GitLab

- Remove references to removed build options.
- Update Makefile paths.
- Migrate to bl31_early_platform_setup2().

Change-Id: I51cbf09a0297ac1ee645a959063238c9d556d8e1
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

- Remove references to removed build options.
- Remove useless include to removed file.

Change-Id: I256da4135ac0a6ff80d4f211689ab4d08436206f
Tested-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: Ida5364da1346261cf1636c6a4956a562a5c36ee7
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

- Remove references to removed build options.
- Remove support for legacy GIC driver.
- Remove support for LOAD_IMAGE_V2=0.

Change-Id: I72f8c05620bdf4a682765e6e53e2c04ca749a3d5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: Icd1cdd42afdc78895a9be6c46b414b0a155cfa63
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

It is still a placeholder, but now it is registered correctly by the
macro finish_console_register.

Change-Id: Ic78c966d9be606cbc1a53cec43ead23b32963afe
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: Ib9eebbdff6f7868e1d1b8c41761cacc7501a25bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This driver is deprecated.

Change-Id: Ic6e154a5756e779743b17a329eed4570ccc61389
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I9874883ec33dbf293f607f9779d7c56f23cb8023
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I83de2ae3e0795e6fec3c1e5b37c441b64b0c9cb6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I2d4a21a80a768bc422e9707e6d7e98d20a716275
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I8ec8b4439ca1d7606aae069c2c576a9a8b18c92c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The affected interfaces are bl31_early_platform_setup(),
sp_min_early_platform_setup() and bl2_early_platform_setup().

Change-Id: I50c01ec68bcbe97fe4e5d101bcd0f763358b8e1e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I567a406edb090ae9d109382f6874846a79dd7473
Co-authored-by: Roberto Vargas <roberto.vargas@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I2885b0d8cb9bb16da1fa96a30e46cccde434dc42
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The code of LOAD_IMAGE_V2=0 has been removed.

Change-Id: Iea03e5bebb90c66889bdb23f85c07d0c9717fffe
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I9fd8016527ad7706494f34356fdae8efacef5f72
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I40d040aa05bcbf11536a96ce59827711456b93a8
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

A compatibility script has been provided for about 2 years. Users should
have migrated to fiptool by now so remove the compat script.

Change-Id: I643e0c40a9e3fb428bad3be04a82cb431aad74dc
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Revert "sgm: increase SCP_BL2 maximum size"

drivers: mmc: Fix R2 response type definition

poplar: fix build error with POPLAR_RECOVERY=1

sgm: increase SCP_BL2 maximum size

The Poplar is broken on eMMC initialization because of commit
2a82a9c9 ("drivers: emmc: dw_mmc: Add response flag into response ID
definition").  It changes the driver behavior on response type handling
in dw_send_cmd(), because MMC_RESPONSE_R(2) and MMC_RESPONSE_R2 are
different things.  MMC core is still sending the former while we already
changed to check the latter in dw_mmc driver.

This patch fixes R2 response type in MMC core code.  It's the same
thing as what commit 94522ff7

 ("drivers: mmc: Fix R3 response type
definition") does for R3 response.

With this fix, Poplar is back to work.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Commit eba1b6b3

 ("plat/poplar: migrate to mmc framework") defines
variable 'info' without !POPLAR_RECOVERY protection, and hence causes
the following unused variable error with POPLAR_RECOVERY=1 build.

plat/hisilicon/poplar/bl1_plat_setup.c: In function ‘bl1_platform_setup’:
plat/hisilicon/poplar/bl1_plat_setup.c:95:25: error: unused variable ‘info’ [-Werror=unused-variable]
  struct mmc_device_info info;
                         ^~~~

The patches fixes the build error with POPLAR_RECOVERY=1.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

For sgm775 the SCP_BL2 build in debug mode is around 94KiB which
is higher than the maximum size for SCP_BL2.

This patch increase the maximum allowed size for SCP_BL2 to
96KiB.

Change-Id: Ibca0daadba41429301c651ae21cbba87e45ccddf
Signed-off-by: Elieva Pignat <Elieva.Pignat@arm.com>

Minor documentation fixes

Update release minor version string

Readme and Change-log updates for v1.6 release

aarch32: PAR_ADDR_MASK should explicitly use BIT_64

Change-Id: I67382383fc9d18ab57c7e51f793145cb14c6fec5
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

Change-Id: I7855c9d3de104975bf3249bdf291c428f001d07a
Signed-off-by: Joanna Farley <joanna.farley@arm.com>

PAR register used here is a 64 bit register.
On AARCH32 BIT macro is BIT_32.
PAR_ADDR_MASK should then use BIT_64 to avoid overflow.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Change-Id: Ib9a045200de4fcd00387b114cbbd006e46ad6a8b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Change-Id: Ia67a4786350c1c2ef55125cd6a318ae6d918c08e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Allwinner PMIC fixes

At the moment we have two I2C stub drivers (for the Allwinner and the
Marvell platform), which #include the actual .c driver file.
Change this into the more usual design, by renaming and moving the stub
drivers into platform specific header files and including these from the
actual driver file. The platform specific include directories make sure
the driver picks up the right header automatically.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

trusty: Fix return value of trusty_init()

BL31: Fix warning about BL32 init function