GitLab

Change-Id: I576ae161477f4a69336d15a7741e566bb103124a
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>

This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.

Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds support for Corstone-700 foundation IP, which integrates
both Cortex-M0+ and Cortex-A(Host) processors in one handy, flexible
subsystem.
This is an example implementation of Corstone-700 IP host firmware.

Cortex-M0+ will take care of boot stages 1 and 2(BL1/BL2) as well as
bringing Host out RESET. Host will start execution directly from BL32 and
then will jump to Linux.

It is an initial port and additional features are expected to be added
later.

Change-Id: I7b5c0278243d574284b777b2408375d007a7736e
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

ISB instruction was removed from the N1 1043202 Errata Workaround [1], this
fix is adding the ISB instruction back in.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I74eac7f6ad38991c36d423ad6aa44558033ad388

Driver will calculate DDR size instead of using hardcoded value
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642cf2180929965ef12bd5ae4393b2f3d0dcddde

Currently, console drivers prepend '\r' to '\n' by themselves. This is
common enough to be supported in the framework.

Add a new flag, CONSOLE_FLAG_TRANSLATE_CRLF. A driver can set this
flag to ask the framework to transform LF into CRLF instead of doing
it by itself.

Change-Id: I4f5c5887591bc0a8749a105abe62b6562eaf503b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

To provide glitchless clock to downstream logic even if clock toggles
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I728d64d0ba3b4492125bea5b0737fc83180356f1

GCC diagnostics were added to ignore array boundaries, instead
of ignoring GCC warning current code will check for array boundaries
and perform and array update only for valid elements.

Resolves: `CID 246574` `CID 246710` `CID 246651`
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I7530ecf7a1707351c6ee87e90cc3d33574088f57

SMMUv3 driver functions which are called from BL1 and BL31
currently use counter-based poll method for testing status
bits. Adding Delay Timer driver to BL1 and BL31 is required
for timeout-based implementation using timer delay functions
for SMMU and other drivers.
This patch adds new function `fvp_timer_init()` which
initialises either System level generic or SP804 timer based on
FVP_USE_SP804_TIMER build flag.
In BL2U `bl2u_early_platform_setup()` function the call to
`arm_bl2u_early_platform_setup()` (which calls
`generic_delay_timer_init()` ignoring FVP_USE_SP804_TIMER flag),
is replaced with `arm_console_boot_init()` and `fvp_timer_init()`.

Change-Id: Ifd8dcebf4019e877b9bc5641551deef77a44c0d1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Rename RCAR_PRODUCT_* to PRR_PRODUCT_* and drop the duplicate
RCAR_PRODUCT_* macro.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6b2789790b85edb79c026f0860d70f323d113d96

Pull out the PRR_* macros into rcar_def.h and remove multiple copies of
it. Now that there are still RCAR_* macros in rcar_def.h too and they
have the exact same meaning as the PRR_* macros, but that's for another
patch.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Icb7f61b971b1a23102bd1b9f58cda580660a55fc

The valgrind checks for cert_create have not been run in a long while -
as such there are a few memory leaks present. This patch fixes a few of
the major ones reported by valgrind. However, a few do remain.

Change-Id: Iab002fb2b0090043287d43fb54a4d18928c2ed85
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

This patch fixes FVP_Base_AEMv8A model hang issue with
ARMv8.4+ with cache modelling enabled configuration.
Incorrect L1 cache flush operation to PoU, using CLIDR_EL1
LoUIS field, which is required by the architecture to be
zero for ARMv8.4-A with ARMv8.4-S2FWB feature is replaced
with L1 to L2 and L2 to L3 (if L3 is present) cache flushes.
FVP_Base_AEMv8A model can be configured with L3 enabled by
setting `cluster0.l3cache-size` and `cluster1.l3cache-size`
to non-zero values, and presence of L3 is checked in
`aem_generic_core_pwr_dwn` function by reading
CLIDR_EL1.Ctype3 field value.

Change-Id: If3de3d4eb5ed409e5b4ccdbc2fe6d5a01894a9af
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

* changes:
  Juno: Use shared mbedtls heap between bl1 and bl2
  Juno: add basic support for dynamic config

This patch updates all Tegra platforms to use the new multi console API.

Change-Id: I27c0c7830a86e26491dea9991a689f0b01e4dbf0
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>

* changes:
  rockchip: rk3399: store actual debug uart information on suspend
  rockchip: move dt-coreboot uart distinction into param handling code
  rockchip: make uart baudrate configurable
  rockchip: px30: add uart5 as option for serial output

This patch modifies crash reporting for AArch64 to provide
aligned output of register dump and GIC registers.

Change-Id: I8743bf1d2d6d56086e735df43785ef28051c5fc3
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Increase calibration delay, fix ddrio control config & nonsecure region
limit
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ibca3c247a3ad5104176ca9057d29755599f13c9b

Extract clock information for UART, MMC & Watchdog from the clock manager
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I42d3d4ceeaf45788d457472f6ddcd3fe099f0133

* changes:
  Fix Coverity #261967, Infinite loop
  Fix Coverity #343017, Missing unlock
  Fix Coverity #343008, Side affect in assertion
  Fix Coverity #342970, Uninitialized scalar variable

Change-Id: Ia1ecad58ebf9de3f3a44b17ad1de57424b431125
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Add the disable_auth dynamic parameter, that allows to disable the
authentication when TBBR is enabled. This parameter is for development
only.

Change-Id: Ic24ad16738517f7e07c4f506dcf69a1ae8df7d2d
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

The rk3399 suspend code saves and restores the debug uart settings, but
right now always does this for the default uart. Right now this works
only by chance for the majority of rk3399 boards, which do not deviate
from that default.

But both Coreboot as well as U-Boot-based platforms can actually use
different uarts for their output, which can be configured from either
devicetree or Coreboot-variables.

To fix this, just use the stored uart-base information instead of the
default constant.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I1ea059d59a1126f6f8702315df7e620e632b686e