GitLab

Fix return type of FVP plat_arm_topology_setup

Fix the return type of the FVP `plat_arm_topology_setup` function
to be `void` instead of `int` to match the declaration in
`plat_arm.h`.

This does not result in any change in behavior.

Change-Id: I62edfa7652b83bd26cffb7d167153959b38e37e7

PSCI: Set ON_PENDING state early during CPU_ON

In the debug build of the function get_power_on_target_afflvl(), there is a
check to ensure that the CPU is emerging from a SUSPEND or ON_PENDING state.
The state is checked without acquiring the lock for the CPU node. The state
could be updated to ON_PENDING in psci_afflvl_on() after the target CPU has
been powered up. This results in a race condition which could cause the
check for the ON_PENDING state in get_power_on_target_afflvl() to fail.
This patch resolves this race condition by setting the state of the target
CPU to ON_PENDING before the platform port attempts to power it on. The
target CPU is thus guaranteed to read the correct the state. In case
the power on operation fails, the state of the CPU is restored to OFF.

Fixes ARM-software/tf-issues#302

Change-Id: I3f2306a78c58d47b1a0fb7e33ab04f917a2d5044

Move up dependency versions

Move to the new ARM SCP Messaging Interfaces v2

ARM platform port reorganization

Device tree idle state bindings changed in kernel v3.18. This patch
updates the FVP DT files to use PSCI suspend as idle state.

The patch also updates the 'compatible' property in the PSCI node
and the 'entry-method' property in the idle-states node in the FVP
Foundation GICv2-legacy device tree.

Change-Id: Ie921d497c579f425c03d482f9d7b90e166106e2f

Move up the version numbers in the user guide of:

 * DS-5 (to v5.21)
 * EDK2 (to v3.0)
 * Linux Kernel (to 1.6-Juno)
 * Linaro file-system (to 15.03)
 * Juno SCP binary (to v1.7.0 within board recovery image 0.11.3).

Change-Id: Ieb09e633acc2b33823ddf35f77f44e7da60b99ba

There has been a breaking change in the communication protocols used
between the AP cores and the SCP on CSS based platforms like Juno.
This means both the AP Trusted Firmware and SCP firmware must be
updated at the same time.

In case the user forgets to update the SCP ROM firmware, this patch
detects when it still uses the previous version of the communication
protocol. It will then output a comprehensive error message that helps
trouble-shoot the issue.

Change-Id: I7baf8f05ec0b7d8df25e0ee53df61fe7be0207c2

The communication protocol used between the AP cores and the SCP
in CSS-based platforms like Juno has undergone a number of changes.
This patch makes the required modifications to the SCP Boot Protocol,
SCPI Protocol and MHU driver code in shared CSS platform code so that
the AP cores are still able to communicate with the SCP.

This patch focuses on the mandatory changes to make it work. The
design of this code needs to be improved but this will come in
a subsequent patch.

The main changes are:

 - MHU communication protocol

   - The command ID and payload size are no longer written into the
     MHU registers directly. Instead, they are stored in the payload
     area. The MHU registers are now used only as a doorbell to kick
     off messages. Same goes for any command result, the AP has to
     pick it up from the payload area.

 - SCP Boot Protocol

   - The BL3-0 image is now expected to embed a checksum. This
     checksum must be passed to the SCP, which uses it to check the
     integrity of the image it received.

   - The BL3-0 image used to be transferred a block (4KB)
     at a time. The SCP now supports receiving up to 128KB at a
     time, which is more than the size of the BL3-0 image.
     Therefore, the image is now sent in one go.

   - The command IDs have changed.

 - SCPI Protocol

   - The size of the SCPI payload has been reduced down from 512
     bytes to 256 bytes. This changes the base address of the
     AP-to-SCP payload area.

   - For commands that have a response, the response is the same SCPI
     header that was sent, except for the size and the status, which
     both must be updated appropriately. Success/Failure of a command
     is determined by looking at the updated status code.

   - Some command IDs have changed.

NOTE: THIS PATCH BREAKS COMPATIBILITY WITH FORMER VERSIONS OF THE SCP
FIRMWARE AND THUS REQUIRES AN UPDATE OF THIS BINARY. THE LATEST SCP
BINARY CAN BE OBTAINED FROM THE ARM CONNECTED COMMUNITY WEBSITE.

Change-Id: Ia5f6b95fe32401ee04a3805035748e8ef6718da7

Update the User Guide, Porting Guide and Firmware Design documents
to align them with the recent changes made to the FVP and Juno
platform ports.

Also fix some other historical inaccuracies.

