GitLab

The conditional

  if (desc != NULL)
          ...

is always true here because we assert it 6 lines above:

  assert(desc != NULL);

Remove the if-conditional and concatenate the printf() calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This line should check the existence of the input file, but it is
actually checking the output file.  When -o option is given to the
"update" command, the outfile is unlikely to exist, then parse_fip()
is skipped and an empty FIP file is output.  This is wrong behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Patches for 8173 crbook 

Import constant-time bcmp() and use it where necessary

To avoid timing side-channel attacks, it is needed to use a constant
time memory comparison function when comparing hashes. The affected
code only cheks for equality so it isn't needed to use any variant of
memcmp(), bcmp() is enough.

Also, timingsafe_bcmp() is as fast as memcmp() when the two compared
regions are equal, so this change incurrs no performance hit in said
case. In case they are unequal, the boot sequence wouldn't continue as
normal, so performance is not an issue.

Change-Id: I1c7c70ddfa4438e6031c8814411fef79fd3bb4df
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Some side-channel attacks involve an attacker inferring something from
the time taken for a memory compare operation to complete, for example
when comparing hashes during image authentication. To mitigate this,
timingsafe_bcmp() must be used for such operations instead of the
standard memcmp().

This function executes in constant time and so doesn't leak any timing
information to the caller.

Change-Id: I470a723dc3626a0ee6d5e3f7fd48d0a57b8aa5fd
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Add strnlen() to local C library

This code has been imported and slightly adapted from FreeBSD:
https://github.com/freebsd/freebsd/blob/6253393ad8df55730481bf2aafd76bdd6182e2f5/lib/libc/string/strnlen.c



Change-Id: Ie5ef5f92e6e904adb88f8628077fdf1d27470eb3
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Now it's possbile to build BL31 for MT8173 with ERROR_DEPRECATED=1.
Signed-off-by: Koan-Sin Tan <koansin.tan@gmail.com>

Signed-off-by: Koan-Sin Tan <koansin.tan@gmail.com>

Signed-off-by: Koan-Sin Tan <koansin.tan@gmail.com>

make 'make ARCH=aarch64 CROSS_COMPILE=aarch64-linux-gnu- PLAT=mt8173
ENABLE_PLAT_COMPAT=0' work.

Change-Id: I13f35d8aef23dfa0e65883fa0be43f1513c9fef5
Signed-off-by: Koan-Sin Tan <koansin.tan@gmail.com>

Correct preprocessor conditionals

drivers: add designware emmc driver

One nasty part of ATF is some of boolean macros are always defined
as 1 or 0, and the rest of them are only defined under certain
conditions.

For the former group, "#if FOO" or "#if !FOO" must be used because
"#ifdef FOO" is always true.  (Options passed by $(call add_define,)
are the cases.)

For the latter, "#ifdef FOO" or "#ifndef FOO" should be used because
checking the value of an undefined macro is strange.

For AARCH32/AARCH64, these macros are defined in the top-level
Makefile as follows:

ifeq (${ARCH},aarch32)
        $(eval $(call add_define,AARCH32))
else
        $(eval $(call add_define,AARCH64))
endif

This means only one of the two is defined.  So, AARCH32/AARCH64
belongs to the latter group where we should use #ifdef or #ifndef.
The conditionals are mostly coded correctly, but I see some mistakes.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

One nasty part of ATF is some of boolean macros are always defined
as 1 or 0, and the rest of them are only defined under certain
conditions.

For the former group, "#if FOO" or "#if !FOO" must be used because
"#ifdef FOO" is always true.  (Options passed by $(call add_define,)
are the cases.)

For the latter, "#ifdef FOO" or "#ifndef FOO" should be used because
checking the value of an undefined macro is strange.

Here, IMAGE_BL* is handled by make_helpers/build_macro.mk like
follows:

  $(eval IMAGE := IMAGE_BL$(call uppercase,$(3)))

  $(OBJ): $(2)
          @echo "  CC      $$<"
          $$(Q)$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -D$(IMAGE) -c $$< -o $$@

This means, IMAGE_BL* is defined when building the corresponding
image, but *undefined* for the other images.

So, IMAGE_BL* belongs to the latter group where we should use #ifdef
or #ifndef.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Fix parallel building

Support Designware eMMC driver. It's based on both IO block
and eMMC driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Fix fiptool bug introduced by recent rework

Update libfdt to version 1.4.2

Clear static variables in X509 parser on error

Append . then strip /. seems clumsy.  Just use $(patsubst %/,%, ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Soren reports build fails if -j option is given:

  $ make -j16 CROSS_COMPILE=aarch64-linux-gnu-
  Building fvp
  make: *** No rule to make target 'build/fvp/release/bl1/',
                    needed by 'build/fvp/release/bl1/bl1.ld'.  Stop.
  make: *** Waiting for unfinished jobs....

The cause of the failure is that $(dir ) leaves a trailing / on the
directory names.   It must be ripped off to let Make create the
directory.

There are some ways to fix the issue.  Here, I chose to make MAKE_LD
look like MAKE_C and MAKE_S because bl*_dirs seems the central place
of making directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

In mbedtls_x509_parser.c there are some static arrays that are filled
during the integrity check and then read whenever an authentication
parameter is requested. However, they aren't cleared in case of an
integrity check failure, which can be problematic from a security
point of view. This patch clears these arrays in the case of failure.

Change-Id: I9d48f5bc71fa13e5a75d6c45b5e34796ef13aaa2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix the parameter type of the maintenance functions of data cache.

Add missing declarations for AArch32 versions of dcsw_op_louis and
dcsw_op_all to match the AAch64 ones.

