Skip to content

GitLab

Switch branch/tag
  1. 20 Feb, 2020 10 commits
  3. 18 Feb, 2020 2 commits
    • Vijayenthiran Subramaniam's avatar
      board/rdn1edge: use CREATE_SEQ helper macro to compare chip count · 9b229b44
      Vijayenthiran Subramaniam authored 
      

Use CREATE_SEQ helper macro to create sequence of valid chip counts
instead of manually creating the sequence. This allows a scalable
approach to increase the valid chip count sequence in the future.

Change-Id: I5ca7a00460325c156b9e9e52b2bf656a2e43f82d
Signed-off-by: default avatarVijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
      9b229b44
    • Alexei Fedorov's avatar
      FVP: Fix BL31 load address and image size for RESET_TO_BL31=1 · 6227cca9
      Alexei Fedorov authored 
      

When TF-A is built with RESET_TO_BL31=1 option, BL31 is the
first image to be run and should have all the memory allocated
to it except for the memory reserved for Shared RAM at the start
of Trusted SRAM.
This patch fixes FVP BL31 load address and its image size for
RESET_TO_BL31=1 option. BL31 startup address should be set to
0x400_1000 and its maximum image size to the size of Trusted SRAM
minus the first 4KB of shared memory.
Loading BL31 at 0x0402_0000 as it is currently stated in
'\docs\plat\arm\fvp\index.rst' causes EL3 exception when the
image size gets increased (i.e. building with LOG_LEVEL=50)
but doesn't exceed 0x3B000 not causing build error.

Change-Id: Ie450baaf247f1577112f8d143b24e76c39d33e91
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      6227cca9
  5. 17 Feb, 2020 3 commits
    • Vishnu Banavath's avatar
      corstone700: set UART clocks to 32MHz · 6aa138de
      Vishnu Banavath authored 
      

Adding support for 32MHz UART clock and selecting it as the
default UART clock

Change-Id: I9541eaff70424e85a3b5ee4820ca0e7efb040d2c
Signed-off-by: default avatarVishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: default avatarAbdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
      6aa138de
    • Avinash Mehta's avatar
      corstone700: clean-up as per coding style guide · 93cf1f64
      Avinash Mehta authored 
      

Running checkpatch.pl on the codebase and making required changes

Change-Id: I7d3f8764cef632ab2a6d3c355c68f590440b85b8
Signed-off-by: default avatarAvinash Mehta <avinash.mehta@arm.com>
Signed-off-by: default avatarAbdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
      93cf1f64
    • Khandelwal's avatar
      Corstone700: add support for mhuv2 in arm TF-A · c6fe43b7
      Khandelwal authored 
      

Note: This patch implements in-band messaging protocol only.
ARM has launched a next version of MHU i.e. MHUv2 with its latest
subsystems. The main change is that the MHUv2 is now a distributed IP
with different peripheral views (registers) for the sender and receiver.

Another main difference is that MHUv1 duplex channels are now split into
simplex/half duplex in MHUv2. MHUv2 has a configurable number of
communication channels. There is a capability register (MSG_NO_CAP) to
find out how many channels are available in a system.

The register offsets have also changed for STAT, SET & CLEAR registers
from 0x0, 0x8 & 0x10 in MHUv1 to 0x0, 0xC & 0x8 in MHUv2 respectively.

0x0    0x4  0x8  0xC             0x1F
------------------------....-----
| STAT |    |    | SET |    |   |
------------------------....-----
      Transmit Channel

0x0    0x4  0x8   0xC            0x1F
------------------------....-----
| STAT |    | CLR |    |    |   |
------------------------....-----
        Receive Channel

The MHU controller can request the receiver to wake-up and once the
request is removed, the receiver may go back to sleep, but the MHU
itself does not actively put a receiver to sleep.

So, in order to wake-up the receiver when the sender wants to send data,
the sender has to set ACCESS_REQUEST register first in order to wake-up
receiver, state of which can be detected using ACCESS_READY register.
ACCESS_REQUEST has an offset of 0xF88 & ACCESS_READY has an offset
of 0xF8C and are accessible only on any sender channel.

This patch adds necessary changes in a new file required to support the
latest MHUv2 controller. This patch also needs an update in DT binding
for ARM MHUv2 as we need a second register base (tx base) which would
be used as the send channel base.

Change-Id: I1455e08b3d88671a191c558790c503eabe07a8e6
Signed-off-by: default avatarTushar Khandelwal <tushar.khandelwal@arm.com>
      c6fe43b7
  7. 15 Feb, 2020 4 commits
  9. 13 Feb, 2020 1 commit
  11. 12 Feb, 2020 11 commits
  13. 11 Feb, 2020 1 commit
  15. 10 Feb, 2020 3 commits
  17. 07 Feb, 2020 5 commits