GitLab

We don't ever expect to load a binary with an STM32 header on the Arm
FVP platform so remove this type of image from the list of
measurements.

Also remove the GPT image type from the list, as it does not get
measured. GPT is a container, just like FIP is. We don't measure the FIP
but rather the images inside it. It would seem logical to treat GPT the
same way.

Besides, only images that get loaded through load_auth_image() get
measured right now. GPT processing happens before that and is handled in
a different way (see partition_init()).

Change-Id: Iac4de75380ed625b228e69ee4564cf9e67e19336
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Fix a remainder from early prototyping. OP-TEE as a secure partition
does not need specific SMC function id pass through to EL3.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2843d1b9a5eb4c966f82790e1655fb569c2de7d4

The UUID strings used in FW_CONFIG DT are not aligned with UUIDs defined
in include/tools_share/firmware_image_package.h for BL32_EXTRA1 and
TRUSTED_KEY_CERT.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I517f8f9311585931f2cb931e0588414da449b694

Morello exhibits the behavior similar to Juno wherein CNTBaseN.CNTFRQ
can be written but does not reflect the value of the CNTFRQ register
in CNTCTLBase frame. This doesn't follow ARM ARM in that the value
updated in CNTCTLBase.CNTFRQ is not reflected in CNTBaseN.CNTFRQ.

Hence enable the workaround (applied to Juno) for Morello that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.

Change-Id: Iabe53bf3c25152052107e08321323e4bde5fbef4
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>

This patch renames the Matterhorn, Matterhorn ELP, and Klein CPUs to
Cortex A710, Cortex X2, and Cortex A510 respectively.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I056d3114210db71c2840a24562b51caf2546e195

Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I688a76277b729672835d51fafb68d1d6205b6ae4

The SGI/RD platforms have been using PSCI state ID format as defined in
PSCI version prior to 1.0. This is being changed and the PSCI extended
state ID format as defined in PSCI version 1.1 is being adapted. In
addition to this, the use of Arm recommended PSCI state ID encoding is
enabled as well.

Change-Id: I2be8a9820987a96b23f4281563b6fa22db48fa5f
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>

Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).

HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.

HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.

HW CRC calculation support will be used in the upcoming
firmware update patches.

Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Disable non-invasive debug of secure state for Juno
in release builds. This makes sure that PMU counts
only Non-secure events.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0d1c3f96f3b4e48360a7211ae55851d65d291025

This patch adds support for the crypto and secure storage secure
partitions for the Total Compute platform.  These secure partitions
have to be managed by Hafnium executing at S-EL2

Change-Id: I2df690e3a99bf6bf50e2710994a905914a07026e
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>

AMU counters are used for monitoring the CPU performance. RD-V1-MC
platform has architected AMU available for each core. Enable the use of
AMU by non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).

Change-Id: I33be594cee669e7f4031e5e5a371eec7c7451030
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>

Added GPT parser support in BL2 for Arm platforms to get the entry
address and length of the FIP in the GPT image.

Also, increased BL2 maximum size for FVP platform to successfully
compile ROM-enabled build with this change.

Verified this change using a patch:
https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/9654



Change-Id: Ie8026db054966653b739a82d9ba106d283f534d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

NOTE: Breaking change to the way UUIDs are stored in the DT

Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.

Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.

To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.

Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: David Horstmann <david.horstmann@arm.com>

Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.

Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Add board support for RD-N2 Cfg1 variant of RD-N2 platform. It is a
variant of RD-N2 platform with a reduced interconnect mesh size (3x3)
and core count (8-cores). Its platform variant id is 1.

Change-Id: I34ad35c5a5c1e9b69a658fb92ed00e5bc5fe72f3
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

A Neoverse reference design platform can have two or more variants that
differ in core count, cluster count or other peripherals. To allow reuse
of platform code across all the variants of a platform, introduce build
option CSS_SGI_PLATFORM_VARIANT for Arm Neoverse reference design
platforms. The range of allowed values for the build option is platform
specific. The recommended range is an interval of non negative integers.

An example usage of the build option is
make PLAT=rdn2 CSS_SGI_PLATFORM_VARIANT=1

Change-Id: Iaae79c0b4d0dc700521bf6e9b4979339eafe0359
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

This will help in keeping source file generic and conditional
compilation can be contained in platform provided dt files.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I3c6e0a429073f0afb412b9ba521ce43f880b57fe

sgm775 is an old platform and is no longer maintained by Arm and its
fast model FVP_CSS_SGM-775 is no longer available for download.
This platform is now superseded by Total Compute(tc) platforms.

This platform is now deprecated but the source will be kept for cooling
off period of 2 release cycle before removing it completely.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I8fe1fc3da0c508dba62ed4fc60cbc1642e0f7f2a

ELP processors can sometimes have different MIDR values or features so
we are adding the "_arm" suffix to differentiate the reference
implementation from other future versions.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ieea444288587c7c18a397d279ee4b22b7ad79e20

By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.

Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2

To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been added that is included in the FIP and a Juno specific BL31
setup has been added to populate fconf with the hw_config.

Juno's BL2 setup has been updated to align it with the new behavior
implemented in the Arm FVP platform, where fw_config is passed in arg1
to BL31 instead of soc_fw_config. The BL31 setup is expected to use the
fw_config passed in arg1 to find the hw_config.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6

Remove an incorrect tabulation in front of an $(error) function call
outside of a recipe, which caused the following text to be displayed:

  plat/arm/board/common/board_common.mk:36: *** recipe commences before first target.  Stop.

instead of:

  plat/arm/board/common/board_common.mk:36: *** "Unsupported ARM_ROTPK_LOCATION value".  Stop.

