GitLab

This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.

Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a device driver for the SMMU hardware block on
Tegra186 SoCs. We use the generic ARM SMMU-500 IP block on
Tegra186. The driver only supports saving the SMMU settings
before entering system suspend. The MC driver and the NS world
clients take care of programming their own settings.

Change-Id: Iab5a90310ee10f6bc8745451ce50952ab3de7188
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The GPU is the real consumer of the video protected memory region
and it needs to be in reset to pick up the new region.

This patch checks if the GPU is in reset before we program the new
video protected memory region settings.

Change-Id: I44f553bfcf07b1975abad53b245954be966c8aeb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186 has an on-die, 320KB, "System RAM" memory. Out of the total
size, 256KB are allocated for the CPU TrustZone binaries - EL3 monitor
and Trusted OS.

This patch changes the base address for bl31.bin to the SysRAM base
address. The carveout is too small for the Trusted OS, so we relocate
only the monitor binary.

Change-Id: Ib4b667ff2a7a619589851338f9d0bfb02078c575
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The CPU Complex (CCPLEX) Power Manager (Denver MCE, or DMCE) is an
offload engine for BPMP to do voltage related sequencing and for
hardware requests to be handled in a better latency than BPMP-firmware.

There are two interfaces to the MCEs - Abstract Request Interface (ARI)
and the traditional NVGINDEX/NVGDATA interface.

MCE supports various commands which can be used by CPUs - ARM as well
as Denver, for power management and reset functionality. Since the
linux kernel is the master for all these scenarios, each MCE command
can be issued by a corresponding SMC. These SMCs have been moved to
SiP SMC space as they are specific to the Tegra186 SoC.

Change-Id: I67bee83d2289a8ab63bc5556e5744e5043803e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186 is the newest SoC in the Tegra family which consists
of two CPU clusters - Denver and A57. The Denver cluster hosts
two next gen Denver15 CPUs while the A57 cluster hosts four ARM
Cortex-A57 CPUs. Unlike previous Tegra generations, all the six
cores on this SoC would be available to the system at the same
time and individual clusters can be powered down to conserve
power.

Change-Id: Id0c9919dbf5186d2938603e0b11e821b5892985e
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The BL2 fills in the UART controller ID to be used as the normal as
well as the crash console on Tegra platforms. The controller ID to
UART controller base address mapping is handled by each Tegra SoC
the base addresses might change across Tegra chips.

This patch adds the handler to parse the platform params to get the
UART ID for the per-soc handlers.

Change-Id: I4d167b20a59aaf52a31e2a8edf94d8d6f89598fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch renames the current Memory Controller driver files to
"_v1". This is done to add a driver for the new Memory Controller
hardware (v2).

Change-Id: I668dbba42f6ee0db2f59a7103f0ae7e1d4684ecf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves these address translation helper macros to individual
Tegra SoC makefiles to provide more control.

Change-Id: Ieab53c457c73747bd0deb250459befb5b7b9363f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch converts the common SiP handler to SoC specific SiP
handler. T210 and T132 have different SiP SMCs and so it makes
sense to move the SiP handler to soc/t132 and soc/t210 folders.

Change-Id: Idfe48384d63641137d74a095432df4724986b241
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Flow Controller hardware block is not present across all Tegra
SoCs, hence include the driver files from SoC specific makefiles.

T132/T210 are the SoCs which include this hardware block while future
SoCs have removed it.

Change-Id: Iaca25766a4fa51567293d10cf14dae968b0fae80
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The TZDRAM base on the reference platform has been bumped up due to
some BL2 memory cleanup. Platforms can also use a different TZDRAM
base by setting TZDRAM_BASE=<value> in the build command line.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements support for T132 (Denver CPU) based Tegra
platforms.

The following features have been added:

* SiP calls to switch T132 CPU's AARCH mode
* Complete PSCI support, including 'System Suspend'
* Platform specific MMIO settings
* Locking of CPU vector registers
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves the inclusion of CPU code (A53, A57) to T210's
makefile. This way we can reduce code size for Tegra platforms by
including only the required CPU files.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

A new config, ENABLE_NS_L2_CPUECTRL_RW_ACCESS, allows Tegra platforms to
enable read/write access to the L2 and CPUECTRL registers. T210 is the
only platform that needs to enable this config for now.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

T210 is the latest chip in the Tegra family of SoCs from NVIDIA. It is an
ARM v8 dual-cluster (A57/A53) SoC, with any one of the clusters being active
at a given point in time.

This patch adds support to boot the Trusted Firmware on T210 SoCs. The patch
also adds support to boot secondary CPUs, enter/exit core power states for
all CPUs in the slow/fast clusters. The support to switch between clusters
is still not available in this patch and would be available later.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This major change pulls out the common functionality from the
FVP and Juno platform ports into the following categories:

*   (include/)plat/common. Common platform porting functionality that
typically may be used by all platforms.

*   (include/)plat/arm/common. Common platform porting functionality
that may be used by all ARM standard platforms. This includes all
ARM development platforms like FVP and Juno but may also include
non-ARM-owned platforms.

*   (include/)plat/arm/board/common. Common platform porting
functionality for ARM development platforms at the board
(off SoC) level.

*   (include/)plat/arm/css/common. Common platform porting
functionality at the ARM Compute SubSystem (CSS) level. Juno
is an example of a CSS-based platform.

*   (include/)plat/arm/soc/common. Common platform porting
functionality at the ARM SoC level, which is not already defined
at the ARM CSS level.

