GitLab

This API will be used to set a parameter for the PLL. The parameter
value that is set will have effect once the PLL mode is set to integer
or fractional mode. Parameter values represent the values as defined
in the Zynq MPSoC register reference manual ug1087.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

This patch converts Tegra platforms to support native
GICv2 drivers. This involves removes Tegra's GIC driver
port platforms to use interrupt_props

Change-Id: I83d8a690ff276dd97928dc60824a4fd36999bb30
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a macro to allow platforms to compile native
GICv2 drivers along with Tegra handlers.

Change-Id: I8281796c09dae5704cff2daab831395d65e261b7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch allows platforms to define their
own jump table list for library at ROM. The
file has the list of functions to be used
from library at ROM. It can also include
other list files.

Change-Id: I721c35d7dad3dcadbb3a7f3277bfd5d3e1f6e00a
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

As suggested, pass the FDT to BL 33 via x1 instead of x3 , to be
consistent with the other platforms.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

On AARCH32, thumb is used by default, no need to redefine it.
As all our binaries are compiled with thumb, interwork is not needed.
The binaries compiled with or without those flags are the same,
except of course for the date.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Change-Id: Ib7c2529b85bb5930d44907edfc8ead13d3b1ef4d
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM needs to map a number of regions on behalf of the secure partition.
Previously, it used to get a list of them from platform code using the
plat_get_secure_partition_mmap() API. Now it gets them from the resource
description structure.

The SPM<->SP shared buffer is mapped dynamically at EL3. This buffer is
used to pass information between SPM and SP, so it must be mapped at EL3
as well in order to be used by SPM.

Dynamic translation tables have been enabled when the Trusted Firmware
is compiled with SPM support.

Change-Id: I64ad335e931661812a0a60558e60372e1e5e6b72
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Load SP and RD from package instead of relying on RD being already
loaded in memory and the SP being loaded as a BL32 image.

Change-Id: I18d4fbf4597656c6a7e878e1d7c01a8a324f3f8a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This avoids the following warnings:
no previous prototype for 'bl2_arch_setup' [-Wmissing-prototypes]
no previous prototype for 'plat_log_get_prefix' [-Wmissing-prototypes]

Also correct a compilation issue if BL2_IN_XIP_MEM is enabled:
uintptr_t is not defined.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This is used as a table index, and already compared with an unsigned int:
block_dev_count.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This information is retrieved from the resource description now.

Change-Id: Iaae23945eb2c45305cdc6442853e42f4e04fe094
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This information is defined by the Secure Partition in the resource
description.

Change-Id: Ia7db90c5de8360a596106880d3f6a632a88d3ea8
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Introduce helpers to create resource description struct, as well as code
to load the information from DTB files.

Change-Id: I0f5bb94eb8b01c6cb53fe807a9db0c05a70d7a43
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: Iec265dc85d44f35048d1fbcfbe55960d45570027
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch makes the build system link the console framework code by
default, like it already does with other common libraries (e.g. cache
helpers). This should not make a difference in practice since TF is
linked with --gc-sections, so the linker will garbage collect all
functions and data that are not referenced by any other code. Thus, if a
platform doesn't want to include console code for size reasons and
doesn't make any references to console functions, the code will not be
included in the final binary.

To avoid compatibility issues with older platform ports, only make this
change for the MULTI_CONSOLE_API.

Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3
Signed-off-by: Julius Werner <jwerner@chromium.org>

Crash reporting via the default consoles registered by MULTI_CONSOLE_API
has been broken since commit d35cc347

 (Console: Use callee-saved
registers), which was introduced to allow console drivers written in C.
It's not really possible with the current crash reporting framework to
support console drivers in C, however we should make sure that the
existing assembly drivers that do support crash reporting continue to
work through the MULTI_CONSOLE_API.

This patch fixes the problem by creating custom console_putc() and
console_flush() implementations for the crash reporting case that do not
use the stack. Platforms that want to use this feature will have to link
plat/common/aarch64/crash_console_helpers.S explicitly.

Also update the documentation to better reflect the new reality (of this
being an option rather than the expected default for most platforms).

Change-Id: Id0c761e5e2fddaf25c277bc7b8ab603946ca73cb
Signed-off-by: Julius Werner <jwerner@chromium.org>

Commit e74afb65 (Deprecate weak crash console functions) deprecated the
default inclusion of weak definitions for plat_crash_console functions
in plat/common/aarch64/platform_helpers.S. The code was later copied out
to plat/common/aarch64/crash_console_helpers.S so platforms can link it
explicitly if they want to. However, since deprecation does not mean
removal, the same code is also still duplicated in platform_helpers.S.

The duplicated code contains both empty stubs for the !MULTI_CONSOLE_API
case, and a real implementation that used to work but was broken by
commit d35cc347

 (Console: Use callee-saved registers) for
MULTI_CONSOLE_API. It's not great to have both of these duplicated in
two files, so this patch splits them up: in platform_helpers.S we'll
only keep the empty stubs (guarded by !ERROR_DEPRECATED), which should
not regress functionality since the MULTI_CONSOLE_API implementation was
already broken anyway. In crash_console_helpers.S, we'll only keep the
MULTI_CONSOLE_API version, which is enough both as an implementation in
itself and as a sample for how to reimplement these functions in a
platform-specific file.

Change-Id: I83d95a90ab6aac597dc2ea2f2797ac2c8ed075d4
Signed-off-by: Julius Werner <jwerner@chromium.org>

SGI-Clark.Helios platform is similar to SGI-Clark.Ares platform.
The difference between these two platforms is the CPU type and
the number of CPUs. Add the base support for SGI-Clark.Helios platform.