Change-Id: I8592948e7de8ab0c4abbc56eb65a53eb1875a83c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

The number of ITS have changed from 4 to 1, resulting
in GICR base address change.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I28101f0d1faf9f3c58591b642033c3fd49a275e7

NT_FW_CONFIG file is meant to be passed from BL31 to be consumed by
BL33, fvp platforms use this to pass measured boot configuration and
the x0 register is used to pass the base address of it.

In case of hafnium used as hypervisor in normal world, hypervisor
manifest is expected to be passed from BL31 and its base address is
passed in x0 register.

As only one of NT_FW_CONFIG or hypervisor manifest base address can be
passed in x0 register and also measured boot is not required for SPM so
disable passing NT_FW_CONFIG.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ifad9d3658f55ba7d70f468a88997d5272339e53e

Refine the function plat_add_sp_images_load_info() by saving the
previous node and only setting its next link when the current node is
valid. This can reduce the check for the next node and simply the
total logic.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I4061428bf49ef0c3816ac22aaeb2e50315531f88

The traverse flow in function plat_add_sp_images_load_info() will find
the last node in the main load info list, with its
next_load_info==NULL. However this node is still useful and should not
be overridden with SP node info.

The bug will cause below error on RDN2 for spmd enabled:

ERROR:   Invalid NT_FW_CONFIG DTB passed

Fix the bug by only setting the next_load_info of the last node in the
original main node list.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Icaee5da1f2d53b29fdd6085a8cc507446186fd57

Add basic support for Cortex_A78C CPU.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Id9e41cbe0580a68c6412d194a5ee67940e8dae56

Add the secure partition mmap table and the secure partition boot
information to support secure partitions on RD-N2 platform. In addition
to this, add the required memory region mapping for accessing the
SoC peripherals from the secure partition.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: I2c75760d6c8c3da3ff4885599be420e924aeaf3c

A TZC400 controller is placed inline on DRAM channels and regulates
the secure and non-secure accesses to both secure and non-secure
regions of the DRAM memory. Configure each of the TZC controllers
across the Chips.

For use by secure software, configure the first chip's trustzone
controller to protect the upper 16MB of the memory of the first DRAM
block for secure accesses only. The other regions are configured for
non-secure read write access. For all the remote chips, all the DRAM
regions are allowed for non-secure read and write access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I809f27eccadfc23ea0ef64e2fd87f95eb8f195c1

On a multi-chip platform, the boot CPU on the first chip programs the
TZC controllers on all the remote chips. Define a memory region map for
the TZC controllers for all the remote chips and include it in the BL2
memory map table.

In addition to this, for SPM_MM enabled multi-chip platforms, increase
the number of mmap entries and xlat table counts for EL3 execution
context as well because the shared RAM regions and GIC address space of
remote chips are accessed.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I6f0b5fd22f9f28046451e382eef7f1f9258d88f7

For multi-chip platforms, add a macro to define the memory regions on
chip numbers >1 and its associated access permissions. These memory
regions are marked with non-secure access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: If3d6180fd8ea61f45147c39d3140d694abf06617

Allow the access of system registers and nor2 flash memory region
from s-el0. This allows the secure parititions residing at s-el0
to access these memory regions.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I3887a86770de806323fbde0d20fdc96eec6e0c3c

Define a default DMC-620 TZC memory region configuration and use it to
specify the TZC memory regions on sgi575, rdn1edge and rde1edge
platforms. The default DMC-620 TZC memory regions are defined
considering the support for secure paritition as well.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Iedee3e57d0d3de5b65321444da51ec990d3702db

Remove the 'ARM_' prefix from the macros defining the CPER buffer memory
and replace it with 'CSS_SGI_' prefix. These macros are applicable only
for platforms supported within plat/sgi. In addition to this, ensure
that these macros are defined only if the RAS_EXTENSION build option is
enabled.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I44df42cded18d9d3a4cb13e5c990e9ab3194daee

The macros defining the SMC function ids for DMC-620 error handling are
listed in the sgi_base_platform_def.h header file. But these macros are
not applicable for all platforms supported under plat/sgi. So move these
macro definitions to sgi_ras.c file in which these are consumed. While
at it, remove the AArch32 and error injection function ids as these are
unused.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I249b54bf4c1b1694188a1e3b297345b942f16bc9

The macros specific to SDEI defined in the sgi_base_platform_def.h are
not applicable for all the platforms supported by plat/sgi. So refactor
the SDEI specific macros into a new header file and include this file on
only on platforms it is applicable on.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cb7125334f02a21cae1837cdfd765c16ab50bf5

Add basic support for Makalu ELP processor core.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7b1ddbb8dd43326ecb8ff188f6f8fcf239826a93

The FF-A v1.0 spec allows two configurations for the number of EC/vCPU
instantiated in a Secure Partition:
-A MultiProcessor (MP) SP instantiates as many ECs as the number of PEs.
An EC is pinned to a corresponding physical CPU.
-An UniProcessor (UP) SP instantiates a single EC. The EC is migrated to
the physical CPU from which the FF-A call is originating.
This change permits exercising the latter case within the TF-A-tests
framework.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7fae0e7b873f349b34e57de5cea496210123aea0

Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: Ie199c60553477c43d1665548ae78cdfd1aa7ffcf

Add basic support for Makalu CPU.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I4e85d425eedea499adf585eb8ab548931185043d