GitLab

Change-Id: I43e452c9993a8608b20ec029562982f5dcf8e6b2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

We have noticed that Phabricator (the ticketing system on tf.org [1])
has far less visibility within the community than the mailing list [2].
For this reason, let's drop usage of Phabricator for anything else than
bug reports. For the rest, advise contributors to start a discussion on
the mailing list, where they are more likely to get feedback.

[1] https://developer.trustedfirmware.org/project/board/1/
[2] https://lists.trustedfirmware.org/mailman/listinfo/tf-a



Change-Id: I7d2d3d305ad0a0f8aacc2a2f25eb5ff429853a3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

* changes:
  docs: marvell: update PHY porting layer description
  docs: marvell: update path in marvell documentation
  docs: marvell: update build instructions with CN913x
  plat: marvell: octeontx: add support for t9130
  plat: marvell: t9130: add SVC support
  plat: marvell: t9130: update AVS settings
  plat: marvell: t9130: pass actual CP count for load_image
  plat: marvell: armada: a7k: add support to SVC validation mode
  plat: marvell: armada: add support for twin-die combined memory device

This patch fixes the bug when AMUv1 group1 counters was
always assumed being implemented without checking for its
presence which was causing exception otherwise.
The AMU extension code was also modified as listed below:
- Added detection of AMUv1 for ARMv8.6
- 'PLAT_AMU_GROUP1_NR_COUNTERS' build option is removed and
number of group1 counters 'AMU_GROUP1_NR_COUNTERS' is now
calculated based on 'AMU_GROUP1_COUNTERS_MASK' value
- Added bit fields definitions and access functions for
AMCFGR_EL0/AMCFGR and AMCGCR_EL0/AMCGCR registers
- Unification of amu.c Aarch64 and Aarch32 source files
- Bug fixes and TF-A coding style compliant changes.

Change-Id: I14e407be62c3026ebc674ec7045e240ccb71e1fb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

BL31 binary size is aligned to 4KB because of the
code in include\plat\arm\common\arm_reclaim_init.ld.S:
    __INIT_CODE_UNALIGNED__ = .;
    . = ALIGN(PAGE_SIZE);
    __INIT_CODE_END__ = .;
with all the zero data after the last instruction of
BL31 code to the end of the page.
This causes increase in size of BL31 binary stored in FIP
and its loading time by BL2.
This patch reduces the size of BL31 image by moving
page alignment from __INIT_CODE_END__ to __STACKS_END__
which also increases the stack size for secondary CPUs.

Change-Id: Ie2ec503fc774c22c12ec506d74fd3ef2b0b183a9
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Adding support for QTI CHIP SC7180 on ATF

Change-Id: I0d82d3a378036003fbd0bc4784f61464bb76ea82
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Co-authored-by: Maulik Shah <mkshah@codeaurora.org>

MISRA defect cleanup and general code cleanup in mem_region.c and
semihosting.c.  This task also called for cleanup of the ARM NOR flash
driver but that was removed at some point since the Jira task was
created.  This patch fixes all MISRA defects in these files except for a
few "Calling function "console_flush()" which returns error information
without testing the error information." errors which can't really be
avoided.

Defects Fixed

File                           Line Rule
lib/semihosting/semihosting.c  70   MISRA C-2012 Rule 14.4 (required)
lib/semihosting/semihosting.c  197  MISRA C-2012 Rule 14.3 (required)
lib/semihosting/semihosting.c  210  MISRA C-2012 Rule 14.4 (required)
lib/utils/mem_region.c         128  MISRA C-2012 Rule 12.1 (advisory)
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I21a039d1cfccd6aa4301da09daec15e373305a80

Change-Id: If82aaba9f2a5a74cfb5e4381f968166037a70037
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I5fd697fee22df151e13d0f1335e8ac8a7bae6189

* changes:
  docs: qemu: bump to QEMU 5.0.0
  docs: qemu: remove unneeded root=/dev/vda2 kernel parameter
  docs: qemu: add build instructions for QEMU_EFI.fd and rootfs.cpio.gz

If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.

This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8

Merge "spm-mm: fix MISRA C-2012 Rule 2.3 spm_mm_boot_info_t defined but never used." into integration

These broken links were found with the help of this command:
$> sphinx-build -M linkcheck . build

A sample broken link is reported as follows:
(line   80) -local-   firmware-design.rst#secure-el1-payloads-and-dispatchers

Change-Id: I5dcefdd4b8040908658115647e957f6c2c5da7c2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

This patch fixes BL31 linker error
 "relocation R_AARCH64_ABS32 against `a local symbol'
 can not be used when making a shared object"
when Position Independent Executable (PIE) support
is enabled with ENABLE_PIE=1 build option.

Change-Id: I2692269676db3f3b27eed499fc029fffb67969be
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Currently only single signing domain is supported for SP packages but
there is plan to support dual signing domains if CoT is dualroot.

SP_CONTENT_CERT_ID is the certificate file which is currently generated
and signed with trusted world key which in-turn is derived from Silicon
provider RoT key.
To allow dual signing domain for SP packages, other certificate file
will be derived from Platform owned RoT key.

This patch renames "SP_CONTENT_CERT_ID" to "SIP_SP_CONTENT_CERT_ID" and
does other related changes.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I0bc445a3ab257e2dac03faa64f46e36a9fed5e93

Following merge of patchset [1] the spm_mm_boot_info_t structure is
included in few platform files unconditionally even when SPM_MM option
is disabled.

[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/2647

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I68bc034c9348b5d9bcfd2e5217b781df5ad1b369

- Add basic platform setup
- Add mt8192 documentation at docs/plat/
- Add generic CPU helper functions
- Add basic register address

Change-Id: Ife34622105404a8227441aab939e3c55c96374e9
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>

The command line for BL33 payloads is typically taken from the DTB. On
"normal" systems the bootloader will put the right version in there, but
we typically don't use one on the FPGAs.
To avoid editing (and possibly re-packaging) the DTB for every change in
the command line, try to read it from some "magic" memory location
instead. It can be easily placed there by the tool that uploads the
other payloads to the FPGA's memory. BL31 will then replace the existing
command line in the DTB with that new string.

To avoid reading garbage, check the memory location for containing a
magic value. This is conveniently chosen to be a simple ASCII string, so
it can just preceed the actual command line in a text file:
--------------------------------
CMD:console=ttyAMA0,38400n8 debug loglevel=8
--------------------------------

Change-Id: I5923a80332c9fac3b4afd1a6aaa321233d0f60da
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.

Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb

Openssl directory path is hardcoded to '/usr' in the makefile
of certificate generation and firmware encryption tool using
'OPENSSL_DIR' variable.

Hence changes are done to make 'OPENSSL_DIR' variable as
a build option so that user can provide openssl directory
path while building the certificate generation and firmware
encryption tool.

Also, updated the document for this newly created build option

Change-Id: Ib1538370d2c59263417f5db3746d1087ee1c1339
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

The purpose of rx_training had changed after last update. Currently it
is not supposed to help with providing static parameters for porting
layer. Instead, it aims to suit the parameters per connection.

Change-Id: I2a146b71e2e20bd264c090a9a627d0b6bc56e052
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change-Id: I0cebbaa900aa518700f13cbf02f8a97e0c76b21c
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>