Skip to content

GitLab

Switch branch/tag
  1. 11 Feb, 2019 1 commit
    • Ryan Grachek's avatar
      hikey960: enable IOMCU DMAC · c8ab47d4
      Ryan Grachek authored 
      

There exists a third DMA controller on the hi3660
SoC called the IOMCU DMAC. This controller is used by
peripherals like SPI2 and UART3. Initialize channels 4-7
as non-secure, while 0-3 remain reserved and secure.
Signed-off-by: default avatarRyan Grachek <ryan@edited.us>
      c8ab47d4
  3. 01 Feb, 2019 2 commits
  5. 31 Jan, 2019 1 commit
  7. 15 Jan, 2019 1 commit
  9. 10 Jan, 2019 2 commits
  11. 04 Jan, 2019 1 commit
    • Antonio Nino Diaz's avatar
      Sanitise includes across codebase · 09d40e0e
      Antonio Nino Diaz authored 
      Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      09d40e0e
  13. 10 Dec, 2018 1 commit
  15. 29 Nov, 2018 1 commit
  17. 26 Nov, 2018 1 commit
    • Haojian Zhuang's avatar
      hikey: remove delay after eMMC initialized · b79de2dc
      Haojian Zhuang authored 
      

commit 386b14bf64124ebf0368eab33ef07603e0c3138a
Author: Haojian Zhuang <haojian.zhuang@linaro.org>
Date:   Wed Nov 21 09:19:49 2018 +0800

    mmc: poll eMMC status after EXT_CSD command

    EXT_CSD command needs to access data from eMMC device. Add the
    operation of polling eMMC device status. Make sure the command is
    finished.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@linaro.org>

A hacked delay time can't fit each eMMC device. Since the above commit
enables the polling operation, remove the hacked delay time now.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@linaro.org>
      b79de2dc
  19. 15 Nov, 2018 1 commit
  21. 08 Nov, 2018 4 commits
  23. 01 Nov, 2018 1 commit
  25. 31 Oct, 2018 1 commit
  27. 30 Oct, 2018 1 commit
  29. 25 Oct, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Add plat_crash_console_flush to platforms without it · 9c675b37
      Antonio Nino Diaz authored 
      

Even though at this point plat_crash_console_flush is optional, it will
stop being optional in a following patch.

The console driver of warp7 doesn't support flush, so the implementation
is a placeholder.

TI had ``plat_crash_console_init`` and ``plat_crash_console_putc``, but
they weren't global so they weren't actually used. Also, they were
calling the wrong functions.

imx8_helpers.S only has placeholders for all of the functions.

Change-Id: I8d17bbf37c7dad74e134c61ceb92acb9af497718
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      9c675b37
  31. 10 Oct, 2018 1 commit
  33. 28 Sep, 2018 3 commits
  35. 27 Sep, 2018 1 commit
    • Shawn Guo's avatar
      poplar: fix build error with POPLAR_RECOVERY=1 · d5ed2946
      Shawn Guo authored 
      Commit eba1b6b3

 ("plat/poplar: migrate to mmc framework") defines
variable 'info' without !POPLAR_RECOVERY protection, and hence causes
the following unused variable error with POPLAR_RECOVERY=1 build.

plat/hisilicon/poplar/bl1_plat_setup.c: In function ‘bl1_platform_setup’:
plat/hisilicon/poplar/bl1_plat_setup.c:95:25: error: unused variable ‘info’ [-Werror=unused-variable]
  struct mmc_device_info info;
                         ^~~~

The patches fixes the build error with POPLAR_RECOVERY=1.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
      d5ed2946
  37. 26 Sep, 2018 2 commits
    • Haojian Zhuang's avatar
      hikey960: fix build issue for clang · 492a504c
      Haojian Zhuang authored 
      

plat/hisilicon/hikey960/include/plat_macros.S:19:55: error: unexpected token in
'.asciz' directive
 .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" " Offset:\t\t\tvalue\n"
                                                      ^
Makefile:720: recipe for target 'build/hikey960/debug/bl1/cortex_a53.o' failed
make: *** [build/hikey960/debug/bl1/cortex_a53.o] Error 1

Merge the two lines into one.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@linaro.org>
      492a504c
    • Haojian Zhuang's avatar
      hikey: fix build issue for clang · 00a64624
      Haojian Zhuang authored 
      

plat/hisilicon/hikey/include/plat_macros.S:19:55: error: unexpected token in '.asciz' directive
 .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" " Offset:\t\t\tvalue\n"
                                                      ^
Makefile:720: recipe for target 'build/hikey/debug/bl1/cortex_a53.o' failed
make: *** [build/hikey/debug/bl1/cortex_a53.o] Error 1

