GitLab

Register in the shared resources driver the secure or non-secure state
of the IWDG instances.

Change-Id: I3a3bc9525447f6a2a465891ca3a3fd5fe664ca07
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Register in the shared resources driver the secure or non-secure
state of the PMIC.

Change-Id: Ic1f172ba62785018f8e9bb321782d725e2d2f434
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Introduce helper functions stm32mp_register_secure_gpio() and
stm32mp_register_non_secure_gpio() for drivers to register a
GPIO pin as secure or non-secure.

These functions are stubbed when shared resource driver is not
embedded in the BL image so that drivers do not bother whether they
shall register or not their resources.

Change-Id: I1fe98576c072ae31f75427c9ac5c9f6c4f1b6ed1
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Introduce helper functions stm32mp_register_secure_periph_iomem()
and stm32mp_register_non_secure_periph_iomem() for drivers to
register a resource as secure or non-secure based on its SoC
interface registers base address.

These functions are stubbed when shared resources driver is not
embedded (!STM32MP_SHARED_RESOURCES) so that drivers embedded
in other BL stages do not bother whether they shall register or
not their resources.

Change-Id: Icebd05a930afc5964bc4677357da5d1b23666066
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Update implementation of stm32mp_nsec_can_access_reset() based
on the registering of the shared resources.

Querying registering state locks further registration of
peripherals.

Change-Id: I5f38f2a3481780b9a71939d95984c4821c537aa4
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Update implementation of stm32mp_nsec_can_access_clock() based
on the registering of the shared resources.

Querying registering state locks further registration of peripherals.

Change-Id: If68f6d4a52c4742ba66244c6ea2d9afa08404137
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Define helper functions stm32mp_register_secure_periph() and
stm32mp_register_non_secure_periph() for platform drivers to
register a shared resource assigned to respectively secure
or non-secure world.

Some resources are related to clock resources. When a resource is
registered as secure, ensure its clock dependencies are also
registered as secure. Registering a non-secure resource does not
mandate its clock dependencies are also registered as non-secure.

Change-Id: I74975be8976b8d3bf18dcc807541a072803af6e3
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Introduce stm32mp1_register_clock_parents_secure() in stm32mp1
clock driver to allow platform shared resources to register as
secure the parent clocks of a clock registered as secure.

Change-Id: I53a9ab6aa78ee840ededce67e7b12a84e08ee843
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Define from helper functions to get a human readable string
identifier from a shared resource enumerated ID. Use them to
make debug traces more friendly peripheral registering functions.

Change-Id: I9e207b8ce1d1e9250e242ca7e15461b9a1532f40
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

* changes:
  stm32mp1: shared resources: apply registered configuration
  stm32mp1: shared resources: count GPIOZ bank pins
  stm32mp1: shared resources: define resource identifiers

Fix all external broken links reported by Sphinx linkcheck tool.

This does not take care of broken cross-references between internal
TF-A documentation files. These will be fixed in a future patch.

Change-Id: I2a740a3ec0b688c14aad575a6c2ac71e72ce051e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

There were some links in the file "ras.rst" which were broken, this
patch fixes all the broken links in this file.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I00cf080e9338af5786239a4843cb4c2e0cc9d99d

The TF-A firmware build system is capable of building on both Unix like
and Windows host PCs. The commit ID 7ff088 "Enable MTE support" updated
the Makefile to conditionally enable the MTE support if the AArch64
architecture revision was greater than 8.5. However, the Makefile changes
were dependent on shell commands that are only available on unix shells,
resulting in build failures on a Windows host PC.

This patch fixes the Makefile by using a more portable approach for
comparing the architecture revision.

Change-Id: Icb56cbecd8af5b0b9056d105970ff4a6edd1755a
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

Added assert in the code to check valid address of dtb information
structure retrieved from fw_config device tree.
This patch fixes coverity defect:360213.

Also, removed conditional calling of "fconf_populate" as "fconf_populate"
function already checks the validity of the device tree address received
and go to panic in case of address is NULL.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib83e4e84a95e2456a12c7a2bb3fe70461d882cba

The non-secure world has no business accessing the CPU power switches in
the PRCM; those are handled by TF-A or the SCP. Only allow access to the
clock control part of the PRCM.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I657b97f4ea8a0073448ad3343fbc66ba168ed89e

The .rela.dyn section is the same for BL2-AT-EL3, BL31, TSP.

Move it to the common header file.

