GitLab

Change-Id: I604b38ffa40e04c6e2aaede28e9f61335bbffdc0
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This service, called with SMC from Non secure world, allows access to
some configurations saved in OTP fuses.

Change-Id: I92ba5614b2cb4a03260119e2cf74f2cd626a3431
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

The BSEC (Boot and Security and OTP control) is intended to control an OTP
(one time programmable) fuse box, used for on-chip non-volatile storage
for device configuration and security parameters.

Change-Id: I38c44684c7b9c6a1f24ec0ae3fe99cec481d5a51
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

Change-Id: I9c8241d8cd9d95b647c612dd66dd554d5965c2ac
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

Change fdt_check_status function to fdt_get_status.
Update GPIO defines.
Move some functions in gpio driver, instead of dt helper file.
Add GPIO bank helper functions.
Use only one status field in dt_node_info structure including both status
and secure status.

Change-Id: I34f93408dd4aac16ae722f564bc3f7d6ae978cf4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

Move print_reset_reason function to bl2_plat_setup.c
Put __unused attribute for unused bl2_el3_early_platform_setup args.
Rename dt_dev_info to dt_uart_info.
Put MMU configuration earlier.
Remove unused macros.
Use U() or ULL() macros where needed.
Use device tree to configure GIC.
Use GIC helper function.

Change-Id: I34620c421cc6967a668bca318f7689fd74fa78a6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Reword some traces.
Use uintptr_t where required.
Reduce scope of variables.
Improve io_stm32image algo.
Complete some IP registers definitions.
Add failure on supported DDR (stm32mp1_ddr_init()).
Fix cache flush on cache disable (stm32mp1_ddr_setup).

Change-Id: Ie02fa71e02b9d69abc807fd5b7df233e5be6668c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

Change-Id: I4a1b281925e0a3a1e2a34b3e363537e4a7f13823
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

The drivers are also updated to reflect the changes.
Set RCC as non-secure.

Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This is the correct name of the IP.
Rename stm32mp1_pmic files to stm32mp_pmic.

Change-Id: I238a7d1f9a1d099daf7788dc9ebbd3146ba2f15f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The driver could be used for other devices than PMIC.

Change-Id: I4569e7c0028e52e1ff2fe9d38f11de11e95d1897
Signed-off-by: Yann Gautier <yann.gautier@st.com>

readme: Update list of supported platforms

Change-Id: I13b7b16a13f51bcb83098d7c55701f9ee03859a8
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: fix RPI3_PRELOADED_DTB_BASE usage

Add i.MX8 SoC SRTC/cpu-freq SIP runtime service support

Tegra downstream rebase 1.3.19

On i.MX8QM/i.MX8QX with system controller inside, the CPU's clock
rate is managed by SCFW(system controller firmware) and can ONLY be
changed from secure world, so SIP runtime service is needed for
setting CPU's clock rate, this patch adds cpu-freq SIP runtime service
support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

On i.MX8QM/i.MX8QX with system controller inside, the SRTC is
managed by SCFW(system controller firmware) and some functions
like setting SRTC's time etc. can ONLY be requested from secure
world, so SIP runtime service is needed for such kind of operations,
this patch adds SRTC SIP runtime service support for i.MX8QM and
i.MX8QX.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

NXP's i.MX8 SoCs have system controller (M4 core) which takes
control of timer management, including watchdog, srtc and system
counter etc., other clusters like Cortex-A35 can send out command
via MU (Message Unit) to system controller for timer operation.

This patch adds timer IPC(inter-processor communication) support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

In case if `RPI3_PRELOADED_DTB_BASE` isn't defined explicitly with
proper pre-loaded DTB address, `add_define` macro defined in
`make_helpers/build_macros.mk` still supplies this definition to the
compiler like `-DRPI3_PRELOADED_DTB_BASE`, and it's obviously is set to
default value 1.

This simply leads to the wrong `MAP_NS_DTB` region definition (base_va
is set `0x1` instead of `0x00010000`) in `plat/rpi3/rpi3_common.c`:

Which causes aligment check to fail in `mmap_add_region_check()`:
VERBOSE: base_pa: 0x00000001, base_va: 0x00000001, size: 0x00010000
...
ERROR:   mmap_add_region_check() failed. error -22
Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>

This patch removes unused type conversions as all the relevant macros
now use U()/ULL(), making these explicit typecasts unnecessary.

Change-Id: I01fb534649db2aaf186406b1aef6897662b44fe3
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch enables L2 error correction and parity protection
for Tegra210 on boot and exit from suspend. The previous bootloader
sets the boot parameter, indicating ECC reporting, only for B01 SKUs.

Change-Id: I6927884d375a64c69e2f1e9aed85f95c5e3cb17c
Signed-off-by: Sam Payne <spayne@nvidia.com>

This patch skips the BTB invalidate workaround for Tegra210-B01 chips, as
they have already been fixed in the hardware. To allow the .S file to
include macros, add proper guards to tegra_platform.h.

