GitLab

This patch fixes the "Recursion in included headers" error flagged by
Coverity.

Fixes coverity errors "31858: Recursion in included headers" and
"31857: Recursion in included headers"

Change-Id: Icf8838434b1808b396e743e47f59adc452546364
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled

Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to save the BL31 state to the TZDRAM
before entering system suspend. The TZRAM loses state during
system suspend and so we need to copy the entire BL31 code to
TZDRAM before entering the state.

In order to restore the state on exiting system suspend, a new
CPU reset handler is implemented which gets copied to TZDRAM
during boot. TO keep things simple we use this same reset handler
for booting secondary CPUs too.

Change-Id: I770f799c255d22279b5cdb9b4d587d3a4c54fad7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch reprograms MSS to make ROC deal with ordering of
MC traffic after boot and system suspend exit. This is needed
as device boots with MSS having all control but POR wants ROC
to deal with the ordering. Performance is expected to improve
with ROC but since no one has really tested the performance,
keep the option configurable for now by introducing a platform
level makefile variable.

Change-Id: I2e782fea138ccf9d281eb043a6b2c3bb97c839a7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.

Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The memory controller loses its settings when the device enters system
suspend state.

This patch adds a handler to restore the Video Memory settings in the
memory controller, which would be called after exiting the system suspend
state.

Change-Id: I1ac12426d7290ac1452983d3c9e05fabbf3327fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a device driver for the SMMU hardware block on
Tegra186 SoCs. We use the generic ARM SMMU-500 IP block on
Tegra186. The driver only supports saving the SMMU settings
before entering system suspend. The MC driver and the NS world
clients take care of programming their own settings.

Change-Id: Iab5a90310ee10f6bc8745451ce50952ab3de7188
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch registers all the FIQ interrupt sources during platform
setup. Currently we support AON and TOP watchdog timer interrupts.

Change-Id: Ibccd866f00d6b08b574f765538525f95b49c5549
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch sets the Memory Controller's TXN_OVERRIDE registers
for most write clients to CGID_ADR. This ensures ordering is maintained.
In some cases WAW ordering problems could occur. There are different
settings for Tegra version A01 v A02.

Original changes by Alex Waterman <alexw@nvidia.com>

Change-Id: I82ea02afa43a24250ed56985757b83e78e71178c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the C6 and C7 CPU_SUSPEND states. C6 is
an idle state while C7 is a powerdown state.

The MCE block takes care of the entry/exit to/from these core power
states and hence we call the corresponding MCE handler to process
these requests. The NS driver passes the tentative time that the
core is expected to stay in this state as part of the power_state
parameter, which we store in a per-cpu array and pass it to the
MCE block.

Change-Id: I152acb11ab93d91fb866da2129b1795843dfa39b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch programs the Memory controller's control registers
to disable non-secure accesses to the TZRAM. In case these
registers are already programmed by the BL2/BL30, then the
driver just bails out.

Change-Id: Ia1416988050e3d067296373060c717a260499122
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the newer platform handler functions. Commit
I6db74b020b141048b6b8c03e1bef7ed8f72fd75b merges the upstream code which
has already moved all the upstream supported platforms over to these
handler functions.

Change-Id: I621eff038f3c0dc1b90793edcd4dd7c71b196045
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186 is the newest SoC in the Tegra family which consists
of two CPU clusters - Denver and A57. The Denver cluster hosts
two next gen Denver15 CPUs while the A57 cluster hosts four ARM
Cortex-A57 CPUs. Unlike previous Tegra generations, all the six
cores on this SoC would be available to the system at the same
time and individual clusters can be powered down to conserve
power.

Change-Id: Id0c9919dbf5186d2938603e0b11e821b5892985e
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds driver for the Memory Controller (v2) in the newer
Tegra SoCs. The newer hardware uses ARM's SMMU hardware instead of
the proprietary block in the past.

Change-Id: I78359da780dc840213b6e99954e45e34428d4fff
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch opens up the interfaces to read the chip's major/minor versions
for all Tegra drivers to use.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch increases the ADDR_SPACE_SIZE macro (virtual address)
to 35 bits, to support max memory of 32G, for all Tegra platforms.

