GitLab

* changes:
  feat(plat/marvell): introduce t9130_cex7_eval
  feat(plat/marvell/a8k): allow overriding default paths

This patch adds the necessary files to support
the SolidRun CN913X CEx7 Evaluation Board.

Because the DRAM connectivity and SerDes settings
is shared with the CN913X DB - reuse relevant
board-specific files.

Change-Id: I75a4554a4373953ca3fdf3b04c4a29c2c4f8ea80
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

The common makefile used by every a8k/cn913x platform
(a8k_common.mk) assumed default paths in PLAT_INCLUDES,
BLE/BL31_PORTING_SOURCES. Allow overriding those
variables, in order to avoid code duplication.

It can be helpful in case using multiple board variants
or sharing common settings between different platforms.

Change-Id: Idce603e44ed04d99fb1e3e11a2bb395d552e2bf7
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

* changes:
  feat(plat/allwinner): add R329 support
  refactor(plat/allwinner): allow custom BL31 offset
  refactor(plat/allwinner): allow new AA64nAA32 position
  fix(plat/allwinner): delay after enabling CPU power

Allwinner R329 is a new dual-core Corte-A53 SoC. Add basical TF-A
support for it, to provide a PSCI implementation containing CPU
boot/shutdown and SoC reset.

Change-Id: I0fa37ee9b4a8e0e1137bf7cf7d614b6ca9624bfe
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>

Not all Allwinner SoCs have the same arrangement to SRAM A2.

Allow to specify a offset at which BL31 will stay in SRAM A2.

Change-Id: I574140ffd704a796fae0a5c2d0976e85c7fcbdf9
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>

In newer Allwiner SoCs, the AA64nAA32 wires are mapped to a new register
called "General Control Register0" in the manual rather than the
"Cluster 0 Control Register0" in older SoCs.

Now the position of AA64nAA32 (reg and bit offset) is defined in a few
macros instead assumed to be at bit offset 24 of
SUNXI_CPUCFG_CLS_CTRL_REG0.

Change-Id: I933d00b9a914bf7103e3a9dadbc6d7be1a409668
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>

Adds a 1us delay after enabling power to a CPU core, to prevent
inrush-caused CPU crash before it's up.

Change-Id: I8f4c1b0dc0d1d976b31ddc30efe7a77a1619b1b3
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>

* changes:
  feat(plat/xilinx/zynqmp): add support for runtime feature config
  feat(plat/xilinx/zynqmp): sync IOCTL IDs

Add missing documentation for MSS_SUPPORT and SCP_BL2 build options used
on Marvell platforms.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I852f60569a9a49269ae296c56cc83eb438528bee

clang build breaks when both ENABLE_PAUTH (BRANCH_PROTECTOR=1)
and CRASH_REPORTING (DEBUG=1) options are enabled:

include/lib/el3_runtime/cpu_data.h:135:2: error: redefinition of typedef
'assert_cpu_data_crash_stack_offset_mismatch' is a C11 feature [-Werror,
-Wtypedef-redefinition]
        assert_cpu_data_crash_stack_offset_mismatch);
        ^
include/lib/el3_runtime/cpu_data.h:128:2: note: previous definition is here
        assert_cpu_data_crash_stack_offset_mismatch);
        ^
1 error generated.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I22c8c45a94a64620007979d55412dbb57b11b813

Cortex A78 AE erratum 1941500 is a Cat B erratum that applies
to revisions <= r0p1. It is still open.

This erratum is avoided by by setting CPUECTLR_EL1[8] to 1.
There is a small performance cost (<0.5%) for setting this
bit.

SDEN is available at https://developer.arm.com/documentation/SDEN1707912/0900



Change-Id: I2d72666468b146714a0340ba114ccf0f5165b39c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ib5f443a6997239d6ba4655d7df6c3fc61d45f991

Add support for runtime feature configuration which are running on the
 firmware. Add new IOCTL IDs like IOCTL_SET_FEATURE_CONFIG and
 IOCTL_GET_FEATURE_CONFIG for configuring the features.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I976aef15932783a25396b2adeb4c8f140cc87e79

Sync IOCTL IDs in order to avoid conflict with other components like,
 Linux and firmware. Hence assigning value to IDs to make it more
 specific.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I11ae679fbd0a953290306b62d661cc142f50dc28

after this commit: If15cf3b9d3e2e7876c40ce888f22e887893fe696
plat/qemu/common/qemu_pm.c:116:	    (entrypoint < (NS_DRAM0_BASE + NS_DRAM0_SIZE)))
the above line (NS_DRAM0_BASE + NS_DRAM0_SIZE) = 0x100000000, which will
overflow 32bit and cause ERROR
SO add ULL to fix it

tested on compiler:
gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))
Signed-off-by: Darren Liang <lwp513@qq.com>
Change-Id: I1d769b0803142d37bd2968d765ab04a9c7c5c21a

