- 22 Apr, 2021 1 commit
-
-
Manish Pandey authored
* changes: plat: imx8mm: Add in BL2 with FIP plat: imx8mm: Enable Trusted Boot
-
- 21 Apr, 2021 10 commits
-
-
Mark Dykes authored
-
bipin.ravi authored
-
Manish Pandey authored
* changes: renesas: rzg: Add support to identify EK874 RZ/G2E board drivers: renesas: common: watchdog: Add support for RZ/G2E drivers: renesas: rzg: Add QoS support for RZ/G2E drivers: renesas: rzg: Add PFC support for RZ/G2E drivers: renesas: common: Add support for DRAM initialization on RZ/G2E SoC renesas: rzg: Add support to identify HopeRun HiHope RZ/G2N board drivers: renesas: common: emmc: Select eMMC channel for RZ/G2N SoC drivers: renesas: rzg: Add QoS support for RZ/G2N drivers: renesas: rzg: Add PFC support for RZ/G2N drivers: renesas: common: Add support for DRAM initialization on RZ/G2N SoC renesas: rzg: Add support to identify HopeRun HiHope RZ/G2H board drivers: renesas: common: emmc: Select eMMC channel for RZ/G2H SoC drivers: renesas: rzg: Add QoS support for RZ/G2H drivers: renesas: rzg: Add PFC support for RZ/G2H drivers: renesas: common: Add support for DRAM initialization on RZ/G2H SoC drivers: renesas: rzg: Switch using common ddr code drivers: renesas: ddr: Move to common
-
Manish Pandey authored
-
Manish Pandey authored
* changes: plat: xilinx: versal: Add the IPI CRC checksum macro support plat: xilinx: common: Rename the IPI CRC checksum macro
-
Joanna Farley authored
* changes: build(hooks): add commitlint hook build(hooks): add Commitizen hook build(hooks): add Gerrit hook build(hooks): add Husky configuration
-
Rajan Vaja authored
Counter frequency for generic timer of Arm-A53 based Application Processing Unit(APU) is not configuring in case if First Stage Boot Loader(FSBL) does not initialize counter frequency. This happens when FSBL is running from Arm-R5 based Real-time Processing Unit(RPU). Because of that generic timer driver functionality is not working. So configure counter frequency during initialization. Signed-off-by:Rajan Vaja <rajan.vaja@xilinx.com> Change-Id: Icfccd59d7d2340fba25ebfb2ef6a813af4290896
-
Venkatesh Yadav Abbarapu authored
Add support for CRC checksum for IPI data when the macro IPI_CRC_CHECK is enabled. Signed-off-by:Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Change-Id: I3c25c715885759076055c6505471339b5d6edcd5
-
Venkatesh Yadav Abbarapu authored
Rename the macro ZYNQMP_IPI_CRC_CHECK to IPI_CRC_CHECK and move the related defines to the common include. Signed-off-by: -
Olivier Deprez authored
* changes: spmd: add FFA_INTERRUPT forwarding doc: spm: update messaging method field
-
- 20 Apr, 2021 29 commits
-
-
johpow01 authored
ELP processors can sometimes have different MIDR values or features so we are adding the "_arm" suffix to differentiate the reference implementation from other future versions. Signed-off-by:John Powell <john.powell@arm.com> Change-Id: Ieea444288587c7c18a397d279ee4b22b7ad79e20
-
Manish Pandey authored
* changes: Add SiP service to configure Arm Ethos-N NPU plat/arm/juno: Add support to use hw_config in BL31
-
Olivier Deprez authored
In the case of a SP pre-empted by a non-secure interrupt, the SPMC returns to the SPMD through the FFA_INTERRUPT ABI. It is then forwarded to the normal world driver hinting the SP has to be resumed after the non-secure interrupt has been serviced. Signed-off-by:Olivier Deprez <olivier.deprez@arm.com> Change-Id: I51a694dddcb8ea30fa84e1f11d018bc2abec0a56
-
Manish Pandey authored
As per FF-A v1.0 spec, Table 3.1, messaging method field also contains information about whether partition supports managed exit or not. Since a partition can support managed exit only if it supports direct messaging, so there are two new possible values, managed exit with only direct messaging or with both messaging methods. Signed-off-by:Manish Pandey <manish.pandey2@arm.com> Change-Id: Ic77cfb37d70975c3a36c56f8b7348d385735f378
-
Lad Prabhakar authored
Add support to identify Silicon Linux RZ/G2E evaluation kit (EK874). Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Change-Id: Id7bdbc9b0d25aa9af496d58d4bd5055579edc104
-
Lad Prabhakar authored
Add watchdog support for RZ/G2E SoC. Signed-off-by:
-
Lad Prabhakar authored
