GitLab

Change-Id: I0cebbaa900aa518700f13cbf02f8a97e0c76b21c
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Add references to the OcteonTX2 CN913x family.

Change-Id: I172a8e3d061086bf4843acad014c113c80359e01
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

CN-9130 has single CP0 inside the package and 2 additional one from MoChi
interface. In case of db-9130-modular board the MCI interface is routed to:
- on-board CP115 (MCI0)
- extension board CP115 (MCI1)

The board is based on DIMM DDR.

The 9130 has up to 3CP, and decoding windows looks like below:

  (free for further use)
 .----------. 0xf800 0000
 | CP2 CFG  |
 '----------' 0xf600 0000
 | CP1 CFG  |
 '----------' 0xf400 0000
 | CP0 CFG  |
 '----------' 0xf200 0000
 | AP CFG   |
 '----------' 0xf000 0000
  (free for further use)
 .----------. 0xec00 0000
 | SPI      |
 | MEM_MAP  | (Currently not opened)
 '----------' 0xe800 0000
 | PEX2_CP2 |
 '----------' 0xe700 0000
 | PEX1_CP2 |
 '----------' 0xe600 0000
 | PEX0-CP2 |
 '----------'
 .----------. 0xe500 0000
 | PEX2_CP1 |
 '----------' 0xe400 0000
 | PEX1_CP1 |
 '----------' 0xe300 0000
 | PEX0-CP1 |
 '----------'
 .----------. 0xe200 0000
 | PEX2-CP0 |
 '----------' 0xe100 0000
 | PEX1-CP0 |
 '----------' 0xe000 0000
 | PEX0-CP0 |
 | 512MB    |
 '----------' 0xc000 0000

Change-Id: Ia8eee4f96c1043753f74f9da437b9f72ce2d6eb0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

As the preparation for adding the CN913x SoC family support
introduce code that enable SVC and the frequency handling
specific for the AP807 North Bridge.

Change-Id: Ibe34a511b49cd9671a2e53b77bdcfc644bb915e3
Signed-off-by: Alex Evraev <alexev@marvell.com>

Update AVS settings and remove unused macros.
This is a preparation patch for adding CN913x SoC
family support.

Change-Id: Ib1dd70885a316ed5763d0f4730d0e4734da117b7
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Add CN913x case to bl2_plat_get_cp_count.
Fix loading of cp1/2 image. This is a preparation
patch for adding CN913x SoC family support.

Change-Id: Id84a30203d20572fc0dfd3f91ea395c199a85fe9
Signed-off-by: Ben Peled <bpeled@marvell.com>

Add support for “AVS reduction” feature at this mode for
7040 Dual Cluster operation mode at CPU=1600MHz

Change-Id: Ia72b10e0ccfad07568bf4c089ea3990173ae24b2
Signed-off-by: Alex Evraev <alexev@marvell.com>

the twin-die combined memory device should be treated as
X8 device and not as X16 one. This patch is required to
re-enable compilation after BLE (mv-ddr-marvell) firmware upgrade.

Change-Id: I41257ff2825164ebca85a84bbb8462d7b3447b97
Signed-off-by: Moti Buskila <motib@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

This patch fixes violation of Rules 10.1, 10.4,
11.9 and 13.2 reported by MISRA-2012 scan.

Change-Id: Ibe9190cb0f26ae85d9a31db8e92fbd32f1740e25
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

The link to the exception handling framework page on the System Design /
Firmware Design / Section 4.3 just links to itself, so I changed it to
link to the exception handling framework component document.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I6711b423a789b2b3d1921671e8497fffa8ba33d1

This patch fixes defects 10.3, 10.4, 10.7, 20.7
reported by MISRA-2012 scan and adds braces for
conditional statements according to the TF-A
coding style.

Change-Id: If84ed31cdd55bc8e7cdd2a5f48c0dacc25792112
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Enabled 'SMCCC_ARCH_SOC_ID' feature for Nvidia Tegra platforms.

Change-Id: If17415f42304c6518aeead8dfe5909c378aaa777
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Currently, soc-revision information is not available for arm
platforms hence disabled 'SMCCC_ARCH_SOC_ID' feature for all arm
platforms.