Change-Id: I4226e8ea4f8b2b5bc2972992c83de659ee0da52c

Macro cleanups

Correct system include order

mt8173: Correct SPM MCDI firmware length

add utility macros to utils.h

I do not see any line that references BL32_SIZE.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We have lots of duplicated defines (and comment blocks too).
Move them to include/plat/common/common_def.h.

While we are here, suffix the end address with _END instead of
_LIMIT.  The _END is a better fit to indicate the linker-derived
real end address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The usage of _LIMIT seems odd here, so rename as follows:
  BL_CODE_LIMIT     --> BL_CODE_END
  BL_RO_DATA_LIMIT  --> BL_RO_DATA_END
  BL1_CODE_LIMIT    --> BL1_CODE_END
  BL1_RO_DATA_LIMIT --> BL1_RO_DATA_END

Basically, we want to use _LIMIT and _END properly as follows:
  *_SIZE + *_MAX_SIZE = *_LIMIT
  *_SIZE + *_SIZE     = *_END

The _LIMIT is generally defined by platform_def.h to indicate the
platform-dependent memory constraint.  So, its typical usage is
  ASSERT(. <= BL31_LIMIT, "BL31 image has exceeded its limit.")
in a linker script.

On the other hand, _END is used to indicate the end address of the
compiled image, i.e. we do not know it until the image is linked.

Here, all of these macros belong to the latter, so should be
suffixed with _END.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

NOTE - this is patch does not address all occurrences of system
includes not being in alphabetical order, just this one case.

Change-Id: I3cd23702d69b1f60a4a9dd7fd4ae27418f15b7a3

Delete old version of libfdt at lib/libfdt. Move new libfdt API
headers to include/lib/libfdt and all other files to lib/libfdt.

Change-Id: I32b7888f1f20d62205310e363accbef169ad7b1b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

* Add libfdt.mk helper makefile
* Remove unused libfdt files
* Minor changes to fdt.h and libfdt.h to make them C99 compliant

Adapted from 754d78b1

.

Change-Id: I0847f1c2e6e11f0c899b0b7ecc522c0ad7de210c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Import libfdt code from https://git.kernel.org/cgit/utils/dtc/dtc.git


tag "v1.4.2" commit ec02b34c05be04f249ffaaca4b666f5246877dea.

This version includes commit d0b3ab0a0f46ac929b4713da46f7fdcd893dd3bd,
which fixes a buffer overflow in fdt_offset_ptr().

Change-Id: I05a30511ea68417ee7ff26477da3f99e0bd4e06b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

When generating the list of files to check by checkpatch.pl, the list
generated by `git ls-files` is filtered by a regular expression with
grep. Due to a malformed regex, the dot of `.md` was considered a
wildcard instead of a dot. This patch fixes this so that it matches
only dots, thus allowing the two following files to be checked:

* tools/cert_create/include/cmd_opt.h
* tools/cert_create/src/cmd_opt.c

Also extended the list of library directories to check by checkpatch
to exclude any folder starting with libfdt.

Change-Id: Ie7bf18efe4df29e364e5d67ba1118515304ed9a4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The "make fip" shows the content of the generated FIP at the end of
the build.  (This is shown by "fiptool info" command.)

Prior to commit e0f083a0 ("fiptool: Prepare ground for expanding
the set of images at runtime"), the last part of the build log of
 make CROSS_COMPILE=aarch64-linux-gnu- BL33=../u-boot/u-boot.bin fip
was like follows:

 Trusted Boot Firmware BL2: offset=0xB0, size=0x4188, cmdline="--tb-fw"
 EL3 Runtime Firmware BL31: offset=0x4238, size=0x6090, cmdline="--soc-fw"
 Non-Trusted Firmware BL33: offset=0xA2C8, size=0x58B51, cmdline="--nt-fw"

With that commit, now it is displayed like follows:

 Non-Trusted Firmware BL33: offset=0xB0, size=0x58B51, cmdline="--nt-fw"
 EL3 Runtime Firmware BL31: offset=0x58C01, size=0x6090, cmdline="--soc-fw"
 Trusted Boot Firmware BL2: offset=0x5EC91, size=0x4188, cmdline="--tb-fw"

You will notice two differences:
  - the contents are displayed in BL33, BL31, BL2 order
  - the offset values are wrong

The latter is more serious, and means "fiptool info" is broken.

Another interesting change is "fiptool update" every time reverses
the image order.  For example, if you input FIP with BL2, BL31, BL33
in this order, the command will pack BL33, BL31, BL2 into FIP, in
this order.  Of course, the order of components is not a big deal
except that users will have poor impression about this.

The root cause is in the implementation of add_image(); the
image_head points to the last added image.  For example, if you call
add_image() for BL2, BL31, BL33 in this order, the resulted image
chain is:

  image_head -> BL33 -> BL31 -> BL2

Then, they are processed from the image_head in "for" loops:

  for (image = image_head; image != NULL; image = image->next) {

This means images are handled in Last-In First-Out manner.

Interestingly, "fiptool create" is still correct because
add_image_desc() also reverses the descriptor order and the command
works as before due to the double reverse.

The implementation of add_image() is efficient, but it made the
situation too complicated.

Let's make image_head point to the first added image.  This will
add_image() inefficient because every call of add_image() follows
the ->next chain to get the tail.  We can solve it by adopting a
nicer linked list structure, but I am not doing as far as that
because we handle only limited number of images anyway.

Do likewise for add_image_desc().

Fixes: e0f083a0

 ("fiptool: Prepare ground for expanding the set of images at runtime")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The actual length of the firmware is 1001 32 bit words.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

We often want to zero out allocated memory.

My main motivation for this commit is to set image::next and
image_desc::next to NULL automatically in the next commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>