Add QoS support for RZ/G2E SoC. Signed-off-by:
-
Lad Prabhakar authored
Add pin control support for RZ/G2E SoC. Signed-off-by:
-
Lad Prabhakar authored
DRAM initialization on RZ/G2E SoC is identical to R-Car E3 so re-use the same. Signed-off-by:
-
Lad Prabhakar authored
Add support to identify HopeRun HiHope RZ/G2N board. Signed-off-by:
-
Lad Prabhakar authored
Select MMC_CH1 for eMMC on RZ/G2N SoC. Signed-off-by:
-
Lad Prabhakar authored
Add QoS support for RZ/G2N SoC. Signed-off-by:
-
Lad Prabhakar authored
Add pin control support for RZ/G2N SoC. Signed-off-by:
-
Lad Prabhakar authored
Add support for initializing DRAM on RZ/G2N SoC. Signed-off-by:
-
Lad Prabhakar authored
Add support to identify HopeRun HiHope RZ/G2H board. Signed-off-by:
-
Lad Prabhakar authored
Select MMC_CH1 for eMMC on RZ/G2H SoC. Signed-off-by:
-
Lad Prabhakar authored
Add QoS support for RZ/G2H SoC. Signed-off-by:
-
Lad Prabhakar authored
Add pin control support for RZ/G2H SoC. Signed-off-by:
-
Lad Prabhakar authored
Add support for initializing DRAM on RZ/G2H SoC. Signed-off-by:
-
Lad Prabhakar authored
Switch using common ddr driver code from renesas/common/ddr directory for RZ/G2M SoC. Signed-off-by:
-
Lad Prabhakar authored
Move ddr driver code to common directory, so that the same code can be re-used by both R-Car Gen3 and RZ/G2 platforms. Signed-off-by:
-
Madhukar Pappireddy authored
-
Mikael Olsson authored
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode the non-secure world cannot access the registers needed to use the NPU. To still allow the non-secure world to use the NPU, a SiP service has been added that can delegate non-secure access to the registers needed to use it. Only the HW_CONFIG for the Arm Juno platform has been updated to include the device tree for the NPU and the platform currently only loads the HW_CONFIG in AArch64 builds. Signed-off-by:Mikael Olsson <mikael.olsson@arm.com> Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
-
Mikael Olsson authored
To make it possible to use the hw_config device tree for dynamic configuration in BL31 on the Arm Juno platform. A placeholder hw_config has been added that is included in the FIP and a Juno specific BL31 setup has been added to populate fconf with the hw_config. Juno's BL2 setup has been updated to align it with the new behavior implemented in the Arm FVP platform, where fw_config is passed in arg1 to BL31 instead of soc_fw_config. The BL31 setup is expected to use the fw_config passed in arg1 to find the hw_config. Signed-off-by: -
Manish Pandey authored
-
Manish Pandey authored
* changes: plat/marvell: remove subversion from Marvell make files drivers/marvell: check if TRNG unit is present plat/marvell: a8k: move efuse definitions to separate header plat/marvell/armada: fix TRNG return SMC handling drivers: marvell: comphy: add rx training on 10G port plat/marvell/armada: postpone MSS CPU startup to BL31 stage plat: marvell: armada: a8k: Fix LD selector mask plat/marvell/armada: allow builds without MSS support drivers: marvell: misc-dfx: extend dfx whitelist drivers: marvell: add support for secure read/write of dfx register-set ddr_phy: use smc calls to access ddr phy registers drivers: marvell: thermal: use dedicated function for thermal SiPs drivers: marvell: add thermal sensor driver and expose it via SIP service fix: plat: marvell: fix MSS loader for A8K family
-
Konstantin Porotchkin authored
Subversion is not reflecting the Marvell sources variant anymore. This patch removes version.mk from Marvell plafroms. Signed-off-by:Konstantin Porotchkin <kostap@marvell.com> Change-Id: I8f3afbe3fab3a38da68876f77455f449f5fe0179
-
Konstantin Porotchkin authored
Some Marvell SoCs may have crypto engine disabled in the HW. This patch checks the AP LD0 efuse for crypto engine/TRNG presence before initializing the driver. Change-Id: I441e7c69a137106bd36302b028b04c0b31896dbd Signed-off-by:
sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com> Reviewed-by:
Yi Guo <yi.guo@cavium.com>
-
Konstantin Porotchkin authored
Move efuse definitions to a separate header file for later usage with other FW modules. Change-Id: I2e9465f760d0388c8e5863bc64a4cdc57de2417f Signed-off-by:
-