Merge two lines into one line.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@linaro.org>
      00a64624
  39. 09 Sep, 2018 1 commit
  41. 22 Aug, 2018 2 commits
  43. 10 Aug, 2018 3 commits
  45. 27 Jul, 2018 1 commit
  47. 22 Jul, 2018 1 commit
  49. 20 Jul, 2018 1 commit
  51. 06 Jul, 2018 1 commit
    • Teddy Reed's avatar
      hikey: Add development TBB support · e59a3bff
      Teddy Reed authored 
      

This patch adds experimental support for TRUSTED_BOARD_BOOT to the
Hikey. This is adapted from the RPi3 and QEMU implementations.

Since the Hikey starts from BL2 the TRUSTED_BOARD_BOOT ROT begins there
too. When TRUSTED_BOARD_BOOT is defined, the BL1 build is skipped.

See the following example:

make \
 PLAT=hikey \
 BL33=u-boot.bin \
 SCP_BL2=mcuimage.bin \
 TRUSTED_BOARD_BOOT=1 \
 MBEDTLS_DIR=../../mbedtls \
 GENERATE_COT=1 \
 all fip
Signed-off-by: default avatarTeddy Reed <teddy.reed@gmail.com>
      e59a3bff
  53. 14 Jun, 2018 1 commit
    • Roberto Vargas's avatar
      Make TF UUID RFC 4122 compliant · 03364865
      Roberto Vargas authored 
      

RFC4122 defines that fields are stored in network order (big endian),
but TF-A stores them in machine order (little endian by default in TF-A).
We cannot change the future UUIDs that are already generated, but we can store
all the bytes using arrays and modify fiptool to generate the UUIDs with
the correct byte order.

Change-Id: I97be2d3168d91f4dee7ccfafc533ea55ff33e46f
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      03364865
  55. 27 Apr, 2018 1 commit
    • Masahiro Yamada's avatar
      types: use int-ll64 for both aarch32 and aarch64 · 0a2d5b43
      Masahiro Yamada authored 
      Since commit 031dbb12

 ("AArch32: Add essential Arch helpers"),
it is difficult to use consistent format strings for printf() family
between aarch32 and aarch64.

For example, uint64_t is defined as 'unsigned long long' for aarch32
and as 'unsigned long' for aarch64.  Likewise, uintptr_t is defined
as 'unsigned int' for aarch32, and as 'unsigned long' for aarch64.

A problem typically arises when you use printf() in common code.

One solution could be, to cast the arguments to a type long enough
for both architectures.  For example, if 'val' is uint64_t type,
like this:

  printf("val = %llx\n", (unsigned long long)val);

Or, somebody may suggest to use a macro provided by <inttypes.h>,
like this:

  printf("val = %" PRIx64 "\n", val);

But, both would make the code ugly.

The solution adopted in Linux kernel is to use the same typedefs for
all architectures.  The fixed integer types in the kernel-space have
been unified into int-ll64, like follows:

    typedef signed char           int8_t;
    typedef unsigned char         uint8_t;

    typedef signed short          int16_t;
    typedef unsigned short        uint16_t;

    typedef signed int            int32_t;
    typedef unsigned int          uint32_t;

    typedef signed long long      int64_t;
    typedef unsigned long long    uint64_t;

[ Linux commit: 0c79a8e29b5fcbcbfd611daf9d500cfad8370fcf ]

This gets along with the codebase shared between 32 bit and 64 bit,
with the data model called ILP32, LP64, respectively.

The width for primitive types is defined as follows:

                   ILP32           LP64
    int            32              32
    long           32              64
    long long      64              64
    pointer        32              64

'long long' is 64 bit for both, so it is used for defining uint64_t.
'long' has the same width as pointer, so for uintptr_t.

We still need an ifdef conditional for (s)size_t.

All 64 bit architectures use "unsigned long" size_t, and most 32 bit
architectures use "unsigned int" size_t.  H8/300, S/390 are known as
exceptions; they use "unsigned long" size_t despite their architecture
is 32 bit.

One idea for simplification might be to define size_t as 'unsigned long'
across architectures, then forbid the use of "%z" string format.
However, this would cause a distortion between size_t and sizeof()
operator.  We have unknowledge about the native type of sizeof(), so
we need a guess of it anyway.  I want the following formula to always
return 1:

  __builtin_types_compatible_p(size_t, typeof(sizeof(int)))

Fortunately, ARM is probably a majority case.  As far as I know, all
32 bit ARM compilers use "unsigned int" size_t.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      0a2d5b43
  57. 24 Apr, 2018 1 commit