Change-Id: I2b04cb3fb953907848b4fab016e3648899ca4256
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

For SGI-Clark.Helios platform, at present, only the CPU power ON/OFF
ops are supported. So override the PSCI ops to allow callbacks only
for CPU power ON/OFF operations.

Change-Id: Idc0a3deb78cb850310cbe849d77604fa9881579c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

SGI-Clark.Helios platform is based on multi-threaded CPUs and uses an
additional thread power domain level as well.

Define a power domain tree descriptor 'sgi_clark_helios_pd_tree_desc'
for SGI-Clark.Helios platform and let the function
'plat_get_power_domain_tree_desc' pick up the correct power
domain tree descriptor based on the platform.

Change-Id: Ibc6d551b570bc740053316a3608c455679d9155b
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

Generate a /reserved-memory node for FCNL in the DT passed to
subsequent stages, so they will know how the FCNL is configured.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Generate /compatible string for the platform, so that the subsequent
stages know which platform they are running on. This could be useful
when ie. building U-Boot that contains DTs for multiple platforms and
can thus decide on which platform it is running. This would ultimately
allow single bootloader binary for all Gen3 platforms.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Pass DTB containing DRAM layout from BL2 to BL33 via register x3, so
that the BL33 can simply consume it and get accurate DRAM layout info.
BL33 is in most usecases U-Boot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Use array of start-size tuples for the DRAM banks and call single
function which iterates over this array to report the DRAM info.
This is in preparation for expanding this to generate FDT for the
next stage.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Print the DRAM configuration only after the DRAM was initialized. This
will be useful when deduplicating code populating FDT passed to U-Boot,
since it will contain the same macros as bl2_advertise_dram_size().
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Make the DRAM configuration debug print consistent for all supported SoCs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

There is nothing preventing H3 older than v3.0 from printing the
DRAM configuration, just like v3.0 and newer. Drop the check and
let all H3 revisions print DRAM configuration in BL2.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

RCAR_DRAM_DDR3L_MEMCONF = 2 means E3 with 1GBx4 memory configuration.
Add debug print for this configuration for completeness sake.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Just move the DRAM layout information into separate function,
no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

With the two new APIs 'plat_arm_sgi_get_platform_id' and
'plat_arm_sgi_get_config_id' that are available now, BL31 need not
depend on hw_config device tree to identify the platform. In addition
to this, the existing hardware description in hw_config can be limited
to use by BL33 and not by the operating system.

So the hardware description from hw_config dts can be moved into
nt_fw_config dts and the use of hw_config dts can be removed.

Change-Id: I873b7e1e72823d3ec5d253a848e85ae724f09e49
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

i.MX8MQ is new SOC of NXP's i.MX8M family based on
A53. It can provide industry-leading audio, voice
and video processing for applications that scale
from consumer home audio to industrial building
automation and mobile computers

this patchset add the basic supoort to boot up
the 4 X A53. more feature will be added later.
Signed-off-by: Bai Ping <ping.bai@nxp.com>

Sync the platform code version with current Marvell LSP.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Very rarely, during cpuidle operations the following error
is seen: "PM MSG Trigger Timeout".
This is caused by slow handling of message interrutps
in the PM FW running on CM3 (under heavy PM operation load).

This is not a real issue, so we extend the timeout to
avoid the error prints.

Change-Id: I92fd6f2ff1ddf208b216c123880ded28a00b6e0e
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/59670

Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: iSoC Platform CI <ykjenk@marvell.com>

Add static configuration for SFI+ 10Gbps interface on SERDES
Lane 4.
This is just a copy of Lane 2 static values, not optimized.
Board-to-board iperf test shows up to 6Gbps transfer speed.

Change-Id: I024d2ac132f7fa6c342a64367f3dca2123a27e97
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>

- Number of open power switches for CPUs should be three
  and now two.

- This patch updates the value of open power switches from
  0xfd (two power-switches) to 0xfc (three power-switches).

Change-Id: I2783ab7f04bbbb6da78eeedcabe4636f9a774512
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Add support for SVC test builds for tuning AVS values.
Update the SVC procedure and add EEPROM access.
Add support for AP807 AVS values (10 bits wide).
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

- Update CPU frequency on AP807 to 2GHz for SAR 0x0.
- Increase AVS to 0.88V for 2GHz clock

Change-Id: Ic945b682ab2f8543e34294bfc56c3eae2c5e0c8e
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

In Armada 8K DB boards, PCIe initialization can be executed only once
because PCIe reset performed during chip power on and it cannot be
executed via GPIO later.
This means that power on can be executed only once, when it's called
from the bootloader.
Power on:
	Read bit 21 of the mode, it marks if the caller is
	the bootloader or the Linux Kernel.
Power off:
	Check if the comphy was already configured to PCIe, if yes,
	check if the caller is bootloader, if both conditions are true
	(PCIe mode and called by Linux) - skip the power-off.

In addition, fix incorrect documentation describing mode fields -
PCIe width is 3 bits, not 2.

NOTE: with this patch, please use LK4.14.76 (LK4.4.120 may not work
with it).

Change-Id: I4b929011f97a0a1869a51ba378687e78b3eca4ff
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Do not power off the CPU1 since there is no way to wake it up
(wake-up is causing CPU0 reset as well duo to HW bug). Quote from errata
Ref #13 [In power saving mode, both cores must be powered off]:
"When Core 0 is on and Core 1 is in power-off state, a Core 1
wake-up resets Core 0 as well and puts Core 0 back to ROM".

To overcome described HW bug instead of powering the CPU off, let it
reach WFI instruction, which is invoked by generic psci_do_cpu_off
function after platform handler finishes. This will put the core in low
power state and give a chance to wake it up.

Before this change, after running secondary kernel via kexec, only one
core was up, now both cores are up.

Change-Id: I87f144867550728055d9b8a2edb84a14539acab7
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>