I slightly changed the definition so that we can do "RELA_SECTION >RAM".
It still produced equivalent elf images.

Please note I got rid of '.' from the VMA field. Otherwise, if the end
of previous .data section is not 8-byte aligned, it fails to link.

aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
make: *** [Makefile:1071: build/qemu/release/bl31/bl31.elf] Error 1

Change-Id: Iba7422d99c0374d4d9e97e6fd47bae129dba5cc9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

* changes:
  plat: marvell: armada: a8k: add OP-TEE OS MMU tables
  drivers: marvell: add support for mapping the entire LLC to SRAM
  plat: marvell: armada: add LLC SRAM CCU setup for AP806/AP807 platforms
  plat: marvell: armada: reduce memory size reserved for FIP image
  plat: marvell: armada: platform definitions cleanup
  plat: marvell: armada: a8k: check CCU window state before loading MSS BL2
  drivers: marvell: add CCU driver API for window state checking
  drivers: marvell: align and extend llc macros
  plat: marvell: a8k: move address config of cp1/2 to BL2
  plat: marvell: armada: re-enable BL32_BASE definition
  plat: marvell: a8k: extend includes to take advantage of the phy_porting_layer
  marvell: comphy: initialize common phy selector for AP mode
  marvell: comphy: update rx_training procedure
  plat: marvell: armada: configure amb for all CPs
  plat: marvell: armada: modify PLAT_FAMILY name for 37xx SoCs

The plat_core_pos_by_mpidr() implementation for the Arm FPGA port has
some issues, which leads to problems when matching GICv3 redistributors
with cores:
- The power domain tree was not taking multithreading into account, so
  we ended up with the wrong mapping between MPIDRs and core IDs.
- Before even considering an MPIDR, we try to make sure Aff2 is 0.
  Unfortunately this is the cluster ID when the MT bit is set.
- We mask off the MT bit in MPIDR, before basing decisions on it.
- When detecting the MT bit, we are properly calculating the thread ID,
  but don't account for the shift in the core and cluster ID checks.

Those problems lead to early rejections of MPIDRs values, in particular
when called from the GIC code. As a result, CPU_ON for secondary cores
was failing for most of the cores.

Fix this by properly handling the MT bit in plat_core_pos_by_mpidr(),
also pulling in FPGA_MAX_PE_PER_CPU when populating the power domain
tree.

Change-Id: I71b2255fc0d27bfe5806511df479ab38e4e33fc4
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

* changes:
  doc: Update arg usage for BL2 and BL31 setup functions
  doc: Update BL1 and BL2 boot flow
  plat/arm: Use only fw_config between bl2 and bl31

Updated the porting guide for the usage of received arguments
in BL2 and BL32 setup functions in case of Arm platform.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia83a5607fed999819d25e49322b3bfb5db9425c0

Updated the document for BL1 and BL2 boot flow to capture
below changes made in FCONF

1. Loading of fw_config and tb_fw_config images by BL1.
2. Population of fw_config and tb_fw_config by BL2.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ifea5c61d520ff1de834c279ce1759b53448303ba

Passed the address of fw_config instead of soc_fw_config
as arg1 to BL31 from BL2 for ARM fvp platform.

BL31 then retrieve load-address of other device trees
from fw_config device tree.
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib7e9581cd765d76111dcc3b7e0dafc12503c83c1

* changes:
  doc: Update memory layout for firmware configuration area
  plat/arm: Increase size of firmware configuration area
  plat/arm: Load and populate fw_config and tb_fw_config
  fconf: Handle error from fconf_load_config
  plat/arm: Update the fw_config load call and populate it's information
  fconf: Allow fconf to load additional firmware configuration
  fconf: Clean confused naming between TB_FW and FW_CONFIG
  tbbr/dualroot: Add fw_config image in chain of trust
  cert_tool: Update cert_tool for fw_config image support
  fiptool: Add fw_config in FIP
  plat/arm: Rentroduce tb_fw_config device tree

Neoverse N1 erratum 1800710 is a Cat B erratum, present in older
revisions of the Neoverse N1 processor core.  The workaround is to
set a bit in the ECTLR_EL1 system register, which disables allocation
of splintered pages in the L2 TLB.

This errata is explained in this SDEN:
https://static.docs.arm.com/sden885747/f/Arm_Neoverse_N1_MP050_Software_Developer_Errata_Notice_v21.pdf

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ie5b15c8bc3235e474a06a57c3ec70684361857a6