GitLab

In iMX8MM it is possible to have two copies of bootloader in
SD/eMMC and switch between them. The switch is triggered either
by the BootROM in case the bootloader image is faulty OR can be
enforced by the user. To trigger that switch the
PERSIST_SECONDARY_BOOT bit should be set in GPR10 SRC register.
As the bit is retained after WARM reset, that permits to control
BootROM behavior regarding what boot image it will boot after
reset: primary or secondary.

This is useful for reliable bootloader A/B updates, as it permits
switching between two copies of bootloader at different offsets of
the same storage.

If the PERSIST_SECONDARY_BOOT is 0, the boot ROM uses address
0x8400 for the primary image. If the PERSIST_SECONDARY_BOOT is 1,
the boot ROM reads that secondary image table from address 0x8200
on the boot media and uses the address specified in the table for
the secondary image.

Secondary Image Table contains the sector of secondary bootloader
image, exluding the offset to that image (explained below in the
note). To generate the Secondary Image Table, use e.g.:
$ printf '\x0\x0\x0\x0\x0\x0\x0\x0\x33\x22\x11'
         '\x00\x00\x10\x0\x0\x00\x0\x0\x0'
  > /tmp/sit.bin
$ hexdump  -vC /tmp/sit.bin
  00000000  00 00 00 00
  00000004  00 00 00 00
  00000008  33 22 11 00 <--- This is the "tag"
  0000000c  00 10 00 00 <--- This is the "firstSectorNumber"
  00000010  00 00 00 00

You can also use NXP script from [1][2] imx-mkimage tool for
SIT generation. Note that the firstSectorNumber is NOT the offset
of the IVT, but an offset of the IVT decremented by Image Vector
Table offset (Table 6-25. Image Vector Table Offset and Initial
Load Region Size for iMX8MM/MQ), so for secondary SPL copy at
offset 0x1042 sectors, firstSectorNumber must be 0x1000
(0x42 sectors * 512 = 0x8400 bytes offset).

In order to test redundant boot board should be closed and
SD/MMC manufacture mode disabled, as secondary boot is not
supported in the SD/MMC manufacture mode, which can be disabled
by blowing DISABLE_SDMMC_MFG (example for iMX8MM):
> fuse prog -y 2 1 0x00800000

For additional details check i.MX 8M Mini Apllication Processor
Reference Manual, 6.1.5.4.5 Redundant boot support for
expansion device chapter.

[1] https://source.codeaurora.org/external/imx/imx-mkimage/


[2] scripts/gen_sit.sh
Change-Id: I0a5cea7295a4197f6c89183d74b4011cada52d4c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>

The number of gpc imr mask reg & the offset is different
on some SOC, so correct it & replace the magic number with
macro define.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ic701675cdd92e043dcd7f06722f2e871068aec74

Although the GPC provides the similar functions for all the
i.MX8M SoC family, the HW register offset and bit defines
still have some slight difference, so move the hw reg
offset & most of the bitfield defines in 'gpc_reg.h' that
is specific to each SoC.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I291c435fe98c2f6e6ff8fe0c715ff3a83daa6a0f

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I8b19e833a4e1067e1cfcc9bfaede7854e0e63004

Add the basic support for opteed SPD on imx8mq & imx8mm.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I6c4855c89dea78d13d172c3d86cf047f829e51ce

CAAM module must be initialized in secure world
before it can be used in non-secure world.

Change-Id: I042893667ddef99d8b6fc3902847d516d8591996
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

Platform defines are already provided by the build system so let's not
duplicate them.

Change-Id: Icf1ea76c3c3213e27b447c95e2b22b961fa7693e
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

The manual documents that 0x3036006c should contains the soc revision
for imx8mq but this always reports A0. Work around this by parsing the
ROM header and checking if OCOTP register 0x40 is stuck at 0xff0055aa.

Determining this inside TF-A makes life easier for OS, see for example
this linux discussion: https://lkml.org/lkml/2019/5/3/465



The soc revision can also be useful inside TF-A itself, for example for
the non-upstream DDR DVFS "busfreq" feature is affected by 8mq erratas.

The clock for OCOTP block can be disabled by OS so only initialize soc
revision once at boot time.

Change-Id: I9ca3f27840229ce8a28b53870e44da29f63c73aa
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

for the i.MX8M SOCs, part of the code for gpc
and PSCI implementation can be reused and make it
common for all these SoCs. this patch extracts
the common part for reuse.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

For i.MX8MQ B0 revision the default configuration of JRaMID is not valid
to allow the kernel to use the CAAM job rings. This patch sets the
master ID of the Cortex A in the JRaMID registers.
Signed-off-by: Chris Spencer <christopher.spencer@sea.co.uk>

i.MX8MQ is new SOC of NXP's i.MX8M family based on
A53. It can provide industry-leading audio, voice
and video processing for applications that scale
from consumer home audio to industrial building
automation and mobile computers

this patchset add the basic supoort to boot up
the 4 X A53. more feature will be added later.
Signed-off-by: Bai Ping <ping.bai@nxp.com>