Change-Id: I37aba4805f9044b1a047996d3e396c75f4a09176

Move the Juno port from plat/juno to plat/arm/board/juno. Also rename
some of the files so they are consistently prefixed with juno_.
Update the platform makefiles accordingly.

Change-Id: I0af6cb52a5fee7ef209107a1188b76a3c33a2a9f

Major update to the Juno platform port to use the common platform code
in (include/)plat/arm/* and (include/)plat/common/*. This mainly
consists of removing duplicated code but also introduces some small
behavioural changes where there was unnecessary variation between the
FVP and Juno ports. See earlier commit titled `Add common ARM and CSS
platform code` for details.

Also move the ARM SoC specific security setup (i.e. NIC-400 and PCIe
initialization) from BL1 to `plat_arm_security_setup()` in BL2,
where the other security setup is done.

Change-Id: Ic9fe01bae8ed382bfb04fc5839a4cfff332eb124

Move the FVP port from plat/fvp to plat/arm/board/fvp. Also rename
some of the files so they are consistently prefixed with fvp_.
Update the platform makefiles accordingly.

Change-Id: I7569affc3127d66405f1548fc81b878a858e61b7

Major update to the FVP platform port to use the common platform code
in (include/)plat/arm/* and (include/)plat/common/*. This mainly
consists of removing duplicated code but also introduces some small
behavioural changes where there was unnecessary variation between the
FVP and Juno ports. See earlier commit titled `Add common ARM and CSS
platform code` for details.

Also add support for Foundation FVP version 9.1 during FVP config
setup to prevent a warning being emitted in the console.

Change-Id: I254ca854987642ce09d1b924c9fd410a6e13e3bc

This major change pulls out the common functionality from the
FVP and Juno platform ports into the following categories:

*   (include/)plat/common. Common platform porting functionality that
typically may be used by all platforms.

*   (include/)plat/arm/common. Common platform porting functionality
that may be used by all ARM standard platforms. This includes all
ARM development platforms like FVP and Juno but may also include
non-ARM-owned platforms.

*   (include/)plat/arm/board/common. Common platform porting
functionality for ARM development platforms at the board
(off SoC) level.

*   (include/)plat/arm/css/common. Common platform porting
functionality at the ARM Compute SubSystem (CSS) level. Juno
is an example of a CSS-based platform.

*   (include/)plat/arm/soc/common. Common platform porting
functionality at the ARM SoC level, which is not already defined
at the ARM CSS level.

No guarantees are made about the backward compatibility of
functionality provided in (include/)plat/arm.

Also remove any unnecessary variation between the ARM development
platform ports, including:

*   Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the
Juno implementation, which copies the information from BL2 memory
instead of expecting it to persist in shared memory.

*   Unify the TZC configuration. There is no need to add a region
for SCP in Juno; it's enough to simply not allow any access to
this reserved region. Also set region 0 to provide no access by
default instead of assuming this is the case.

*   Unify the number of memory map regions required for ARM
development platforms, although the actual ranges mapped for each
platform may be different. For the FVP port, this reduces the
mapped peripheral address space.

These latter changes will only be observed when the platform ports
are migrated to use the new common platform code in subsequent
patches.

Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8

Add extern declarations of linker symbols to bl_common.h. These are
used by platform ports to determine the memory layout of BL images.
Adding the declarations to this file facilitates removal of these
declarations from the platform porting source files in subsequent
patches.

Also remove the linker symbol declarations from common TSP source
code.

Change-Id: I8ed0426bc815317c4536b588e4e78bc15b4fe91c

Update the top level makefile to allow platform ports to exist in
subdirectories at any level instead of one level under `plat/`. The
makefile recursively searches for all files called `platform.mk` in
all subdirectories of `plat/`. The directory containing
`platform.mk` is the platform name. Platform names must be unique
across the codebase.

Replace usage of HELP_PLATFORMS in the Makefile with PLATFORMS since
these are both used to report the same information back to the user.

Update the TSP and cert_create tool makefiles in a similar way
to support a deeper platform port directory structure.

Also add PLAT_<plat_name> as a define passed through the top level
makefile to the source files, to allow build time variation in common
platform code.

Change-Id: I213420164808c5ddb99a26144e8e3f141a7417b7

Separate out the common console functionality in
`drivers/arm/pl011/pl011_console.S` into a new source file
`drivers/console/console.S`. The former includes the latter to
provide backwards compatibility for platform make files.

Also add a skeleton console implementation for platforms that do not
want to use PL011.

