Skip to content

GitLab

Switch branch/tag
  1. 23 Jul, 2021 1 commit
    • Ming Huang's avatar
      fix(gicv3): add dsb in both disable and enable function of gicv3_cpuif · 5a5e0aac
      Ming Huang authored 
      

A RAS error may be triggered while offline core in OS. Error:
Uncorrected software error in the Distributor, with IERR=9,SERR=f.
Core put to sleep before its Group enables were cleared.

gicv3_cpuif_disable() will be called in offline core flow.
According to GIC architecture version 3 and version 4:
Architectural execution of a DSB instruction guarantees that
the last value written to ICC_IGRPEN0_EL1, ICC_IGRPEN1_EL1,
ICC_IGRPEN1_EL3 or GICC_CTLR.{EnableGrp0, EnableGrp1}is observed
by the associated Redistributor.
An ISB or other context synchronization operation must precede
the DSB to ensure visibility of System register writes.
Signed-off-by: default avatarMing Huang <huangming@linux.alibaba.com>
Change-Id: Iff1475657f401374c761b5e8f2f5b3a4b2040e9d
      5a5e0aac
  3. 22 Jul, 2021 2 commits
  5. 15 Jul, 2021 1 commit
  7. 05 Jul, 2021 4 commits
  9. 01 Jul, 2021 1 commit
    • Sandrine Bailleux's avatar
      refactor(measured boot): remove weak definition of plat_get_measured_boot_data() · c04cb15c
      Sandrine Bailleux authored 
      

Weak definitions are confusing and should be avoided if possible.
Thus, turn plat_get_measured_boot_data() into a strong definition that
platforms must provide (if they need measured boot).

We could have moved the old weak implementation under plat/common as a
sane, default implementation that platforms may pull in if it suits
them. However, this implementation right now simply measures BL2,
which is not enough to get a complete measured boot flow, so this
patch just removes it.

This change only affects the Arm FVP platform, as no other upstream
platform implements measured boot at the moment.

Change-Id: If8680a39ae0ef1044ee981315439d5e0c8461229
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      c04cb15c
  11. 22 Jun, 2021 5 commits
  13. 16 Jun, 2021 2 commits
  15. 08 Jun, 2021 2 commits
  17. 04 Jun, 2021 5 commits
    • Yann Gautier's avatar
      fix(io_stm32image): invalidate cache on local buf · a5bcf824
      Yann Gautier authored 
      

When retrieving data from stm32 image file, the header is removed with
a memcpy that shifts the data to overwrite the useless header for next
binary.

STM32 binary from boot device:
|-------------------------------------|
| header | payload                    |
|-------------------------------------|

After the memcpy:
|-------------------------------------|
| payload                    | remain |
|-------------------------------------|

But the remaining data after the shifted payload is still in
the cache. As it is of no use for anyone, just invalidate the cache
at this address.
This is required if the DDR is mapped secure in BL2, and the secure
access is forbidden in BL33, or else TZC-400 issues an error.

Change-Id: Ice2af3b1ca49eccb79bfc62db60437e259d344ca
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      a5bcf824
    • Yann Gautier's avatar
      refactor(io_stm32image): add header size variable · b6561c12
      Yann Gautier authored 
      

A variable hdr_sz is created in stm32image_partition_read() function.
It just represents the size of the stm32 image header but it really
improves the readability of the function.

Change-Id: I95ec62a78a4b6c6a75b0d8c8aa0faef8bee424da
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      b6561c12
    • Nicolas Le Bayon's avatar
      fix(io_stm32image): uninitialized variable warning · c1d732d0
      Nicolas Le Bayon authored 
      

Fixes implementation against build warning reported by GCC:

drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:6: error: ‘result’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
  int result;
      ^~~~~~

Actually, by construction the current implementation of function
stm32image_partition_read() does not mandate result to be initialized
since it always reaches the exit point with a valid value in 'result'.
Yet, this change prevents compiler from complaining and is more robust
against future changes in the implementation.

