Skip to content

GitLab

Switch branch/tag
  1. 20 Apr, 2021 5 commits
  3. 08 Apr, 2021 2 commits
  5. 06 Apr, 2021 3 commits
    • Pali Rohár's avatar
      drivers: marvell: comphy-a3700: Set TXDCLK_2X_SEL bit during PCIe initialization · 40d08192
      Pali Rohár authored 
      

Marvell Armada 3700 Functional Specifications, section 52.2 PCIe Link
Initialization says that TXDCLK_2X_SEL bit needs to be enabled for PCIe
Root Complex mode. Both U-Boot and Linux kernel support only Root Complex
mode. Set this bit.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: Id2a538c379b911b62597f9463b4842b7b5c24df7
      40d08192
    • Pali Rohár's avatar
      drivers: marvell: comphy-a3700: Set mask parameter for every reg_set call · ccec1bd5
      Pali Rohár authored 
      

The third argument of the reg_set() function has name 'mask', which
indicates that it is a mask applied to the register value which is
going to be updated. But the implementation of this function uses
this argument to clear prior value of the register, i.e. instead of
  new_val = (old_val & ~mask) | (data & mask);
it does
  new_val = (new_val & ~mask) | data;

(The more proper name for this function should be reg_clrsetbits(),
 since internally it calls mmio_clrsetbits_32().)

To make code more readable set 'mask' argument to real mask, i.e. bits
of register values which are going to be updated.

This patch does not make any functional change, only cosmetic, due to
how 'mask' is interpreted.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: Ifa0339e79c07d1994c7971b65d966b92cb735f65
      ccec1bd5
    • Pali Rohár's avatar
      drivers: marvell: comphy-a3700: Fix configuring polarity invert bits · ee4c70eb
      Pali Rohár authored 
      

TXD_INVERT_BIT or RXD_INVERT_BIT needs to be set only in case when
appropriate polarity is inverted. Otherwise these bits should be
cleared.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I8b09fab883a7b995fd72a7d8ae6233f0fa07011b
      ee4c70eb
  7. 01 Apr, 2021 1 commit
  9. 26 Mar, 2021 1 commit
    • Bharat Gooty's avatar
      driver: brcm: add i2c driver · 48c6a6b6
      Bharat Gooty authored 
      

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: default avatarBharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
      48c6a6b6
  11. 24 Mar, 2021 19 commits
  13. 23 Mar, 2021 1 commit
    • Yann Gautier's avatar
      tzc400: add support for interrupts · 34c1a1a4
      Yann Gautier authored 
      

A new function tzc400_it_handler() is created to manage TZC400
interrupts. The required helpers to read and clear interrupts are added
as well.
In case DEBUG is enabled, more information about the faulty access
(address, NSAID, type of access) is displayed.

Change-Id: Ie9ab1c199a8f12b2c9472d7120efbdf35711284a
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      34c1a1a4
  15. 19 Mar, 2021 1 commit
  17. 17 Mar, 2021 1 commit
    • deqi.hu's avatar
      mmc:prevent accessing to the released space in case of wrong usage · 13f3c516
      deqi.hu authored 
      1.Since in mmc_init, the most of mmc_device_info passed in are temporary variables.
  In order to avoid referencing the released space on the stack when maybe MISUSED,
  it`s better to use global variables to store mmc_device_info in mmc.c
2.Delete redundant;

Signed-off-by: deqi.hu@siengine.com
Change-Id: I51ae90e7f878b19b4963508b3f7ec66339015ebc
      13f3c516
  19. 24 Feb, 2021 1 commit
  21. 16 Feb, 2021 3 commits
    • Pali Rohár's avatar
      marvell: uart: a3720: Increase TX FIFO EMPTY timeout from 2ms to 3ms · 0d06b058
      Pali Rohár authored 
      

TX FIFO has space for 32 characters. With default UART baudrate 115200 it
takes more than 2ms to transmit all 32 characters, so wait at least 3ms
before flushing TX FIFO.

If WTMI firmware transmitted something via UART before TF-A was booted,
some characters may still wait in TX FIFO when TF-A is initializing UART
driver. So wait at least 3ms to ensure that HW has enough time to transmit
all characters waiting in TX FIFO.

This fixes an issue where sometimes characters transmitted on UART by our
custom WTMI image are lost.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I8ea4ea58e4ba3e0c0d7f47e679171b9b94442f19
      0d06b058
    • Pali Rohár's avatar
      marvell: uart: a3720: Update delay code to be compatible with 1200 MHz CPU · 98641515
      Pali Rohár authored 
      

Console initialization function needs to wait at least minimal specified
time. The fastest Armada 3720 CPU is 1200 MHz so increase loop delay to
wait at least for 100 us on 1200 MHz variant too. The slowest Armada 3720
CPU is 600 MHz and in this case delay loop would take just 2 times more,
which is not a problem.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I1f0b4aabd0e08b7696feec631419f7f7c7ec17d2
      98641515
    • Pali Rohár's avatar
      marvell: uart: a3720: Fix comments in console_a3700_core_init() function · ab1fe188
      Pali Rohár authored 
      

The delay loop executes 3 instructions. These 3 instructions are executed
in 2 processor ticks and 30000 iterations on a 600 MHz CPU should yield
approximately 100 us. This means we are waiting 2 ms, not 20 ms, for TX
FIFO to be empty.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I2cccad405bcc73cd6d1062adc0205c405c16c15f
      ab1fe188
  23. 11 Feb, 2021 2 commits