GitLab

The memory layout for the FPGA is fairly uniform for most of the FPGA
images, and we already assume that DRAM starts at 2GB by default.

Prepopulate PRELOADED_BL33_BASE and FPGA_PRELOADED_DTB_BASE to some
sane default values, to simplify building some stock image.
If people want to deviate from that, they can always override those
addresses on the make command line.

Change-Id: I2238fafb3f8253a01ad2d88d45827c141d9b29dd
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

To support FPGAs with those cores as well, as the respective cpulib
files to the Makefile.

Change-Id: I1a60867d5937be88b32b210c7817be4274554a76
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The maximum number of clusters is currently set to 2, which is quite
limiting. As there are FPGA images with 4 clusters, let's increase the
limit to 4.

Change-Id: I9a85ca07ebbd2a018ad9668536d867ad6b75e537
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

This patch adds the IIDR value for GIC600-AE to the gicv3_is_gic600()
helper function. This helps platforms supporting this version of the
GIC600 interrupt controller to function with the generic GIC driver.

Verified with tftf-validation test suite

******************************* Summary *******************************
> Test suite 'Framework Validation'
                                                                Passed
> Test suite 'Timer framework Validation'
                                                                Passed
=================================
Tests Skipped : 0
Tests Passed  : 6
Tests Failed  : 0
Tests Crashed : 0
Total tests   : 6
=================================
NOTICE:  Exiting tests.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I518ae7b56f7f372e374e453287d76ca370fc3574

This patch performs the following:

- Creating two corstone700 platforms under corstone700 board:

  fvp and fpga

- Since the FVP and FPGA have IP differences, this commit provides a specific DTS for each platform
- The platform can be specified using the TARGET_PLATFORM Makefile variable
(possible values are: fvp or fpga)
- Allowing to use u-boot by:
  - Enabling NEED_BL33 option
  - Fixing non-secure image base: For no preloaded bl33 we want to
    have the NS base set on shared ram. Setup a memory map region
    for NS in shared map and set the bl33 address in the area.
- Setting the SYS_COUNTER_FREQ_IN_TICKS based on the selected
platform
- Setting ARM_MAP_SHARED_RAM and ARM_MAP_NS_SHARED_RAM to use MT_MEMORY

Change-Id: I4c8ac3387acb1693ab617bcccab00d80e340c163
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>

* changes:
  stm32mp1: shared resources: apply registered configuration
  stm32mp1: shared resources: count GPIOZ bank pins
  stm32mp1: shared resources: define resource identifiers

Fix all external broken links reported by Sphinx linkcheck tool.

This does not take care of broken cross-references between internal
TF-A documentation files. These will be fixed in a future patch.

Change-Id: I2a740a3ec0b688c14aad575a6c2ac71e72ce051e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

There were some links in the file "ras.rst" which were broken, this
patch fixes all the broken links in this file.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I00cf080e9338af5786239a4843cb4c2e0cc9d99d

The TF-A firmware build system is capable of building on both Unix like
and Windows host PCs. The commit ID 7ff088 "Enable MTE support" updated
the Makefile to conditionally enable the MTE support if the AArch64
architecture revision was greater than 8.5. However, the Makefile changes
were dependent on shell commands that are only available on unix shells,
resulting in build failures on a Windows host PC.

This patch fixes the Makefile by using a more portable approach for
comparing the architecture revision.

Change-Id: Icb56cbecd8af5b0b9056d105970ff4a6edd1755a
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

Added assert in the code to check valid address of dtb information
structure retrieved from fw_config device tree.
This patch fixes coverity defect:360213.

Also, removed conditional calling of "fconf_populate" as "fconf_populate"
function already checks the validity of the device tree address received
and go to panic in case of address is NULL.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib83e4e84a95e2456a12c7a2bb3fe70461d882cba

The non-secure world has no business accessing the CPU power switches in
the PRCM; those are handled by TF-A or the SCP. Only allow access to the
clock control part of the PRCM.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I657b97f4ea8a0073448ad3343fbc66ba168ed89e

The .rela.dyn section is the same for BL2-AT-EL3, BL31, TSP.

Move it to the common header file.

I slightly changed the definition so that we can do "RELA_SECTION >RAM".
It still produced equivalent elf images.

