change-Id: I10b0baa304ed64b13b7b26ea766e61461e759dfa
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

uniphier: embed ROTPK hash into BL1/BL2

plat: Hikey960: fix the CPU hotplug

SPE is only supported in non-secure state.  Accesses to SPE specific
registers from SEL1 will trap to EL3.  During a world switch, before
`TTBR` is modified the SPE profiling buffers are drained.  This is to
avoid a potential invalid memory access in SEL1.

SPE is architecturally specified only for AArch64.

Change-Id: I04a96427d9f9d586c331913d815fdc726855f6b0
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch updates the el3_arch_init_common macro so that it fully
initialises essential control registers rather then relying on hardware
to set the reset values.

The context management functions are also updated to fully initialise
the appropriate control registers when initialising the non-secure and
secure context structures and when preparing to leave EL3 for a lower
EL.

This gives better alignement with the ARM ARM which states that software
must initialise RES0 and RES1 fields with 0 / 1.

This patch also corrects the following typos:

"NASCR definitions" -> "NSACR definitions"

Change-Id: Ia8940b8351dc27bc09e2138b011e249655041cfc
Signed-off-by: David Cunado <david.cunado@arm.com>

This patch enables cache helper functions `flush_dcache_range`,
`clean_dcache_range` and `invalidate_dcache_range` to exit early
if the size argument specified is zero

Change-Id: I0b63e8f4bd3d47ec08bf2a0b0b9a7ff8a269a9b0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch fixes the following issues in Firmware Update (FWU) code:

1. The FWU layer maintains a list of loaded image ids and
   while checking for image overlaps, INVALID_IMAGE_IDs were not
   skipped. The patch now adds code to skip INVALID_IMAGE_IDs.

2. While resetting the state corresponding to an image, the code
   now resets the memory used by the image only if the image were
   copied previously via IMAGE_COPY smc. This prevents the invalid
   zeroing of image memory which are not copied but are directly
   authenticated via IMAGE_AUTH smc.

Change-Id: Idf18e69bcba7259411c88807bd0347d59d9afb8f
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

aarch32: Implement errata workarounds for Cortex A53 and A57

Currently, ROTPK_NOT_DEPLOYED flag is set in plat_get_rotpk_info().
It is up to users how to retrieve ROTPK if the ROT verification is
desired.  This is not nice.

This commit improves plat_get_rotpk_info() implementation and automates
the ROTPK deployment.  UniPhier platform has no ROTPK storage, so it
should be embedded in BL1/BL2, like ARM_ROTPK_LOCATION=devel_rsa case.
This makes sense because UniPhier platform implements its internal ROM
i.e. BL1 is used as updatable pseudo ROM.

Things work like this:

- ROT_KEY (default: $(BUILD_PLAT)/rot_key.pem) is created if missing.
  Users can override ROT_KEY from the command line if they want to
  use a specific ROT key.

- ROTPK_HASH is generated based on ROT_KEY.

- ROTPK_HASH is included by uniphier_rotpk.S and compiled into BL1/BL2.

- ROT_KEY is input to cert_create tool.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

xlat_tables_v2: fix signed/unsigned comparisons

Commit 6de8b24f

 broke Juno AArch32
build.

Change-Id: Ied70d9becb86e53ccb46a2e3245e2a551d1bf701
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Fixes ARM-software/tf-issues#495

Change-Id: I6a0aea78f670cc199873218a18af1d9cc2a6fafd
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This brings the implementation on par with the software
errata workarounds for AArch64.

Change-Id: I98a85fd92e32ae4259f4ec5b3e93cffc87090064
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This brings the implementation on par with the software
errata workarounds for AArch64.

Change-Id: Id103602e35b1c0ad3705a5b2b7cdb34dd8a8c5e2
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Helper function to assist with errata workaround application.

Change-Id: Idba42ca238442cc826f43444dbfa754e433a5e5e
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Flush the console so the errata report is printed correctly
before exit to normal world.

Change-Id: Idd6b5199b5fb8bda9d16a7b5c6426cdda7c73167
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

On ARM platforms before exiting from SP_MIN ensure that
the default console is switched to the runtime serial port.

Change-Id: I0ca0d42cc47e345d56179eac16aa3d6712767c9b
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This patch changes input param level in xlat_tables_print_internal() to
an unsigned int to fix the signed/unsigned comparison warnings. The
compiler complains about these warnings, thus halting the build flow
for Tegra platforms.

Change-Id: Ieccc262a63daca7a26ca6a14d81466397af8b89f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: David Cunado <david.cunado@arm.com>

Resolve build errors flagged by GCC 6.2

With GCC 6.2 compiler, more C undefined behaviour is being flagged as
warnings, which result in build errors in ARM TF build.

This patch addresses issue caused by enums with values that exceed
maximum value for an int. For these cases the enum is converted to
a set of defines.

Change-Id: I5114164be10d86d5beef3ea1ed9be5863855144d
Signed-off-by: David Cunado <david.cunado@arm.com>

hikey960: migrate to use A53 specific defines

The patch fb7d32e5

 migrated the CPU
libraries to have unique defines, prefixing them with the CPU name.

This patch migrates the hikey960 platform port to use the A53 specific
defines.

Change-Id: Id76f544b0b236bbd4974ab5ffa1203f073c20021
Signed-off-by: David Cunado <david.cunado@arm.com>

In CPU off callback function, the old code uses the function
hisi_test_pwrdn_allcores() to check if all CPUs in cluster have been
powered off and if it's valid then power off the whole cluster. But the
function hisi_test_pwrdn_allcores() only maintains the different power
states only for CPU suspend/resume flow, so it cannot return correct
states for CPU on/off flow.

This patch is to change use hisi_test_cpu_down() to check if all CPUs
have been powered off, so that can power off the whole cluster properly
when all CPUs in cluster have been hotplugged off.
Signed-off-by: Tao Wang <kevin.wangtao@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Tegra misra fixes v1

uniphier memory-overrun bug fix

CSS:Fix scpi "get_power_state" when ARM_PLAT_MT is set

tools: Use exported quiet flag from top-level Makefile

Fix coverity error in CSS SCMI driver

hikey960: remove mailbox driver

The ARM_PLAT_MT bit enables the support for MT bit in
MPIDR format. This means that the level 0 affinity
represents the thread and CPU / Cluster levels are
at affinity level 1 and 2 respectively.
This was not catered for in the scpi 'css_scp_get_power_state, API.
Since the SCPI driver can only cater for single threaded CPUs,
this patch fixes the problem by catering for this shift by
effectively ignoring the Thread (level 0) affinity level.

Change-Id: If44f55c9fb2773c8d3f8a9bbcf5420a6f7409dfe
Signed-off-by: jagadeesh ujja <jagadeesh.ujja@arm.com>

Since this mailbox driver is abandoned, remove it.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Check the array index before the write.  This issue was found by a
static analysis tool.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>