GitLab

Make the MHU code AML specific adding a new aml_* prefix and remove the
GXBB prefix from the register names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I8f20918e29f08542bd71bd679f88e65b4efaa7d2

All the SIP/SVC related code is currently the same between GXL and GXBB.
Rename function names and register names to avoid hardcoding the GXBB
prefix.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I7e58ab68489df8d4762663fc01fb64e6899cc8bf

No need to have a special SoC-specific prefix.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I0da543e7d92d56604e79440a98027ffd9a2eaa59

The header file is shared between all the SoCs. Better avoiding
hardcoding the SoC name in the function names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I9074871bd1ed8a702c1a656e0f50f2d3c6cb0425

The efuse driver is hardcoding the GXBB prefix. No need to do that since
the driver is shared between multiple SoCs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I97691b0bbd55170d8216d301a3fc04feb8c2af2e

Fixing at the same time the related register names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ib1130d50abe6088f1c0826878d1ae454a0f23008

The code is the common directory is now generic, no need to have the SoC
prefix hardcoded in the function names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ied3a5e506b9abd4c2d6f893bafef50019bff24f1

Now that every piece is in place, the makefiles can be refactored and
slightly beautified removing useless and redundant parts.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: If74e1909df52d475cf4b0dfed819d07d3a4c85b9

The code is the same between GXBB and GXL. Move it to the common source
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I875689a6fd029971aa755fc2725217e90ed06b6c

As done already for multiple files, move the topology file to the common
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Iaca357a089593ad58c35c05c929239132249dcda

As for most of the Amlogic code, this is common between the Amlogic
SoCs. Move the code to the common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Id3f0073ff1f0b9ddbe964f80303323ee4a2f27b0

The MHU code is shared between all the supported platforms. Move it to
the common directory instead.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Iaf53122866eae85c13f772927d16836dcfa877a3

The efuse code is the same between GXL and GXBB. Move the code to common
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ie37f21d1907a36292724f1fb645a78041fe4a6b3

The platform macros are shared between all the SoCs. Move it to common
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ia04c3ffe4d7b068aa701268ed99f69995d8db92b

Now that also the SHA256 DMA driver is shared between all the SoCs, we
can have one single private platform header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I77d51915f9d8233aeceeed66ed1f491573402cfc

The SCPI code is the same between GXBB and GXL. No need to have it
replicated for each SoCs. Move it to the common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I7e416caf1e9538b3ce7702c0363ee00a054e2451

The SHA256 DMA driver can be used by multiple SoCs. Move it to the
common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I96319eeeeeebd503ef0dcb07c0e4ff6a67afeaa5

The assembly helpers are common to all the amlogic SoCs. Move the .S
file to the common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I0d8616a7ae22dbcb14848cefd0149b6bb5814ea6

Make the platform name a parameter for the source directories. Besides a
cosmetic fix, this is going to be helpful when reusing the same Makefile
for different SoCs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I307897a21800cca8ad68a5ab8972d27e9356ff2a

Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d

This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.

Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds support for Corstone-700 foundation IP, which integrates
both Cortex-M0+ and Cortex-A(Host) processors in one handy, flexible
subsystem.
This is an example implementation of Corstone-700 IP host firmware.

Cortex-M0+ will take care of boot stages 1 and 2(BL1/BL2) as well as
bringing Host out RESET. Host will start execution directly from BL32 and
then will jump to Linux.

It is an initial port and additional features are expected to be added
later.

Change-Id: I7b5c0278243d574284b777b2408375d007a7736e
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

ISB instruction was removed from the N1 1043202 Errata Workaround [1], this
fix is adding the ISB instruction back in.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I74eac7f6ad38991c36d423ad6aa44558033ad388

Driver will calculate DDR size instead of using hardcoded value
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642cf2180929965ef12bd5ae4393b2f3d0dcddde

Currently, console drivers prepend '\r' to '\n' by themselves. This is
common enough to be supported in the framework.

Add a new flag, CONSOLE_FLAG_TRANSLATE_CRLF. A driver can set this
flag to ask the framework to transform LF into CRLF instead of doing
it by itself.

Change-Id: I4f5c5887591bc0a8749a105abe62b6562eaf503b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

To provide glitchless clock to downstream logic even if clock toggles
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I728d64d0ba3b4492125bea5b0737fc83180356f1

GCC diagnostics were added to ignore array boundaries, instead
of ignoring GCC warning current code will check for array boundaries
and perform and array update only for valid elements.

Resolves: `CID 246574` `CID 246710` `CID 246651`
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I7530ecf7a1707351c6ee87e90cc3d33574088f57

SMMUv3 driver functions which are called from BL1 and BL31
currently use counter-based poll method for testing status
bits. Adding Delay Timer driver to BL1 and BL31 is required
for timeout-based implementation using timer delay functions
for SMMU and other drivers.
This patch adds new function `fvp_timer_init()` which
initialises either System level generic or SP804 timer based on
FVP_USE_SP804_TIMER build flag.
In BL2U `bl2u_early_platform_setup()` function the call to
`arm_bl2u_early_platform_setup()` (which calls
`generic_delay_timer_init()` ignoring FVP_USE_SP804_TIMER flag),
is replaced with `arm_console_boot_init()` and `fvp_timer_init()`.

Change-Id: Ifd8dcebf4019e877b9bc5641551deef77a44c0d1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>