Change-Id: I383575edb605b7535398952a5fdfc266c0068c71
Signed-off-by: default avatarEtienne Carriere <etienne.carriere@st.com>
Signed-off-by: default avatarNicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      c1d732d0
    • Vyacheslav Yurkov's avatar
      feat(drivers/st): manage boot part in io_mmc · f3d2750a
      Vyacheslav Yurkov authored 
      

Use dedicated read function for boot partition
Signed-off-by: default avatarVyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: If75df7691fce0797205365736fc6e4e3429efdca
      f3d2750a
    • Vyacheslav Yurkov's avatar
      feat(drivers/mmc): boot partition read support · 5014b52d
      Vyacheslav Yurkov authored 
      

Added a public function to read blocks from a current boot partition.
switch between partitions has to respect eMMC partition switch timing.
Signed-off-by: default avatarVyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I55b0c910314253e5647486609583fd290dadd30a
      5014b52d
  19. 02 Jun, 2021 1 commit
    • Pali Rohár's avatar
      fix(plat/marvell/a3720/uart): fix UART parent clock rate determination · 5a91c439
      Pali Rohár authored 
      

The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).

The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.

Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
      5a91c439
  21. 01 Jun, 2021 2 commits
    • Guo Yi's avatar
      fix(plat/marvell/armada): select correct pcie reference clock source · 371648e1
      Guo Yi authored 
      

when comphy is in pcie mode, correct reference clock need be
selected according to SAR register that reflect the CPx_MPP boot
strapping pins. Either from external or from internal
Signed-off-by: default avatarGuo Yi <yguo@cavium.com>
Reviewed-by: default avatarKostya Porotchkin <kostap@marvell.com>
Change-Id: I99ed64a141e85174cc0f8e9dab5886ab2506efa1
      371648e1
    • Pali Rohár's avatar
      fix(plat/marvell/a3720/uart): fix configuring UART clock · b9185c75
      Pali Rohár authored 
      

When configuring the UART_BAUD_REG register, the function
console_a3700_core_init() currently only changes the baud divisor field,
leaving other fields to their previous value.

This is incorrect, because the baud divisor is computed with the
assumption that the parent clock rate is 25 MHz, and since the other
fields in this register configure the parent clock, which could have
been changed by U-Boot or Linux.

Fix this function to also configure the other fields so that the UART
parent clock is selected to be the xtal clock.

For example without this change TF-A prints only

    ERROR: a3700_system_off needs to be implemented

followed by garbage after plat_crash_console_init() is called.

After applying this change instead of garbage it also print crash info:

    PANIC at PC : 0x0000000004023800
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I72f338355cc60d939b8bb978d9c7fdd576416b81
      b9185c75
  23. 28 May, 2021 1 commit
    • Pali Rohár's avatar
      fix(plat/marvell/a3720/uart): fix UART clock rate value and divisor calculation · 66a77528
      Pali Rohár authored 
      

UART parent clock is by default the platform's xtal clock, which is
25 MHz.

The value defined in the driver, though, is 25.8048 MHz. This is a hack
for the suboptimal divisor calculation
  Divisor = UART clock / (16 * baudrate)
which does not use rounding division, resulting in a suboptimal value
for divisor if the correct parent clock rate was used.

Change the code for divisor calculation to
  Divisor = Round(UART clock / (16 * baudrate))
and change the parent clock rate value to 25 MHz.

The final UART divisor for default baudrate 115200 is not affected by
this change.

(Note that the parent clock rate should not be defined via a macro,
since the xtal clock can also be 40 MHz. This is outside of the scope of
this fix, though.)
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6
      66a77528
  25. 27 Apr, 2021 1 commit
    • Manish V Badarkhe's avatar
      fix(driver/auth): avoid NV counter upgrade without certificate validation · a2a5a945
      Manish V Badarkhe authored 
      

Platform NV counter get updated (if cert NV counter > plat NV counter)
before authenticating the certificate if the platform specifies NV
counter method before signature authentication in its CoT, and this
provides an opportunity for a tempered certificate to upgrade the
platform NV counter. This is theoretical issue, as in practice none
of the standard CoT (TBBR, dualroot) or upstream platforms ones (NXP)
exercised this issue.

To fix this issue, modified the auth_nvctr method to do only NV
counter check, and flags if the NV counter upgrade is needed or not.
Then ensured that the platform NV counter gets upgraded with the NV
counter value from the certificate only after that certificate gets
authenticated.

This change is verified manually by modifying the CoT that specifies
certificate with:
1. NV counter authentication before signature authentication
   method
2. NV counter authentication method only

Change-Id: I1ad17f1a911fb1035a1a60976cc26b2965b05166
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      a2a5a945
  27. 20 Apr, 2021 12 commits