Skip to content

GitLab

Switch branch/tag
  1. 02 Oct, 2018 1 commit
    • Antonio Nino Diaz's avatar
      plat/arm: Remove option ARM_BOARD_OPTIMISE_MEM · c0740e4f
      Antonio Nino Diaz authored 
      

This option makes it hard to optimize the memory definitions of all Arm
platforms because any change in the common defines must work in all of
them. The best thing to do is to remove it and move the definition to
each platform's header.

FVP, SGI and SGM were using the definitions in board_arm_def.h. The
definitions have been copied to each platform's platform_def.h. Juno
was already using the ones in platform_def.h, so there have been no
changes.

Change-Id: I9aecd11bbc72a3d0d7aad1ef9934d8df21dcfaf2
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      c0740e4f
  3. 28 Sep, 2018 28 commits
  5. 27 Sep, 2018 1 commit
    • Shawn Guo's avatar
      poplar: fix build error with POPLAR_RECOVERY=1 · d5ed2946
      Shawn Guo authored 
      Commit eba1b6b3

 ("plat/poplar: migrate to mmc framework") defines
variable 'info' without !POPLAR_RECOVERY protection, and hence causes
the following unused variable error with POPLAR_RECOVERY=1 build.

plat/hisilicon/poplar/bl1_plat_setup.c: In function ‘bl1_platform_setup’:
plat/hisilicon/poplar/bl1_plat_setup.c:95:25: error: unused variable ‘info’ [-Werror=unused-variable]
  struct mmc_device_info info;
                         ^~~~

The patches fixes the build error with POPLAR_RECOVERY=1.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
      d5ed2946
  7. 26 Sep, 2018 2 commits
    • Haojian Zhuang's avatar
      hikey960: fix build issue for clang · 492a504c
      Haojian Zhuang authored 
      

plat/hisilicon/hikey960/include/plat_macros.S:19:55: error: unexpected token in
'.asciz' directive
 .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" " Offset:\t\t\tvalue\n"
                                                      ^
Makefile:720: recipe for target 'build/hikey960/debug/bl1/cortex_a53.o' failed
make: *** [build/hikey960/debug/bl1/cortex_a53.o] Error 1

Merge the two lines into one.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@linaro.org>
      492a504c
    • Haojian Zhuang's avatar
      hikey: fix build issue for clang · 00a64624
      Haojian Zhuang authored 
      

plat/hisilicon/hikey/include/plat_macros.S:19:55: error: unexpected token in '.asciz' directive
 .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" " Offset:\t\t\tvalue\n"
                                                      ^
Makefile:720: recipe for target 'build/hikey/debug/bl1/cortex_a53.o' failed
make: *** [build/hikey/debug/bl1/cortex_a53.o] Error 1

Merge two lines into one line.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@linaro.org>
      00a64624
  9. 24 Sep, 2018 1 commit
  11. 19 Sep, 2018 1 commit
    • Andre Przywara's avatar
      drivers: i2c: mentor: move platform code into header files · dfc0fb27
      Andre Przywara authored 
      

At the moment we have two I2C stub drivers (for the Allwinner and the
Marvell platform), which #include the actual .c driver file.
Change this into the more usual design, by renaming and moving the stub
drivers into platform specific header files and including these from the
actual driver file. The platform specific include directories make sure
the driver picks up the right header automatically.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      dfc0fb27
  13. 18 Sep, 2018 1 commit
  15. 17 Sep, 2018 2 commits
    • Andre Przywara's avatar
      allwinner: sun50i_h6: initialise I2C just before powering down · 159c5249
      Andre Przywara authored 
      

Even though we initialise the platform part and the I2C controller
itself at boot time, we actually only access the bus on power down.
Meanwhile a rich OS might have configured the I2C pins differently or
even disabled the controller.
So repeat the platform setup and controller initialisation just before
we actually access the bus to power off the system. This is safe,
because at this point the rich OS should no longer be running.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      159c5249
    • Andre Przywara's avatar
      allwinner: sun50i_h6: improve I2C setup · 1a910bce
      Andre Przywara authored 
      

Drop the unnecessary check for the I2C pins being already configured as
I2C pins (we actually don't care).
Also avoid resetting *every* peripheral that is covered by the PRCM reset
controller, instead just clear the one line connected to the I2C controller.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      1a910bce
  17. 10 Sep, 2018 1 commit
  19. 09 Sep, 2018 1 commit
  21. 07 Sep, 2018 1 commit