Please note I got rid of '.' from the VMA field. Otherwise, if the end
of previous .data section is not 8-byte aligned, it fails to link.

aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
make: *** [Makefile:1071: build/qemu/release/bl31/bl31.elf] Error 1

Change-Id: Iba7422d99c0374d4d9e97e6fd47bae129dba5cc9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

* changes:
  plat: marvell: armada: a8k: add OP-TEE OS MMU tables
  drivers: marvell: add support for mapping the entire LLC to SRAM
  plat: marvell: armada: add LLC SRAM CCU setup for AP806/AP807 platforms
  plat: marvell: armada: reduce memory size reserved for FIP image
  plat: marvell: armada: platform definitions cleanup
  plat: marvell: armada: a8k: check CCU window state before loading MSS BL2
  drivers: marvell: add CCU driver API for window state checking
  drivers: marvell: align and extend llc macros
  plat: marvell: a8k: move address config of cp1/2 to BL2
  plat: marvell: armada: re-enable BL32_BASE definition
  plat: marvell: a8k: extend includes to take advantage of the phy_porting_layer
  marvell: comphy: initialize common phy selector for AP mode
  marvell: comphy: update rx_training procedure
  plat: marvell: armada: configure amb for all CPs
  plat: marvell: armada: modify PLAT_FAMILY name for 37xx SoCs

The plat_core_pos_by_mpidr() implementation for the Arm FPGA port has
some issues, which leads to problems when matching GICv3 redistributors
with cores:
- The power domain tree was not taking multithreading into account, so
  we ended up with the wrong mapping between MPIDRs and core IDs.
- Before even considering an MPIDR, we try to make sure Aff2 is 0.
  Unfortunately this is the cluster ID when the MT bit is set.
- We mask off the MT bit in MPIDR, before basing decisions on it.
- When detecting the MT bit, we are properly calculating the thread ID,
  but don't account for the shift in the core and cluster ID checks.

Those problems lead to early rejections of MPIDRs values, in particular
when called from the GIC code. As a result, CPU_ON for secondary cores
was failing for most of the cores.

Fix this by properly handling the MT bit in plat_core_pos_by_mpidr(),
also pulling in FPGA_MAX_PE_PER_CPU when populating the power domain
tree.

Change-Id: I71b2255fc0d27bfe5806511df479ab38e4e33fc4
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

* changes:
  doc: Update arg usage for BL2 and BL31 setup functions
  doc: Update BL1 and BL2 boot flow
  plat/arm: Use only fw_config between bl2 and bl31

Updated the porting guide for the usage of received arguments
in BL2 and BL32 setup functions in case of Arm platform.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia83a5607fed999819d25e49322b3bfb5db9425c0

Updated the document for BL1 and BL2 boot flow to capture
below changes made in FCONF

1. Loading of fw_config and tb_fw_config images by BL1.
2. Population of fw_config and tb_fw_config by BL2.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ifea5c61d520ff1de834c279ce1759b53448303ba

Passed the address of fw_config instead of soc_fw_config
as arg1 to BL31 from BL2 for ARM fvp platform.

BL31 then retrieve load-address of other device trees
from fw_config device tree.
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib7e9581cd765d76111dcc3b7e0dafc12503c83c1

* changes:
  doc: Update memory layout for firmware configuration area
  plat/arm: Increase size of firmware configuration area
  plat/arm: Load and populate fw_config and tb_fw_config
  fconf: Handle error from fconf_load_config
  plat/arm: Update the fw_config load call and populate it's information
  fconf: Allow fconf to load additional firmware configuration
  fconf: Clean confused naming between TB_FW and FW_CONFIG
  tbbr/dualroot: Add fw_config image in chain of trust
  cert_tool: Update cert_tool for fw_config image support
  fiptool: Add fw_config in FIP
  plat/arm: Rentroduce tb_fw_config device tree

Neoverse N1 erratum 1800710 is a Cat B erratum, present in older
revisions of the Neoverse N1 processor core.  The workaround is to
set a bit in the ECTLR_EL1 system register, which disables allocation
of splintered pages in the L2 TLB.

This errata is explained in this SDEN:
https://static.docs.arm.com/sden885747/f/Arm_Neoverse_N1_MP050_Software_Developer_Errata_Notice_v21.pdf

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ie5b15c8bc3235e474a06a57c3ec70684361857a6