Change-Id: I8e6861601d3a667d7428988c7596b0adebfa0548
Signed-off-by: Steven kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch uses GICD_BASE to calculate the GICD_ISPENDR regsiter address
in the platform's 'plat_crash_print_regs' routine.

Reported by: Seth Eatinger <seatinger@nvidia.com>

Change-Id: Ic7be29abc781f475ad25b59582ae60a0a2497377
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to identify the underlying platform
on which we are running. The currently supported platforms
are actual silicon and simulation platforms.

Change-Id: Iadf96e79ec663b3dbd1a18e9bb95ffcdb82fc8af
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements handlers which platforms can override to
get the BL31 arguments passed by the previous bootloader.

Change-Id: I6b9628a984644ce1b5de5aa6d7cd890e57241d89
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch modifies the secure IRQ registration process to allow platforms
to specify the target CPUs as well as the owner of the IRQ. IRQs "owned"
by the EL3 would return INTR_TYPE_EL3 whereas those owned by the Trusted
OS would return INTR_TYPE_S_EL1 as a result.

Change-Id: I528f7c8220d0ae0c0f354e78d69e188abb666ef6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a handler for FIQ interrupts triggered when
the CPU is in the NS world. The handler stores the NS world's
context along with ELR_EL3/SPSR_EL3.

The NS world driver issues an SMC initially to register it's
handler. The monitor firmware stores this handler address and
jumps to it when the FIQ interrupt fires. Upon entry into the
NS world the driver then issues another SMC to get the CPU
context when the FIQ fired. This allows the NS world driver to
determine the CPU state and call stack when the interrupt
fired. Generally, systems register watchdog interrupts as FIQs
which are then used to get the CPU state during hangs/crashes.

Change-Id: I733af61a08d1318c75acedbe9569a758744edd0c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra chips support multiple FIQ interrupt sources. These interrupts
are enabled in the GICD/GICC interfaces by the tegra_gic driver. A
new FIQ handler would be added in a subsequent change which can be
registered by the platform code.

This patch adds the GIC programming as part of the tegra_gic_setup()
which now takes an array of all the FIQ interrupts to be enabled for
the platform. The Tegra132 and Tegra210 platforms right now do not
register for any FIQ interrupts themselves, but will definitely use
this support in the future.

Change-Id: I0ea164be901cd6681167028fea0567399f18d4b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a weak handler for early platform setup which
can be overriden by the soc-specific handlers to perform any
early setup tasks.

Change-Id: I1a7a98d59b2332a3030c6dca5a9b7be977177326
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch increases the BL31 image size for all Tegra platforms to
256KB, so that we can relocate BL31 to TZSRAM on supported chips.

Change-Id: I467063c68632b53b5d4ef8ff1f76f5988096bd9c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch uses the Memory controller driver's handler to restore
its settings and moves the other chip specific code to their own
'pwr_domain_on_finish' handlers.

Change-Id: I3c9d23bdab9e2e3c05034ff6812cf941ccd7a75e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The platform power states, PLAT_MAX_RET_STATE and PLAT_MAX_OFF_STATE,
can change on Tegra SoCs and so should be defined per-soc.

This patch moves these macro definitions to individual SoC's tegra_def.h
files.

Change-Id: Ib9b2752bc4d79cef6f79bee49882d340f71977a2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch introduces a function to secure the on-chip TZRAM memory. The
Tegra132 and Tegra210 chips do not have a compelling use case to lock the
TZRAM. The trusted OS owns the TZRAM aperture on these chips and so it
can take care of locking the aperture. This might not be true for future
chips and this patch makes the TZRAM programming flexible.

Change-Id: I3ac9f1de1b792ccd23d4ded274784bbab2ea224a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The BL2 fills in the UART controller ID to be used as the normal as
well as the crash console on Tegra platforms. The controller ID to
UART controller base address mapping is handled by each Tegra SoC
the base addresses might change across Tegra chips.

This patch adds the handler to parse the platform params to get the
UART ID for the per-soc handlers.

Change-Id: I4d167b20a59aaf52a31e2a8edf94d8d6f89598fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds another member, tzdram_base, to the plat_params_from_bl2 struct
in order to store the TZDRAM carveout base address used to load the Trusted OS.
The monitor programs the memory controller with the TZDRAM base and size in order
to deny any accesses from the NS world.