No guarantees are made about the backward compatibility of
functionality provided in (include/)plat/arm.

Also remove any unnecessary variation between the ARM development
platform ports, including:

*   Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the
Juno implementation, which copies the information from BL2 memory
instead of expecting it to persist in shared memory.

*   Unify the TZC configuration. There is no need to add a region
for SCP in Juno; it's enough to simply not allow any access to
this reserved region. Also set region 0 to provide no access by
default instead of assuming this is the case.

*   Unify the number of memory map regions required for ARM
development platforms, although the actual ranges mapped for each
platform may be different. For the FVP port, this reduces the
mapped peripheral address space.

These latter changes will only be observed when the platform ports
are migrated to use the new common platform code in subsequent
patches.

Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8

TLK Dispatcher (tlkd) is based on the tspd and is the glue required
to run TLK as a Secure Payload with the Trusted Firmware.

Change-Id: I69e573d26d52342eb049feef773dd7d2a506f4ab
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch introduces a framework which will allow CPUs to perform
implementation defined actions after a CPU reset, during a CPU or cluster power
down, and when a crash occurs. CPU specific reset handlers have been implemented
in this patch. Other handlers will be implemented in subsequent patches.

Also moved cpu_helpers.S to the new directory lib/cpus/aarch64/.

Change-Id: I1ca1bade4d101d11a898fb30fea2669f9b37b956

Remove all usage of the vpath keyword in makefiles as it was prone
to mistakes. Specify the relative paths to source files instead.

Also reorder source files in makefiles alphabetically.

Fixes ARM-software/tf-issues#121

Change-Id: Id15f60655444bae60e0e2165259efac71a50928b

Move almost all system include files to a logical sub-directory
under ./include. The only remaining system include directories
not under ./include are specific to the platform. Move the
corresponding source files to match the include directory
structure.

Also remove pm.h as it is no longer used.

Change-Id: Ie5ea6368ec5fad459f3e8a802ad129135527f0b3

bl1/aarch64/early_exceptions.S used to be re-used by BL2, BL3-1 and
BL3-2.  There was some early SMC handling code in there that was not
required by the other bootloader stages.  Therefore this patch
introduces an even simpler exception vector source file for BL2,
BL3-1 and BL3-2.

Fixes ARM-software/tf-issues#38

Change-Id: I0244b80e9930b0f8035156a0bf91cc3e9a8f995d

At present, the entry point for each BL image is specified via the
Makefiles and provided on the command line to the linker. When using a
link script the entry point should rather be specified via the ENTRY()
directive in the link script.

This patch updates linker scripts of all BL images to specify the entry
point using the ENTRY() directive. It also removes the --entry flag
passed to the linker through Makefile.

Fixes issue ARM-software/tf-issues#66

Change-Id: I1369493ebbacea31885b51185441f6b628cf8da0

This change requires all platforms to now specify a list of source files
rather than object files.

New source files should preferably be specified by using the path as
well and we should add this in the future for all files so we can remove
use of vpath. This is desirable because vpath hides issues like the fact
that BL2 currently pulls in a BL1 file bl1/aarch64/early_exceptions.S
and if in the future we added bl2/aarch64/early_exceptions.S then it's
likely only one of the two version would be used for both bootloaders.

This change also removes the 'dump' build target and simply gets
bootloaders to always generate a dump file. At the same time the -x
option is added so the section headers and symbols table are listed.

Fixes ARM-software/tf-issues#11

Change-Id: Ie38f7be76fed95756c8576cf3f3ea3b7015a18dc
Signed-off-by: Jon Medhurst <tixy@linaro.org>

This patch factors out the ARM FVP specific code to create MMU
translation tables so that it is possible for a boot loader stage to
create a different set of tables instead of using the default ones.
The default translation tables are created with the assumption that
the calling boot loader stage executes out of secure SRAM. This might
not be true for the BL3_2 stage in the future.

A boot loader stage can define the `fill_xlation_tables()` function as
per its requirements. It returns a reference to the level 1
translation table which is used by the common platform code to setup
the TTBR_EL3.

This patch is a temporary solution before a larger rework of
translation table creation logic is introduced.

Change-Id: I09a075d5da16822ee32a411a9dbe284718fb4ff6

Tidy up the spacing of variable definitions within the makefiles to make
them more consistent, easier to read and amend.

Change-Id: Ic6d7c8489ca4330824abb5cd1ead8f1d449d1a85
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

Move all explicit platform or architecture specific references
into a new platform.mk file that is defined for each platform.

Change-Id: I9d6320d1ba957e0cc8d9b316b3578132331fa428
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

Change-Id: Ic7fb61aabae1d515b9e6baf3dd003807ff42da60

- This change is split into two separate patches in order to
  simplify the history as interpreted by 'git'. The split is
  between the move/rename and addition of new files.
- Remove dependency on toolchain C library headers and functions in
  order to ensure behavioural compatibility between toolchains.
- Use FreeBSD as reference for C library implementation.
- Do not let GCC use default library include paths.
- Remove unused definitions in modified headers and implementations.
- Move C library files to 'lib/stdlib' and 'include/stdlib'.
- Break std.c functions out into separate files.

Change-Id: I91cddfb3229775f770ad781589670c57d347a154

- Add instructions for contributing to ARM Trusted Firmware.

- Update copyright text in all files to acknowledge contributors.

Change-Id: I9311aac81b00c6c167d2f8c889aea403b84450e5