Change-Id: I1ff963b2b54a872fbcf1eb0700797b9e9afa2538

Some assembly files containing macros are included like header files
into other assembly files. This will cause assembler errors if they
are included multiple times.

Add header guards to assembly macro files to avoid assembler errors.

Change-Id: Ia632e767ed7df7bf507b294982b8d730a6f8fe69

The required platform constant PLATFORM_CACHE_LINE_SIZE is
unnecessary since CACHE_WRITEBACK_GRANULE effectively provides the
same information. CACHE_WRITEBACK_GRANULE is preferred since this
is an architecturally defined term and allows comparison with the
corresponding hardware register value.

Replace all usage of PLATFORM_CACHE_LINE_SIZE with
CACHE_WRITEBACK_GRANULE.

Also, add a runtime assert in BL1 to check that the provided
CACHE_WRITEBACK_GRANULE matches the value provided in CTR_EL0.

Change-Id: If87286be78068424217b9f3689be358356500dcd

Commit dad25049 adds support for type checking in printf-like
functions. Some of the VERBOSE logging statements were not updated
at that time.

Fix the type mismatches in the verbose logging statements.

Change-Id: Idd9a49e41cc0dc31f7698e220819d934e3d2d10e

Region 0 is special in TZC-400. It is possible to set the access
permissions for this but not the address range or filters to which
the permissions apply. Add a function for setting the region 0
access permissions.

Also add some VERBOSE logging and allow assembly files to include
the TZC header.

Change-Id: I4389261ba10a6e5e2e43ee93d55318dc507b6648

Fix recursive crash prints on FVP AEM model

Pass arguments/results between EL3/S-EL1 via CPU registers (x0-x7) v4

Remove the ARCH build configuration from the Makefile v2

Panic if platform specific BL3-0 handling fails v2

This patch fixes an issue in the cpu specific register reporting
of FVP AEM model whereby crash reporting itself triggers an exception
thus resulting in recursive crash prints. The input to the
'size_controlled_print' in the crash reporting framework should
be a NULL terminated string. As there were no cpu specific register
to be reported on FVP AEM model, the issue was caused by passing 0
instead of NULL terminated string to the above mentioned function.

Change-Id: I664427b22b89977b389175dfde84c815f02c705a

This patch removes the need for a shared buffer between the EL3 and S-EL1
levels. We now use the CPU registers, x0-x7, while passing data between
the two levels. Since TLK is a 32-bit Trusted OS, tlkd has to unpack the
arguments in the x0-x7 registers. TLK in turn gets these values via r0-r7.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The ARCH variable, which defaults to 'aarch64', gives the wrong
impression that the Trusted Firmware can be built for other
architectures. This patch removes it. This doesn't have any
consequence on the rest of the build system because the variable
was unused.

Change-Id: I97130f11f7733a3cbdfc89989587f2ebecaf3294

The return value of bl2_plat_handle_bl30() used to be ignored.
This patch modifies the function load_bl30() so that it now
checks this return value and returns it to bl2_main().

This patch also unifies the error handling code across the
load_blx() functions so that they return a status code in all
cases and bl2_main() has the sole responsibility of panicking
if appropriate.

Change-Id: I2b26cdf65afa443b48c7da1fa7da8db956071bfb

Add support to indicate size and end of assembly functions

In order for the symbol table in the ELF file to contain the size of
functions written in assembly, it is necessary to report it to the
assembler using the .size directive.

To fulfil the above requirements, this patch introduces an 'endfunc'
macro which contains the .endfunc and .size directives. It also adds
a .func directive to the 'func' assembler macro.

The .func/.endfunc have been used so the assembler can fail if
endfunc is omitted.

Fixes ARM-Software/tf-issues#295

Change-Id: If8cb331b03d7f38fe7e3694d4de26f1075b278fc
Signed-off-by: Kévin Petit <kevin.petit@arm.com>

Optimize the bakery lock implementation

Bug Fix: Fix checkpatch rule in Makefile

TLK dispatcher

Include TLK Dispatcher's documentation and add NVIDIA to the
Acknowledgements file. TLK is now a supported Trusted OS with
the Trusted Firmware.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to open/close secure sessions with Trusted
Apps and later send commands/events. Modify TLK_NUM_FID to indicate
the total number of FIDs available to the NS world.

Change-Id: I3f1153dfa5510bd44fc25f1fee85cae475b1abf1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch allows servicing of the non-secure world IRQs when the
CPU is in the secure world. Once the interrupt is handled, the
non-secure world issues the Resume FID to allow the secure payload
complete the preempted standard FID.

Change-Id: Ia52c41adf45014ab51d8447bed6605ca2f935587
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>