Change-Id: If39b8674d548175d7ccb6525c18d196ae8a8506c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch renames the current Memory Controller driver files to
"_v1". This is done to add a driver for the new Memory Controller
hardware (v2).

Change-Id: I668dbba42f6ee0db2f59a7103f0ae7e1d4684ecf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables the processor retention and L2/CPUECTLR read/write
access from the NS world only for Cortex-A57 CPUs on the Tegra SoCs.

Change-Id: I9941a67686ea149cb95d80716fa1d03645325445
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves these address translation helper macros to individual
Tegra SoC makefiles to provide more control.

Change-Id: Ieab53c457c73747bd0deb250459befb5b7b9363f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

One nasty part of ATF is some of boolean macros are always defined
as 1 or 0, and the rest of them are only defined under certain
conditions.

For the former group, "#if FOO" or "#if !FOO" must be used because
"#ifdef FOO" is always true.  (Options passed by $(call add_define,)
are the cases.)

For the latter, "#ifdef FOO" or "#ifndef FOO" should be used because
checking the value of an undefined macro is strange.

Here, IMAGE_BL* is handled by make_helpers/build_macro.mk like
follows:

  $(eval IMAGE := IMAGE_BL$(call uppercase,$(3)))

  $(OBJ): $(2)
          @echo "  CC      $$<"
          $$(Q)$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -D$(IMAGE) -c $$< -o $$@

This means, IMAGE_BL* is defined when building the corresponding
image, but *undefined* for the other images.

So, IMAGE_BL* belongs to the latter group where we should use #ifdef
or #ifndef.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Replaced plat_get_syscnt_freq by plat_get_syscnt_freq2 on all
upstream platforms.

Change-Id: I3248f3f65a16dc5e9720012a05c35b9e3ba6abbe

This patch moves the definition for `plat_get_syscnt_freq()`
from arm_bl31_setup.c to arm_common.c. This could be useful
in case a delay timer needs to be installed based on the
generic timer in other BLs.
This patch also modifies the return type for this function
from `uint64_t` to `unsigned long long` within ARM and other
platform files.

Change-Id: Iccdfa811948e660d4fdcaae60ad1d700e4eda80d

It is up to the platform to implement the new plat_crash_print_regs macro to
report all relevant platform registers helpful for troubleshooting.

plat_crash_print_regs merges or calls previously defined plat_print_gic_regs
and plat_print_interconnect_regs macros for each existing platforms.

NOTE: THIS COMMIT REQUIRES ALL PLATFORMS THAT ENABLE THE `CRASH_REPORTING`
BUILD FLAG TO MIGRATE TO USE THE NEW `plat_crash_print_regs()` MACRO. BY
DEFAULT, `CRASH_REPORTING` IS ENABLED IN DEBUG BUILDS FOR ALL PLATFORMS.

Fixes: arm-software/tf-issues#373
Signed-off-by: Gerald Lejeune <gerald.lejeune@st.com>

The debug prints used to debug translation table setup in xlat_tables.c
used the `printf()` standard library function instead of the stack
optimized `tf_printf()` API. DEBUG_XLAT_TABLE option was used to enable
debug logs within xlat_tables.c and it configured a much larger stack
size for the platform in case it was enabled. This patch modifies these
debug prints within xlat_tables.c to use tf_printf() and modifies the format
specifiers to be compatible with tf_printf(). The debug prints are now enabled
if the VERBOSE prints are enabled in Trusted Firmware via LOG_LEVEL build
option.

The much larger stack size definition when DEBUG_XLAT_TABLE is defined
is no longer required and the platform ports are modified to remove this
stack size definition.

Change-Id: I2f7d77ea12a04b827fa15e2adc3125b1175e4c23

The `plat/nvidia/tegra/include/tegra_private.h` file uses resources
from psci.h (for example, psci_power_state_t) but does not explicitly
include psci.h. This does not currently cause a problem since psci.h
is indirectly included via other headers. However, this may not be
the case in future.

This patch explicitly includes psci.h from tegra_private.h

Change-Id: Ia991147898dbd117c1d3496a95850995a5554c05

This patch modifies the Tegra port to support the new platform
APIs so that we can disable the compat layer. This includes
modifications to the power management and platform topology code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch renames the tegra_fc_cpu_idle() function to a more appropriate
tegra_fc_cpu_powerdn() to better reflect its usage.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>