Change-Id: I1ab878c6a4c8fecfff63bc6dde83e3ecefe20279
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Currently, 'SMCCC_ARCH_FEATURES' SMC call handler unconditionally
returns 'SMC_OK' for 'SMCCC_ARCH_SOC_ID' function. This seems to
be not correct for the platform which doesn't implement soc-id
functionality i.e. functions to retrieve both soc-version and
soc-revision.
Hence introduced a platform function which will check whether SMCCC
feature is available for the platform.

Also, updated porting guide for the newly added platform function.

Change-Id: I389f0ef6b0837bb24c712aa995b7176117bc7961
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

SPM(BL32) and hafnium(BL33) expect their manifest base address in x0
register, which is updated during BL2 stage by parsing fw_config.
In case of RESET_TO_BL31 it has to be updated while populating
entry point information.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I6f4a97f3405029bd6ba25f0935e2d1f74bb95517

As secondary cores show up, they populate an array to
announce themselves so plat_core_pos_by_mpidr() can
return an invalid COREID code for any non-existing
MPIDR that it is queried about.

The Power Domain Tree Description is populated with
a topology based on the maximum harcoded values.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I8fd64761a2296714ce0f37c46544f3e6f13b5f61

This reverts commit 11af40b6, reversing
changes made to 2afcf1d4.

This errata workaround did not work as intended so we are reverting this
change.  In the future, when the corrected workaround is published in an
SDEN, we will push a new workaround.

This is the patch being reverted:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/4750

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I20aa064c1bac9671939e657bec269d32b9e75a97

* changes:
  plat/arm: Move fconf population after the enablement of MMU
  lib/fconf: Update 'set_fw_config_info' function
  lib/fconf: Update data type of config max size
  plat/arm: Check the need for firmware update only once
  plat/arm: sgm: Use consistent name for tb fw config node

In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after cache gets enabled (i.e. after MMU gets enabled).
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2e75cabd76b1cb7a660f6b72f409ab40d2877284

Updated the function 'set_fw_config_info' to make it generic
by doing below changes:

1. Rename function name from 'set_fw_config_info' to 'set_config_info'
2. Take image_id as an argument so that this function can set any
   config information.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Icf29e19d3e9996d8154d84dbbbc76712fab0f0c1

Update the data type of the member 'config_max_size' present in the
structure 'dyn_cfg_dtb_info_t' to uint32_t.

This change is being done so that dyn_cfg_dtb_info_t and image_info
structure should use same data type for maximum size.

Change-Id: I9b5927a47eb8351bbf3664b8b1e047ae1ae5a260
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Currently, the need for firmware update is being checked twice
in the code hence modifications are done to do this check only
once and set the global variable.
Then this global variable helps to decide whether to go for
normal boot or firmware update flow.

Change-Id: I8469284555a8039786f34670f9dc4830f87aecc1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Renamed node for trusted boot fw config from 'plat_arm_bl2' to
'tb_fw-config'.

Change-Id: I2e16b6f4d272292ec1855daafd014e851436dd9b
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Update SGI-575, RD-E1-Edge and RD-N1-Edge FVP versions to 11.10/36 and
add RD-N1-Edge-Dual to the list of supported Arm Fixed Virtual
Platforms.

Change-Id: I9e7e5662324eeefc80d799ca5341b5bc4dc39cbb
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Merge changes from topics "af/add_measured_boot_bl1_bl2", "af/add_measured_boot_driver", "af/add_measured_boot_driver_support", "af/add_measured_boot_fconf", "af/add_measured_boot_fvp" into integration

* changes:
  plat/arm/board/fvp: Add support for Measured Boot
  TF-A: Add support for Measured Boot driver to FCONF
  TF-A: Add support for Measured Boot driver in BL1 and BL2
  TF-A: Add Event Log for Measured Boot
  TF-A: Add support for Measured Boot driver

* changes:
  stm32mp1: SCMI clock and reset service in SP_MIN
  dts: bindings: stm32mp1: define SCMI clock and reset domain IDs

This patch adds support for Measured Boot functionality
to FVP platform code. It also defines new properties
in 'tpm_event_log' node to store Event Log address and
it size
'tpm_event_log_sm_addr'
'tpm_event_log_addr'
'tpm_event_log_size'
in 'event_log.dtsi' included in 'fvp_tsp_fw_config.dts'
and 'fvp_nt_fw_config.dts'. The node and its properties
are described in binding document
'docs\components\measured_boot\event_log.rst'.

Change-Id: I087e1423afcb269d6cfe79c1af9c348931991292
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>