Change-Id: I0826d3c54faeffc9cb0709331f47cbdf25d4b653
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

Set MC Clients ordering as per the clients needs(ordered, BW, ISO/non-ISO)
based on the latest info received from HW team as a part of BW issues debug.

SMMU Client config register are obsolete from T186. Clean up the unnecessary
register definitions and programming of these registers.
Cleanup unnecessary macros as well.

Change-Id: I0d28ae8842a33ed534f6a15bfca3c9926b3d46b2
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>

This patch memmaps all the IRAM memory banks during boot. The BPMP
firmware might place the channels in any of the IRAMs, so it is better
to map all the banks to avoid surprises.

Change-Id: Ia009a65d227ee50fbb23e511ce509daf41b877ee
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the logic to check if Atomics hardware block is powered
on during boot

Reported by: Peter De Schrijver <pdeschrijver@nvidia.com>

Change-Id: I4a6521bcee37225d1402321151c48fa631776b8a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the macros to include the newly added IRAM
memory apertures.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I931daa310d738e8bf966f14e11d0631920e9bdde

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Force operands of an operator to the same type category [Rule 10.4]

Added curly braces ({}) around if statements in order to
make them compound [Rule 15.6]

Change-Id: I4840c3122939f736113d61f1462af3bd7b0b5085
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

convert object type to match the type of function parameters
[Rule 10.3]

Force operands of an operator to the same type category [Rule 10.4]

Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: I5840a07f37beefc3326ac56d0b4a4701602bd8a8
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch removes unwanted error prints from the MCE command
handler, to reduce the code complexity for this function.

Tested with 'pmccabe'

Change-Id: I375d289db1df9e119eeb1830210974457c8905a4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes support for the SC8 power state as the feature is no
longer required for Tegra186 projects.

Change-Id: I622a5ddcffe025b9b798801d09bbb856853befd7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

* Expressions resulting from the expansion of macro parameters
  shall be enclosed in parentheses [Rule 20.7]
* Added explicit casts (e.g. 0U) to integers in order for them
  to be compatible with whatever operation they're used in [Rule
  10.1]
* Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: Ia83c3ab6e4c8c03c19c950978a7936ebfc290590
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Force operands of an operator to the same type category [Rule 10.4]

Voided non c-library functions whose return types are not used [Rule 17.7]

Change-Id: I758e7ef6d45dd2edf4cd5580e2af15219246e75c
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

* EKS blob size was not passed by as a boot parameter
  earlier. Its being passed now
* If EKS value sent by bootloader is non-zero
  update the boot parameter from default value to the argument
  passed by bootloader

Change-Id: I65a3091bd2c1c908cc9e81c0aab6489cab02c098
Signed-off-by: Akshay Sharan <asharan@nvidia.com>

DRBG must be initialized to guarantee SRK has a random
value during suspend. This patch add a sequence to generate
an SRK on boot and during resume for SE1 and SE2. This SRK
value is not saved to PMC scratch, and should be overwitten
during atomic suspend.

Change-Id: Id5e2dc74a1b462dd6addaec1709fec46083a6e1c
Signed-off-by: Sam Payne <spayne@nvidia.com>

This patch adds the driver to communicate with the BPMP processor
for power management use cases. BPMP controls the entry into cluster
and system power states. The Tegra210 platform port queries the BPMP
to calculate the target state for the cluster. In case BPMP does not
allow CCx entry, the core enters a power down state.

Change-Id: I9c40aef561607a0b02c49b7f8118570eb9105cc9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes MISRA defects for the MCE driver.

* Using logical NOT for bool type function
* Using MPIDR_AFFLVL_MASK << MPIDR_AFFINITY_BITS replace
  MPIDR_CLUSTER_MASK

Change-Id: I97e96f172a3c1158646a15a184c273c53a103d63
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

This patch uses int32_t to replace ints, to fix Rule 4.6 of the
MISRA standard.

Change-Id: I20ac6185929eced684b43da3ef1f8cd5fbddc83d
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds (void) for unused function parameters to
fix Rule 2.7 of the MISRA standard.

Change-Id: Ibc3f10b3bfe73363383b4c28413ab8d99fbc8c89
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the implementation of the SE atomic context save
sequence. The atomic context-save consistently saves to the TZRAM
carveout; thus there is no need to declare context save buffer or
map MMU region in TZRAM for context save. The atomic context-save
routine is responsible to validate the context-save progress
counter, where CTX_SAVE_CNT=133(SE1)/646(SE2), and the SE error
status to ensure the context save procedure complete successfully.

Change-Id: Ic80843902af70e76415530266cb158f668976c42
Signed-off-by: Marvin Hsu <marvinh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>