This patch adds the basic CPU library code to support the Demeter
CPU.  This CPU is based on the Makalu-ELP core so that CPU lib code
was adapted to create this patch.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ib5740b748008a72788c557f0654d8d5e9ec0bb7f

As done recently for plat/tc0 in b5863cab

, enable AMU explicitly.
This is necessary as the recent changes that enable SVE for the secure
world disable AMU by default in the CPTR_EL3 reset value.

Change-Id: Ie3abf1dee8a4e1c8c39f934da8e32d67891f5f09
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>

Now that the DDR is mapped secured, the security settings (TZC400
firewall) have to be applied at the end of BL2 for the OP-TEE case.
This is required to avoid checskum computation error on U-Boot binary,
for which MMU and TZC400 would not be aligned.

Change-Id: I4a364f7117960e8fae1b579f341b9f140b766ea6
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

Cortex A78 AE erratum 1951502 is a Cat B erratum that applies to revisions
<= r0p1. It is still open. This erratum is avoided by inserting a DMB ST
before acquire atomic instructions without release semantics through a series
of writes to implementation defined system registers.

SDEN is available at https://developer.arm.com/documentation/SDEN1707912/0900



Change-Id: I812c5a37cdd03486df8af6046d9fa988f6a0a098
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra132 platforms have reached their end of life and are
no longer used in the field. Internally and externally, all
known programs have removed support for this legacy platform.

This change removes this platform from the Tegra tree as a result.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I72edb689293e23b63290cdcaef60468b90687a5a

Most DTBs used on the RaspberryPi contain a FDT /memreserve/ region,
that covers the original secondaries' spin table.
We need to reserve more memory than described there, to cover the whole
of the TF-A image, so we add a /reserved-memory node to the DTB.

However having the same memory region described by both methods upsets
the Linux kernel and U-Boot, so we have to make sure there is only one
instance describing this reserved memory.

Keep our currently used /reserved-memory node, since it's more capable
(it allows to mark the region as secure memory). Add some code to drop
the original /memreserve/ region, since we don't need this anymore,
because we take the secondaries out of their original spin loop.

We explicitly check for the currently used size of 4KB for this region,
to be alerted by any changes to this region in the upstream DTB.

Change-Id: Ia3105560deb3f939e026f6ed715a9bbe68b56230
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Put default ea handler implementation into function plat_default_ea_handler()
which just print verbose information and panic, so it can be called also
from overwritten / weak function plat_ea_handler() implementation.

Replace every custom implementation of printing verbose error message of
external aborts in custom plat_ea_handler() functions by a common
implementation from plat_default_ea_handler() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I15897f61b62b4c3c29351e693f51d4df381f3b98

Bumps [path-parse](https://github.com/jbgutierrez/path-parse) from
1.0.6 to 1.0.7.

- [Release notes](https://github.com/jbgutierrez/path-parse/releases)
- [Commits](https://github.com/jbgutierrez/path-parse/commits/v1.0.7

)

---
updated-dependencies:
- dependency-name: path-parse
  dependency-type: indirect
...

Change-Id: Ic51c94f3c90d4eab91aeb3b477622358bf74c636
Signed-off-by: Chris Kay <chris.kay@arm.com>
Signed-off-by: dependabot[bot] <support@github.com>

* changes:
  feat(plat/rcar3): emit RPC status to DT fragment if RPC unlocked
  feat(plat/rcar3): add a DRAM size setting for M3N
  feat(plat/rcar3): update IPL and Secure Monitor Rev.3.0.0
  feat(plat/rcar3): add new board revision for Salvator-XS/H3ULCB
  feat(drivers/rcar3): ddr: add function to judge a DDR rank
  fix(drivers/rcar3): ddr: update DDR setting for H3, M3, M3N
  fix(drivers/rcar3): i2c_dvfs: fix I2C operation
  fix(drivers/rcar3): fix CPG registers redefinition
  fix(drivers/rcar3): emmc: remove CPG_CPGWPR redefinition
  fix(plat/rcar3): generate two memory nodes for larger than 2 GiB channel 0
  refactor(plat/rcar3): factor out DT memory node generation
  feat(plat/rcar3): add optional support for gzip-compressed BL33